Question

In: Mechanical Engineering

14. Sacrificial anodes are bolted inside the_____ of a heat exchanger 15. Sacrificial anodes minimize______ within...


14. Sacrificial anodes are bolted inside the_____ of a heat exchanger

15. Sacrificial anodes minimize______ within a heat exchanger

17. The two factors that determine the choice of tools and equipment for a specific heat exchanger
of a heat exchanger maintenance job are familiarity with the (a)________ and knowledge of the (b)______

18. Blockage in a shell-and-tube heat exchanger may range from relatively light accumulations of (a)_______ and (b)_______ to heavy blockage caused by (c)_______ in cooling water

22. Automatic cleaning systems work by either (a)________or (b)_______ means

23. Some automatic chemical cleaning systems periodically introduce chlorine into the incoming water to kill________ and prevent growth on tube walls

25. When a main condenser is to be flooded, jack or supports may be necessary to________

26. Maintenance of smaller heat exchangers is approached differently from large heat exchangens because the smaller components are (a)______ and can be moved by (b)______

Solutions

Expert Solution

The answers are:
14. Sacrificial anodes are bolted inside the WALLS of a heat exchanger.
15. Sacrificial anodes minimize CORROSION (Sacrificial anodes work by oxidizing more quickly than the metal it is protecting, being consumed completely before the other metal reacts with the electrolytes) within a heat exchanger
17. The two factors that determine the choice of tools and equipment for a specific heat exchanger
of a heat exchanger maintenance job are familiarity with the (a) HEAT EXCHANGER and knowledge of the (b) TYPE OF DEPOSITS (Although aim of maintenance remains the same that is cleaning of heat transfer surfaces to prevent any kind of obstruction in the flow process).

18. Blockage in a shell-and-tube heat exchanger may range from relatively light accumulations of (a)SCALE DEPOSITS and (b)COROSSION to heavy blockage caused by (c) DISSOLVED SALTS in cooling water

22. Automatic cleaning systems work by either (a)INTERNAL (chemical) or (b) EXTERNAL (mechanical) means

23. Some automatic chemical cleaning systems periodically introduce chlorine into the incoming water to kill bacteria, algae, slime, mollusks, barnacles and sponges and prevent growth on tube walls

25. When a main condenser is to be flooded, jack or supports may be necessary to ARREST THE SPRING ACTION.

26. Maintenance of smaller heat exchangers is approached differently from large heat exchangers because the smaller components are (a) delicate and can be moved by (b) light pressure.



Related Solutions

What is the process occurring inside the Shell and Tube Heat Exchanger and what is the...
What is the process occurring inside the Shell and Tube Heat Exchanger and what is the driving force?
HEAT TRANSFER: HEAT EXCHANGER Oil flows in a heat exchanger with a mass flow rate of...
HEAT TRANSFER: HEAT EXCHANGER Oil flows in a heat exchanger with a mass flow rate of 20 kg/s and is to be cooled from 175 to 65°C with water as a coolant flowing at a rate of 30 kg/s and an inlet temperature of 12°C. The overall heat transfer coefficient is U = 1250 W/m2⋅K. a) Sketch the temperature profile and calculate the mean temperature for parallel flow, counter flow, and cross flow heat exchangers.. b) Determine the area required...
The air inside inside a house is 14 oC and the convective heat transfer coefficient h...
The air inside inside a house is 14 oC and the convective heat transfer coefficient h = 11 W/m2⋅°C. The air outside the house is 49 oC and the convective heat transfer coefficient h = 7 W/m2⋅°C. A window has dimensions (2m x 2.5m x 8mm) and heat conduction of 0.8W/mk. Determine the total heat resistance through the window in oC/W
Cold water inside / outside diameter in the same axis two pipe heat exchanger used as...
Cold water inside / outside diameter in the same axis two pipe heat exchanger used as engine oil cooler It enters the 25/30 mm steel pipe at a temperature of 15 degrees at a speed of 0.5 m / s, Take off at a temperature of 25 degrees.Hot oil, on the inside / outside diameter of 40/46 mm steel pipe, at a temperature of 60 degrees with a speed of 0.25 m / s. enters.it is desired to cool the...
Subject: Heat exchanger Lab Question: 1.1) in heat exchanger analysis, the following quantities are used. Explain...
Subject: Heat exchanger Lab Question: 1.1) in heat exchanger analysis, the following quantities are used. Explain what each means and give a formula for each. Assume the mass flow rates, fluid properties, inlet, temperatures, and length and diameters of the heat exchanger are known. a) Overall heat transfer coefficient. UA. b) A number of transfer units, NTU. c) Effectiveness, e 1.2) what is the hydraulic diameter and why is it useful for double-pipe heat exchanger analysis?
What is called Supertargetting in Heat Exchanger Network Design? How Heat Exchanger Network Design can be...
What is called Supertargetting in Heat Exchanger Network Design? How Heat Exchanger Network Design can be done by paying attention to Supertargetting?
LMTD of a cross-flow heat exchanger is
LMTD of a cross-flow heat exchanger is
A shell and tube heat exchanger is to be desined by kern's method to heat Toluene....
A shell and tube heat exchanger is to be desined by kern's method to heat Toluene. Toulene: T(in)=100F, T(out)=257F, flowrate=125000Ib/hr P(in)=90Psia composition:100% Toluene. Styrene: T(in)=300F, T(out)=176F, P(in)=50psia composition:100% Styrene What is the mass flow rate of Styrene? Which fluid should be in the shell side and which should be in the tube side and why?
define heat exchanger mechanical flow switch
define heat exchanger mechanical flow switch
A heat exchanger purchased by Hot Spot Manufacturing cost $24,000. The exchanger will save $4,500 in...
A heat exchanger purchased by Hot Spot Manufacturing cost $24,000. The exchanger will save $4,500 in each of the next 10 years. Hot Spot will use SOYD depreciation over a six-year depreciable life. The declared salvage value is $3,000. It is expected the exchanger will be sold for the declared value. Hot Spot pays taxes at a combined rate of 42% and has a MARR of 8%. Was the purchased justified?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT