Question

In: Statistics and Probability

An industrial engineer employed by a beverage bottler is interested in the effects of two different...

An industrial engineer employed by a beverage bottler is interested in the effects of two different types of 32-ounces bottles vs the potential fatigue differences resulted from delivering 12-bottle cases of the product. The two bottle types are glass and plastic. Two workers are used to perform the task that consists of moving 40 cases of the product 50 feet on a standard type of hand truck and then, stacking the cases in a display.

As a measured of the amount of effort required, he measured the elevation of the heart rate (BPM) induced by the task. Use a confidence level of 95%. The results follow.

Bottle type

Worker 1

Worker 2

Glass

69

75

70

63

88

65

66

61

Plastic

74

65

63

60

72

51

66

65
  1. Estimate the factor effects. What effects appear to be larger?

  2. Use the analysis of variance to compare your conclusions for part (a).

  3. Analyze the residuals. Are there any obvious problem

  4. Based on an analysis of main effect and interaction plots, what factor levels would you recommend using? Explain.

Solutions

Expert Solution

orchestra answered 1 year ago
Next > < Previous

Related Solutions

6.13 An industrial engineer employed by a beverage bottler is interested in the effects of two...
6.13 An industrial engineer employed by a beverage bottler is interested in the effects of two different types of 32‐ounce bottles on the time to deliver 12‐bottle cases of the product. The two bottle types are glass and plastic. Two workers are used to perform a task consisting of moving 40 cases of the product 50 feet50 feet on a standard type of hand truck and stacking the cases in a display. Four replicates of a 2222 factorial design are...
A technical engineer is interested in understanding the battery life of two different laptops for student...
A technical engineer is interested in understanding the battery life of two different laptops for student usage at a community college in California. The two models he has are Madroid and Krapple. He randomly assigned students to one of the laptop models and recorded the number of minutes the students were able to use the computer until the battery ran out. Below is the data collected. Student # Madroid Krapple 1 540 575 2 380 525 3 420 583 4...
A technical engineer is interested in understanding the battery life of two different laptops for student...
A technical engineer is interested in understanding the battery life of two different laptops for student usage at a community college in California. The two models he has are Madroid and Krapple. He randomly assigned students to one of the laptop models and recorded the number of minutes the students were able to use the computer until the battery ran out. Below is the data collected. Student # Madroid Krapple 1 540 575 2 380 525 3 420 583 4...
A technical engineer is interested in understanding the battery life of two different laptops for student...
A technical engineer is interested in understanding the battery life of two different laptops for student usage at a community college in California. The two models he has are Madroid and Krapple. He randomly assigned students to one of the laptop models and recorded the number of minutes the students were able to use the computer until the battery ran out. Below is the data collected. Student # Madroid Krapple 1 540 575 2 380 525 3 420 583 4...
DOE SIX SIGMA Factorial Design (DOE) An engineer is interested in the effects of cutting speed...
DOE SIX SIGMA Factorial Design (DOE) An engineer is interested in the effects of cutting speed (A), tool geometry (B), and cutting angle (C) on the life (in hours) of a machine tool. Two levels of each factor are chosen, and three replicates of a 23 factorial design are run. The results show the averages of the three replicates A B C Mean - - - 26.00 + - - 34.67 - + - 39.67 + + - 49.33 -...
An industrial engineer is considering two assets to be purchased by a company. Asset A will...
An industrial engineer is considering two assets to be purchased by a company. Asset A will have an initial cost of $90,000, an annual operating and maintenance cost of $32,000, and a $6,000 salvage value. Asset B will have a first cost of $135,000, an annual operating and maintenance cost of $25,000, and a $17,500 salvage value. Which one should be selected? Use a 15-year study period and an annual interest rate of 8%. Draw the cash flow diagrams. Always...
Three different methods for assembling a product were proposed by an industrial engineer. To investigate the...
Three different methods for assembling a product were proposed by an industrial engineer. To investigate the number of units assembled correctly with each method, 30 employees were randomly selected and randomly assigned to the three proposed methods in such a way that each method was used by 10 workers. The number of units assembled correctly was recorded, and the analysis of variance procedure was applied to the resulting data set. The following results were obtained: SST=10,740; SSTR=4,540 a. Set up...
Three different methods for assembling a product were proposed by an industrial engineer. To investigate the...
Three different methods for assembling a product were proposed by an industrial engineer. To investigate the number of units assembled correctly with each method, 30 employees were randomly selected and randomly assigned to the three proposed methods in such a way that each method was used by 10 workers. The number of units assembled correctly was recorded, and the analysis of variance procedure was applied to the resulting data set. The following results were obtained: SST is 10, 760 SSTR...
Three different methods for assembling a product were proposed by an industrial engineer. To investigate the...
Three different methods for assembling a product were proposed by an industrial engineer. To investigate the number of units assembled correctly with each method, 30 employees were randomly selected and randomly assigned to the three proposed methods in such a way that each method was used by 10 workers. The number of units assembled correctly was recorded, and the analysis of variance procedure was applied to the resulting data set. The following results were obtained: SST is 10, 760 SSTR...
Three different methods for assembling a product were proposed by an industrial engineer. To investigate the...
Three different methods for assembling a product were proposed by an industrial engineer. To investigate the number of units assembled correctly with each method, 30 employees were randomly selected and randomly assigned to the three proposed methods in such a way that each method was used by 10 workers. The number of units assembled correctly was recorded, and the analysis of variance procedure was applied to the resulting data set. The following results were obtained: SST = 10,780; SSTR =...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT