Question
In: Electrical Engineering
Q20 (a) A step down chopper circuit is supplied with power from an ideal voltage source...
Q20 (a) A step down chopper circuit is supplied with power from an ideal voltage source of terminal voltage 100 V. The load voltage waveform consist of rectangular pulses across a 1kΩ resistor of duration 1ms in one cycle of 2.5 ms. Calculate the average value.rms value & ripple factor
(b) Explain a 1-ф full wave controlled semi converter with freewheel diode for RLE load. (12 Mark)
Solutions
Manojponduru answered 1 year agoRelated Solutions
Consider an ideal down converter supplying load resistance of 80 ohms from a voltage source rated...
Consider an ideal down converter supplying load resistance of 80
ohms from a voltage source rated 9V and 250mA. The converter
operates at 70-kHz and is designed for 5% voltage ripple and 10%
current ripple with a duty time of 60%.
a) Calculate the output voltage, output voltage ripple, output
current and output current ripple.
b) Calculate the cycle period, T on and T off.
c) Calculate the required inductance and capacitance values
d) Calculate the output voltage as functions...
An RLC circuit consists of an AC voltage source with a maximum voltage of 122 Volts...
An RLC circuit consists of an AC voltage source with a maximum
voltage of 122 Volts connected in series to a resistor, a
capacitor, and an inductor. At the resonant frequency, the
inductive reactance is 13 Ohms and the total impedance of the
circuit is 23 Ohms. What is the average power produced by the
battery at 2.6 times the resonant frequency in Watts?
An RLC circuit consists of an AC voltage source with a maximum voltage of 135 Volts...
An RLC circuit consists of an AC voltage source with a maximum
voltage of 135 Volts connected in series to a resistor, a
capacitor, and an inductor. At the resonant frequency, the
inductive reactance is 15 Ohms and the total impedance of the
circuit is 24 Ohms. What is the average power produced by the
battery at 2.6 times the resonant frequency in Watts?
Develop a series RLC circuit that increases the capacitor voltage to the source voltage as fast...
Develop a series RLC circuit that increases the capacitor
voltage to the source voltage as fast as possible with no more than
a 20% overshoot. The source voltage is 99V, the capacitance is 9F
the and the inductance is 23 H. You can adjust the resistance since
that the inductance are the two easiest parameters to adjust. I
suggest you find ω0 for your circuit and the value of R that
results in a critically damped circuit. Plot this vs....
l. what is the difference between a real independent voltage source and an ideal independent voltage...
l. what is the difference between a real independent voltage
source and an ideal independent voltage source? Give an example of
a real voltage source and explain how it differs from the
ideal.
2. What does it mean when we say that a circuit containing
multiple sources is invalid?Give an example of such a circuit and
explain why it is invalid.
3. What is resistance? What is a node? What is a closed
loop?
4. Write the equations for Ohm's...
Consider a circuit with an ideal ac generator with peak voltage of V0 connected to an...
Consider a circuit with an ideal ac generator with peak voltage
of V0 connected to an inductor with inductance L, a capacitor with
capacitance C, and resistor with resistance R connected in series.
Draw the circuit and use Kirchoff’s laws to find the equation for
the voltage drop along the circuit.
Consider a circuit with an ideal ac generator with peak voltage of V0 connected to an...
Consider a circuit with an ideal ac generator with peak
voltage of V0 connected to an inductor with
inductance L, a capacitor with capacitance C, and resistor
with resistance R connected in series.
what is the voltage drop along the circuit?
Consider a simple RL circuit consisting of an ideal battery with voltage 30 V , a...
Consider a simple RL circuit consisting of an ideal battery with
voltage 30 V , a resistor of resistance 15 Ω, an inductor of
inductance 7.0 H, and a switch all in series. The switch is
initially open. a) Determine the ratio of the voltage across the
resistor to the voltage across the inductor when the current has a
value of 1.5 A. b) How much time has elapsed if the voltage across
the resistor is 20 V ?
A series ac circuit consists of a voltage source of frequency f = 60 Hz and...
A series ac circuit consists of a voltage source of frequency f
= 60 Hz and source voltage amplitude 345 volts, a resistor of
resistance R = 255 Ω, a capacitor of capacitance C = 6.2×10−6F, and
an inductor of inductance L.
(a) What must be the value of L for the phase angle Φ to be
zero?
(b) When L has the value calculated in (a), what is the current
amplitude in the circuit?
1. Why don’t the short circuit and open circuit voltage produce power in a p-n cell?...
1. Why don’t the short circuit and open circuit voltage produce
power in a p-n cell?
2. The power supplied by a solar cell is proportional to its
surface area. Using the flux of solar energy under AM1 conditions,
estimate the power a 1-cm2 solar cell will yield. State
explicitly any assumption you make.
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- Explain the use of neural networking modeling in predictive analytics.
- Current Market Mix of Netflix, as detail as possible, please.
- This is all one question, thank you so much in advance! You must evaluate a proposal...
- X Company is considering the purchase of a new processor that costs $200,000. Shipping and setup...
- There are a large number of tasks involved in information technology and programming, and many of...
- Using one quantitative and one qualitative health policy research method described in this chapter, design a...
- What is the Rawls' solution to the age-old question of social (economic / distributive) justice?...
ADVERTISEMENT