Water at 300kPa and 20oC is heated in a chamber by mixing it with superheated steam...

Water at 300kPa and 20^oC is heated in a chamber by mixing it with superheated steam at 300kPa and 300^oC. The cold water enters the chamber at a rate of 1.9 kg/s. Calculate the mass flow rate of the superheated steam, if the mixture leaves the chamber at 60^oC.

answer is ______kg/s

If necessary, define system and energy flows shown on sketch. Complete solution shown analytically before numbers.

Expert Solution

samet mamat answered 2 years ago

Water is heated in a mixing chamber by mixing it with hot water coming from a...

Water is heated in a mixing chamber by mixing it with hot water coming from a heater. The mixing chamber loses heat to the surroundings at a rate of 5 kW. The hot water enters the mixing chamber at a rate of 1 kg/s. The mixed water leaves the chamber fully mixed. - The cold water enters the mixing chamber at 200 kPa and 20°C at a velocity of 3 m/s - The hot water enters at a pressure of...

Water at 80°F and 20 psia is heated in a chamber by mixing it with saturated...

Water at 80°F and 20 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. If both streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. Include a heat loss rate of 200 kW and a net mass flow rate of the combined streams of 4 lbm/s.

Liquid water at 15 ℃ is heated by mixing it with saturated steam at the same...

Liquid water at 15 ℃ is heated by mixing it with saturated steam at the same pressure. Liquid water enters a chamber at a rate of 4.3 kg/s and saturated steam enters at a rate of 0.17 kg/s. The mixture leaves the mixing chamber as a saturated liquid at 40℃. If the surroundings are at 15℃, determine (a) the temperature of the saturated steam entering the chamber, (b) the exergy destruction during this mixing process, and (c) the second-law efficiency...

In a thermally isolated mixing chamber cold water at 50oC and 1MPa is heated steadily by...

In a thermally isolated mixing chamber cold water at 50oC and 1MPa is heated steadily by a steam at 200oC and 1MPa. The mixture leaves the chamber at 150oC. 1.mass ratio of the hot and cold streams 2 entropy generation rate per unit cold water mass flow rate

A gallon of water is heated-up from room temperature (20oC) to its boiling temperature of 100...

A gallon of water is heated-up from room temperature (20oC) to its boiling temperature of 100 oC at atmospheric pressure. The water is further heated and completely transforms into vapor at which point the heating is stopped. What is the temperature of the steam? A)T=100oC B) T > 100 oC C) T < 100 oC

calculate the amount of energy required to convert saturated water at 150 kpa to superheated steam...

calculate the amount of energy required to convert saturated water at 150 kpa to superheated steam at 180 C and at the same pressure.

A 8.40-g sample of solid BaCl2·2H2O was heated such that the water turned to steam and...

A 8.40-g sample of solid BaCl2·2H2O was heated such that the water turned to steam and was driven off. Assuming ideal behavior, what volume would that steam occupy at 1.00 atm and 100.0 °C?

A 9.10-g sample of solid MnCl2·4H2O was heated such that the water turned to steam and...

A 9.10-g sample of solid MnCl2·4H2O was heated such that the water turned to steam and was driven off. Assuming ideal behavior, what volume would that steam occupy at 1.00 atm and 100.0 °C?

A steam engine takes in superheated steam at 270 degree Celsius, and discharges condensed steam from...

A steam engine takes in superheated steam at 270 degree Celsius, and discharges condensed steam from its cylinder at 50 degree Celsius. The engine takes 50 kJ heat from the hot steam per cycle and does 15 kJ of work per cycle. (a) Whats the efficiency of the engine? (b) If someone claims that 60 kJ heat were taken in per cycle by another engine operating at these same temperatures and the engine can generate 30kJ work per cycle, do...

An adiabatic mixing chamber with operating pressure of 180 kPa is used to mix cold water...

An adiabatic mixing chamber with operating pressure of 180 kPa is used to mix cold water and hot water. The hot water enters at 80°C with mass flow rate of 4.1 kg/s. The cold water enters the chamber at 39°C and the mixture leaves at a temperature of 45°C. Determine (a) the mass flow rate of the cold water and (b) the rate of entropy generation during this process.

Question