A gallon of water is heated-up from room temperature (20oC) to its boiling temperature of 100...

A gallon of water is heated-up from room temperature (20oC) to its boiling temperature of 100 oC at atmospheric pressure.

The water is further heated and completely transforms into vapor at which point the heating is stopped.

What is the temperature of the steam?
A)T=100oC
B) T > 100 oC
C) T < 100 oC

Expert Solution

genius_generous answered 2 years ago

100 grams of boiling water (temperature 100

A cup of coffee is made with boiling water at 100 and stands in a room...

A cup of coffee is made with boiling water at 100 and stands in a room where the temperature is 25. The change in temperature, H in degrees , with respect to time t, in minutes, is given by the following differential equation. (dH)/(dt)=-k(H-25) Solve this differential equation. If the coffee cools to 90 in 3 minutes, how long will it take to cool to 60 degrees? Round your answer to the nearest integer.

Water at 300kPa and 20oC is heated in a chamber by mixing it with superheated steam...

Water at 300kPa and 20oC is heated in a chamber by mixing it with superheated steam at 300kPa and 300oC. The cold water enters the chamber at a rate of 1.9 kg/s. Calculate the mass flow rate of the superheated steam, if the mixture leaves the chamber at 60oC. answer is ______kg/s If necessary, define system and energy flows shown on sketch. Complete solution shown analytically before numbers.

If we want to only use frozen water (ice) and room temperature water (room temperature water...

If we want to only use frozen water (ice) and room temperature water (room temperature water of four times the mass of the ice), write out the various forms of heat transfer that will occur between frozen water and room temperature water, when the come into contact. Hint: There will be one term of heat transfer from the room temperature water, and three terms of heat transfer in the ice/cold water.

For toluene determine: a) Vapor pressure at 100 ° C. b) Its boiling temperature at a...

For toluene determine: a) Vapor pressure at 100 ° C. b) Its boiling temperature at a pressure of 530 torr. c) Draw the liquid-vapor equilibrium curve from 13 to 136 ° C.

How much heat energy is required to warm up 2.35 kg of water, from 20oC to...

How much heat energy is required to warm up 2.35 kg of water, from 20oC to 83oC ? Need to show unit conversion and all referents in calculation.

If 1080 steel was heated to 1000 degree and then aircooled in the room temperature, 1080...

If 1080 steel was heated to 1000 degree and then aircooled in the room temperature, 1080 steel has lower strength, what additional heat treatment do you recommend to gain strength? Explain in terms of microstructure theory why this is the case. How else could we change our material to increase strength? Explain in terms of microstructural theory why this is the case

Boil water in a bowl and cool in a room. The air temperature in the room...

Boil water in a bowl and cool in a room. The air temperature in the room is increasing linearly according to the function Ta (t) = 22 + 0.015t (t in minutes, T in ° C). Assume that Newton's Law of Cooling is satisfied: the rate of change of water temperature is proportional to the difference between the temperature of the water and the temperature of the environment. We take the water temperature after 8 minutes and find that it...

Water heater In a water heater, tap water with the temperature 10 degrees celcius is heated...

Water heater In a water heater, tap water with the temperature 10 degrees celcius is heated to 60 degrees celcius. For a shower, a total of 20 litres of water is used. Water from the water heater is mixed with tap water to reach the temperature 35 degrees celcius when one showers. How much ENERGY is needed to heat 10 litres of water from 10 celcius to 60 celcius? How much EXERGY is needed to heat 10 litres of water...

A 91.70 g sample of metal was heated in a boiling water bath at 99.4 °C....

A 91.70 g sample of metal was heated in a boiling water bath at 99.4 °C. The hot metal was then placed in a calorimeter, with heat capacity 39 J/K containing 45.0 g of water. Analysis of the thermogram showed the initial temperature to be 21.1°C, the final temperature to be 42.3°C. 4.91 g of LiCl was dissolved in 50.0 mL of water in the same calorimeter as in problem (above) 1. Analysis of the thermogram showed the initial temperature...

Question