Question

In: Mechanical Engineering

(a) Calculate the settling velocity of glass spheres (density = 2467 kg/m3) having diameter as 1.5...

(a) Calculate the settling velocity of glass spheres (density = 2467 kg/m3) having diameter as 1.5 mm in water. The slurry contains 65% by weight solid. Use Newton’s law.

(b) Mixture of an ore (density 2000 kg/m3) and gangue (density 7000 kg/m3) is to be separated in a hydraulic elutriator. The mixture has following size distribution, which is valid for ore as well as gangue. Predict the upward velocity of water in elutriator so that entire ore is collected in the overflow. Also ensure that not gangue should be present in overflow. Use fD = 20/Re^0.5 .

Solutions

Expert Solution


Related Solutions

Determine the terminal settling velocity of a particle having a density of 2540 kg/m3 and a...
Determine the terminal settling velocity of a particle having a density of 2540 kg/m3 and a diameter of 10 mm in water having a temperature of 10C. You may assume that the particle is a perfect sphere (shape factor = 1). What would be the settling velocity for the same particle if the water temperature decreased to 5C?
Solid particles (diameter 1.5 x 10-4 m, average density = 2800 kg/m3) are settling in water...
Solid particles (diameter 1.5 x 10-4 m, average density = 2800 kg/m3) are settling in water at 30 °C. The properties of water at this temperature are viscosity (µ) = 8 x 10-4 kg/m.s and density (p) = 996 kg/m3 a) What is the terminal velocity for the particles? b) What would be the velocity of the system in a separator with an acceleration of 390 m/s2?
Compute the settling velocity for the following particles: very coarse sand ( diameter = 1.5 mm...
Compute the settling velocity for the following particles: very coarse sand ( diameter = 1.5 mm ) , (diameter=1.5 mm), medium sand (0.4 mm), very fine sand (0.075 mm), and clay (0.001 mm). Estimate the time for each particle to fall 6 in. in water. Assume: SG: coarse sand = 2.65, medium sand = 2.67, fine sand = 2.70, clay = 2.8 & water temperature = 60°F Note:The other solution on chegg is wrong.
A 1-mm diameter sphere (density=7900 kg/m3) is dropped into a tank of oil (density=900 kg/m3). The...
A 1-mm diameter sphere (density=7900 kg/m3) is dropped into a tank of oil (density=900 kg/m3). The sphere develops a terminal speed of 0.25 cm/s, what is the oil's viscosity? You may assume a small Reynolds number. Show your work.
Say the density of air is 1.23 kg/m3 and the density of helium is 0.164 kg/m3...
Say the density of air is 1.23 kg/m3 and the density of helium is 0.164 kg/m3 when both are at STP. Let's model a balloon as a sphere of radius 0.12 m, with mass 2 g. 1) What is the mass of the helium that would fill a single balloon? 2) What is the buoyant force on a single balloon? 3) What is the net force on a single balloon? 4) If we attach 0.5 m of string (properties: 800...
Approximately spherical particles of diameter 150? and density 2650 kg/m3 settle through a liquid of density...
Approximately spherical particles of diameter 150? and density 2650 kg/m3 settle through a liquid of density 1097 kg/m3 and dynamic viscosity 3.8 mPa s. The volume fraction of particles is 30% in a container of internal diameter 2 cm Calculate: a)The absolute settling velocity that is apparent to the stationary observer in the lab frame. b)The slip velocity (Us) between solid and liquid phases. c) The superficial velocity of the particles in the lab frame.
A raft is constructed of wood having a density of 6.00x102 kg/m3. Its surface area is...
A raft is constructed of wood having a density of 6.00x102 kg/m3. Its surface area is 5.50 m2 and its volume is 0.55 m3. When the raft is placed in fresh water, to what depth h is the raft submerged by its weight? The density of fresh water is 1000 kg/m3. Hint: Use Newton’s second to sum the forces (Buoyancy and weight) that are in equilibrium.
A liquid of density 1.33 × 103 kg/m3 flows steadily through a pipe of varying diameter...
A liquid of density 1.33 × 103 kg/m3 flows steadily through a pipe of varying diameter and height. At location 1 along the pipe the flow speed is 9.09 m/s and the pipe diameter is 10.9 cm. At location 2 the pipe diameter is 14.3 cm. At location 1 the pipe is 9.75 m higher than it is at location 2. Ignoring viscosity, calculate the difference between the fluid pressure at location 2 and the fluid pressure at location 1.
Apply the discrete particle settling theory to calculate the terminal settling velocity of a sand particle...
Apply the discrete particle settling theory to calculate the terminal settling velocity of a sand particle in the water at 25°C having a particle diameter of 300 µm and a density of 2,450 kg/m3. Show the calculations and logic for at least two of your iterations. please clear steps
A spherical mylar balloon filled with Hydrogen gas, with density 0.0899 kg/m3 and having radius 7...
A spherical mylar balloon filled with Hydrogen gas, with density 0.0899 kg/m3 and having radius 7 meters is immersed in a gas having density X1=1.205 for the first 10 km and X2=2.489 for the second 10 km (with the upper atmosphere density smaller than the lower atmosphere density). Determine how long it takes the balloon to reach the top of the second layer. To do this, you will have to: a) find the net force on the balloon (assume the...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT