Question
In: Other
An equimolar liquid mixture of Benzene (B) and Toluene (T) at 20oC is fed continuously to...
An equimolar liquid mixture of Benzene (B) and Toluene (T) at 20oC is fed continuously to a flash drum in which is heated to 60 oC. The liquid product is 40 mole % B and the vapour product is 60 mole % B. How much heat must be transferred to the mixture 100 mol of feed.
Solutions
Amanda K answered 1 year agoRelated Solutions
An equimolar liquid mixture of benzene and toluene at 10C is fed continuously to a vessel...
An equimolar liquid mixture of benzene and toluene at 10C is
fed continuously to a vessel in which mixture is heated to 50C. The
liquid product is 40 mole%B and the vapor product is 68.4% B. How
much heat must be transferred to the mixture per mol of
feed?
A vessel contains a mixture of equimolar liquid benzene and liquid toluene that is in equilibrium...
A vessel contains a mixture of equimolar liquid benzene and
liquid toluene that is in equilibrium with their vapors and air.
The temperature of the mixture is 40 degrees celsius. The mole
fraction of air in the vapor phase is .6 or 60%. What is the total
pressure and the mole fraction of benzene in the vapor phase?
A benzene/toluene liquid mixture consisting of 31 mole% benzene is fed to a reboiler, where 1250...
A benzene/toluene liquid mixture consisting of 31 mole% benzene
is fed to a reboiler, where 1250 KW of heat is provided causing the
mixture to partially vaporize. The vapor output has a flowrate of
80 kmol/hr and consists of 40 mole% benzene. The liquid output has
a flowrate of 100 kmol/hr. The two output streams are in
equilibrium and exit the reboiler at 130 oC. Determine the
temperature of the feed stream. Neglect the effect of pressure and
consider the...
Nitrogen is bubbled through a liquid mixture that contains initially equimolar amounts of benzene (B) and...
Nitrogen is bubbled through a liquid mixture that contains
initially equimolar amounts of benzene (B) and toluene (T). The
system pressure is 3atm and the temperature is 80 degrees Celsius.
The nitrogen flow rate is 10 standard liters per second. The gas
leaving the bubbler is saturated with B and T vapors.
(a) Estimate the initial rated (in mol/min) at which B and T
leave the bubbler.
(b) How will the mole fraction of B and T in the liquid...
Nitrogen is bubbled through a liquid mixture that contains initially equimolar amounts of benzene (B) and...
Nitrogen is bubbled through a liquid mixture that contains
initially equimolar amounts of benzene (B) and toluene (T). The
system pressure is 3 atm and the temperature is 80C. The nitrogen
flow rate is 10.0 standard liters per second. The gas leaving the
bubbler is saturated with B and T vapors.
a) Estimate the initial rates (in mol/min) at which B and T
leave the bubbler.
b) How will the mole fractions of B and T in the liquid change...
For a liquid mixture of benzene and toluene of equal composition by mass, perform the following:...
For a liquid mixture of benzene and toluene of equal composition
by mass, perform the following:
a) Using Raoult’s law , calculate the total pressure and mole
fractions of each substance in a gas phase containing only benzene
and toluene vapor in equilibrium with the given liquid mixture at
60oC.
b) Prove that the bubble point of the liquid mixture at
pressure, P = 0.715 atm is 80OC
c) Briefly describe what would happen if the mixture were heated
slowly,...
A liquid mixture of benzene-toluene is to be distilled in a fractionating tower at 101.3 kPa...
A liquid mixture of benzene-toluene is to be distilled in a
fractionating tower at 101.3 kPa pressure. The feed of 100 kg mol/h
is liquid, containing 45 mol benzene and 55 mol% toluene, and
enters at 327.6 K. A distillate containing 95 mol benzene and 5 mol
toluene and a bottoms containing 10 mol benzene and 90 mol toluene
are to be obtained. The reflux ratio R is 4: 1. Determine the kg
moles per hour distillate, kg moles per...
A gas containing nitrogen, benzene, and toluene is in equilibrium with a liquid mixture of 30.0...
A gas containing nitrogen, benzene, and toluene is in
equilibrium with a liquid mixture of 30.0 mole% benzene–70.0 mole%
toluene at 50.0°C and 15.0 atm. Estimate the gas-phase composition
(mole fractions using Raoult's law).
A liquid mixture of benzene and toluene is contained in a closed vessel at 60°C. The...
A liquid mixture of
benzene and toluene is contained in a closed vessel at 60°C. The
only other component in the system is nitrogen gas which is used to
pressurize the system to 1 atm total pressure (absolute). The
liquid is 70 mole% benzene and 30 mole% toluene, and the
N2 is considered non-condensable (i.e., the liquid mole
fraction of nitrogen is zero). Consider the mixture to be ideal,
and determine the vapor mole fractions of the three components.
(Document...
A liquid is a mixture of benzene (C6H6) and toluene (C7H8). The sample contains 20.309 grams...
A liquid is a mixture of benzene (C6H6) and toluene (C7H8). The
sample contains 20.309 grams of benzene and 114.254 grams of
toluene. At a given temperature, pure benzene has a vapor pressure
of 38.50 torr, while pure toluene has a vapor pressure of 8.99
torr. What is the total combined vapor pressure of the two liquids
(in torr)?
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- 3) You are rolling a 12 sided die 8 times. a) What is the size for...
- explain the difference between quantitative and qualitative research strategies. Provide an example of a crime based...
- use postorder and inorder tree traversals to make preorder traversal. #!/usr/bin/env python3 # encoding: UTF-8 """Turning...
- 1. Write an if-else statement to describe an object. Print "Balloon" if isBalloon is true and...
- An investor is considering purchasing a Treasury bond with a 20 year maturity, an 8% coupon...
- Write a program that copies the contents of one file to a destination file. This program...
- how to conduct a marketing mix for 3d crest white strips
ADVERTISEMENT