Question

In: Physics

1.) A 1.00m long, 5.00kg rod is held at one end. How much torque is generated...

1.) A 1.00m long, 5.00kg rod is held at one end. How much torque is generated by the bar? What happens to the torque if the mass remains consant but the length is doubled?

2.) A large light (2.00kg) is held away from a wall by a 50.0cm rod (massless) and a cable that attaches to the wall at a 45 degree angle. Find the forces provided by the wall and the cable on the rod.

Solutions

Expert Solution


Related Solutions

A torque is applied to a long thin rod making it rotate with an angular acceleration...
A torque is applied to a long thin rod making it rotate with an angular acceleration of 5.10 rad/s2 about an axis through its center and perpendicular to its length (see the Figure (a) below). If the same torque is now applied to make the rod rotate about an axis about one end perpendicular to its length (see Figure (b) below), determine the new angular acceleration of the rod. rad/s2
A transverse sinusoidal wave is generated at one end of a long, horizontal string by a...
A transverse sinusoidal wave is generated at one end of a long, horizontal string by a bar that moves up and down through a distance of 1.7 cm. The motion is continuous and is repeated regularly 160 times per second. The string has linear density 460 g/m and is kept under a tension of 140 N. Find the maximum value of (a) the transverse speed u and (b) the transverse component of the tension T. (c)Show that the two maximum...
One end of a uniform ℓ = 4.40-m-long rod of weight w issupported by a...
One end of a uniform ℓ = 4.40-m-long rod of weight w is supported by a cable at an angle ofθ = 37°with the rod. The other end rests against a wall, where it is held by friction (see figure). The coefficient of static friction between the wall and the rod isμs = 0.595.Determine the minimum distance x from point Aat which an additional weight w (the same as the weight of the rod) can be hung without causing the...
An aluminum rod, 1.0 m long, is held lightly in the middle. One end is struck head-on with a rubber mallet so that a longitudinal pulse —a sound wave—travels down the rod. The fundamental frequency of the longitudinal vibration is 2.55 kHz.
An aluminum rod, 1.0 m long, is held lightly in the middle. One end is struck head-on with a rubber mallet so that a longitudinal pulse —a sound wave—travels down the rod. The fundamental frequency of the longitudinal vibration is 2.55 kHz. (a) Describe the locations of the displacement and pressure nodes and antinodes for the fundamental mode of vibration. (b) Calculate the speed of sound in aluminum from the information given in the problem. (c) The vibration of the...
The left end of a long glass rod 8.60 cm in diameter, with an index of...
The left end of a long glass rod 8.60 cm in diameter, with an index of refraction 1.55, is ground and polished to a convex hemispherical surface with a radius of 4.30 cm . An object in the form of an arrow 1.53 mm tall, at right angles to the axis of the rod, is located on the axis 23.5 cm to the left of the vertex of the convex surface. Find the height of the image of the arrow...
A 50 cm long rod is half aluminum and half copper. The aluminum end is in...
A 50 cm long rod is half aluminum and half copper. The aluminum end is in boiling water. The end of an aluminum rod (50 cm long) is maintained at 100 C by immersing in a pot of boiling water and the other end at 00C by an ice-water mixture. If the cross-sectional area of the rod is 1.3 cm2, how much will the rod melt in 20 min? What will be the steady temperature at the Al-Cu junction?
You have a vertical metal rod, a spring with one end closed and the other end...
You have a vertical metal rod, a spring with one end closed and the other end open so that it can slide down over the rod and then fly up when released, and a meter stick. The mass of the spring is 15g and its spring constant k is 6 N/m Your group decides to test the work-energy principle by stretching the spring a distance Dy = 30 cm, releasing it from rest and measuring how high it goes. Use...
A rigid massless rod is rotated about one end in a horizontal circle. There is a...
A rigid massless rod is rotated about one end in a horizontal circle. There is a load of mass m attached to the center of the rod, and one of mass M attached to the outer end of the rod. The inner section of the rod sustains a tension that is three times as great as the tension that the outer section sustains. The mass ration of m/M is? Answer is 1 WHY?
A. How much torque needs to be produced to move 60 kg (R) when the RA...
A. How much torque needs to be produced to move 60 kg (R) when the RA is 0.30 m and the FA is 0.1 meters? b. What value could you change to decrease the torque needed to lift the SAME object. 12. a. What is the “contractile” unit of muscle called? ______________         b. what is the non-contractile element (series elastic element) in a muscle lever system? 13. in regards to “power” which is more powerful, muscle fibers arranged in...
How long does it take, approximately, when the interest generated by principal equals the interest generated...
How long does it take, approximately, when the interest generated by principal equals the interest generated by interest for a particular year (i.e., it refers to the interest generated by interest for a particular year, not the interest generated by interest that has cumulated so far), when the interest rate = 9%?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT