Question

In: Mechanical Engineering

Quastion 1: choose the right answer for the following questions: a) Euler’s equation arises from neglecting...

Quastion 1:

choose the right answer for the following questions:

a) Euler’s equation arises from neglecting the …………. Terms in the more general Navier-Stokes equations.

1- Density 2- Pressure 3-Viscosity 4-None

b) A……………. is used to decelerate a flowing fluid to zero by a frictionless process, thereby allowing the measurement of stagnation pressure.

1-Static pressure probe 2-pitot tube 3-orifice plate 4-none

c) There is a flow probe that depend on 5 parameters and has 3 independent Dimensions. How many pi parameters will that flow problem have?

1-3 2-5 3-2 4-Not enough information

D) The Reynolds number compares initial to ……   effect in a flow problem.

1- Pressure 2- Surface tension 3-Viscus 4- none  

Solutions

Expert Solution

a) Euler’s equation arises from neglecting the 3-Viscosity Terms in the more general Navier-Stokes equations.

b) A…1-Static pressure probe…………. is used to decelerate a flowing fluid to zero by a frictionless process, thereby allowing the measurement of stagnation pressure

explanation: When the flow from a reservoir takes place isentrpoically, the static pressure record of the fluid in the reservoir indicates the stagnation pressure of the fluid. This situation of measuring pressure is analogous when the flowing stream is brought to rest isentropically

c) There is a flow probe that depend on 5 parameters and has 3 independent Dimensions. How many pi parameters will that flow problem have?

ans : no of pi parameter two that is (n-m)

D) The Reynolds number compares initial to …3-Viscus…   effect in a flow problem.


Related Solutions

Answer all the following questions: - I- Choose the best correct answer:    1- The ……………...
Answer all the following questions: - I- Choose the best correct answer:    1- The …………… defect is a ……………… defect which refers to the presence of a pair of vacant sites. A) Schottky, stoichiometric B) Schottky, non-stoichiometric    C) Frenkel, non-stoichiometric D) Frenkel, stoichiometric 2- ……………….. is a powerful method for the determination of phase diagrams, especially in conjunction with other techniques, such as ……………………. for phase identification. A) in order; DTA/DSC, XRD B) in order; DTA/DSC, TGA C)...
Question 1 Choose from the following to answer Questions: 1 sample Z-test of μ 1 sample...
Question 1 Choose from the following to answer Questions: 1 sample Z-test of μ 1 sample T-test of μ 1 sample Z-test of p 1 sample T-test of p 2 sample Z-test of p 2 sample T-test for μ1-μ2 independent 2 sample Z-test for μ1-μ2 independent 2 sample T-test for μ1-μ2 matched pairs 2 sample T-test for p1-p2 Chi-squared test of independence Chi-squared Goodness of fit test Regression test for the slope ANOVA test for multiple means A) A Polisci...
Think about the following questions : 1. First, answer Daniels question. Is there a right to...
Think about the following questions : 1. First, answer Daniels question. Is there a right to healthcare and, if so, what does it encompass? Think about it in terms of the limits to the right to healthcare. Should everything be covered? What should or shouldn't be covered by health ihsurance? Do we all have the same right to healthcare ? If not, why not? 2. Is healthcare rationing morally permissible? If so, under what circumstances? If not, what is the...
The following integral equation for f : [-a, a] -----> R  arises in a model of the...
The following integral equation for f : [-a, a] -----> R  arises in a model of the motion of gas particles on a line:
Choose from the following to answer questions 1-4. Answer choices:  A. at rest   B. moving backwards   C. moving forward...
Choose from the following to answer questions 1-4. Answer choices:  A. at rest   B. moving backwards   C. moving forward                             D. 0          E.  < 0.2 m/s         F. 0.2 m/s         G. > 0.2 m/s If wagon 1, initially moving in the forward direction with velocity v1i = 0.2 m/s, collides with wagon 2, mass m2,  which is initially at rest, v2i = 0,  then If the collision is elastic and the wagons have equal mass,  m1 = m2 , then after the collision wagon 1 is  _____ with v1f  _____, and wagon 2 is  ______...
Given the following estimated demand equation Answer the following questions “From the data for 50 States...
Given the following estimated demand equation Answer the following questions “From the data for 50 States in the United States , the following Regression Equation was estimated: Ln C =    5.75 – 1.29 LnP + 0.67 LnY - 0.022LnA - 0.03LnExcT T- Stats:    (0.91) (1.45)       (2.45)   (1.02)             (2.04)           R2 = 0.87; T- table value at 95%; and 46 degrees of freedom is 1.96. Where C = Cigarette consumption packs per year    P = real...
Given the following estimated demand equation Answer the following questions “From the data for 50 States...
Given the following estimated demand equation Answer the following questions “From the data for 50 States in the United States for 2015, the following Regression Equation was estimated: Ln C =             5.75 – 1.29 LnP + 0.67 LnY - 0.022LnA - 0.03LnExcT T- Stats:           (0.91) (1.45)       (2.45)           (1.02)          (2.04)                             R2 = 0.87; T- table value at 95%; and 46 degrees of freedom is 1.96. Where C = Cigarette consumption packs per year             P = real...
Answer the following questions pertaining to the following equation. 4Ga + 3S2 -> 2Ga2S3 1. How...
Answer the following questions pertaining to the following equation. 4Ga + 3S2 -> 2Ga2S3 1. How many moles of Sulfur are needed to react with 12.5 moles of Gallium 2. How many moles of Sulfur are needed to react with 100.0 grams of Gallium? 3. How many grams of Gallium burned if 200.0 grams of aluminum oxide formed? 4. How many grams of Gallium Sulfide would form if 20.5 moles of Gallium burned?
Answer the questions completely with complete calculations. 1. Balance the following equation & fill in the...
Answer the questions completely with complete calculations. 1. Balance the following equation & fill in the state of the chemicals. a. Fe2 (SO4)3 (aq) + NH3 (aq) + H2O (l) --> Fe (OH)3 ( ) + (NH4)2SO4 ( ) 2. How many atoms of oxygen are present in 1.75 g sample of Fe2 (SO4)3? 3. Calculate the percentage of Cl by mass in PCl5 4. Predict whether each of the following ionic compounds is likely to be water soluble. KCl...
Plot the Euler’s Method approximate solution on [0,1] for the differential equation y* = 1 +...
Plot the Euler’s Method approximate solution on [0,1] for the differential equation y* = 1 + y^2 and initial condition (a) y0 = 0 (b) y0 = 1, along with the exact solution (see Exercise 7). Use step sizes h = 0.1 and 0.05. The exact solution is y = tan(t + c)
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT