Question

In: Physics

1) An evacuated tube uses an accelerating voltage of 44 kV to accelerate electrons to hit...

1) An evacuated tube uses an accelerating voltage of 44 kV to accelerate electrons to hit a copper plate and produce X-rays. Ignoring relativistic effects, what would be the maximum speed of these electrons?

2) A battery-operated car uses a 12.0-V system. Find the charge the batteries must be able to move in order to accelerate the 600 kg car from rest to 30.0 m/s.

3) I want to accelerate an electron to the speed of sound (343 m/s) by electrostatic force alone. To do so I’ve devised a way to store as much charge as I’d like at a single fixed point which will be located 0.35 m from the electron. How much charge do I need to accumulate to accomplish my goal?

Solutions

Expert Solution


Related Solutions

In a TV picture tube the accelerating voltage is 17.0 kV, and the electron beam passes...
In a TV picture tube the accelerating voltage is 17.0 kV, and the electron beam passes through an aperture 0.40 mm in diameter to a screen 0.230 m away. What is the uncertainty in position of the point where the electrons strike the screen?
The electron gun in a television tube uses a uniform electric field to accelerate electrons from...
The electron gun in a television tube uses a uniform electric field to accelerate electrons from rest to 4.7×107 m/s in a distance of 1.3 cm . What is the electric field strength?
1. In an x-ray tube, electrons are accelerated in a uniform electric field and then strike...
1. In an x-ray tube, electrons are accelerated in a uniform electric field and then strike a metal target. Suppose an electron starting from rest is accelerated in a uniform electric field directed horizontally and having a magnitude of 2500N/C . The electric field covers a region of space 12.0cm  wide. Part A What is the speed of the electron when it strikes the target? Express your answer with the appropriate units. Part B How far does it fall under the...
A synchronous generator has parameters as shown in table below. 1. Voltage Rating 30 kV, 3-phase...
A synchronous generator has parameters as shown in table below. 1. Voltage Rating 30 kV, 3-phase 5. Frequency 50 Hz 2. Power Rating 50 MVA 6. Rotor Round 3. Synchronous Reactance, XS 7 Ω /phase 7. Connection STAR 4. Armature resistance, Ra 1.5 Ω /phase 8. Excitation Type Permanent Magnet An inductive load of 30MW at 0.8 power factor at rated terminal voltage is connected to the synchronous generator to an infinite bus. Determine the excitation voltage per phase and...
1. If you know the measured electrical voltage and the cross-sectional area of the pipe/tube you...
1. If you know the measured electrical voltage and the cross-sectional area of the pipe/tube you can determine the volume? T/F 2. In order to use the electromagnetic type of meter what kind of fluid must be flowing through the meter in order to induce an electrical voltage between the electrodes? T/F 3. By increasing the cross-sectional area of the restriction, one can significantly increase the flow velocity. T/F 4. The higher the flow velocity and the resulting pressure drop...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT