A vertically polarized laser beam (wavelength 400 nm) passes through a polarizer (60° from vertical) and two slits that are 0.1 mm apart.

A vertically polarized laser beam (wavelength 400 nm) passes through a polarizer (60° from vertical) and two slits that are 0.1 mm apart. Each slit is 800 nm wide. The light hits a screen 1 m away.
a. What is the frequency of the laser light?
b. What fraction of light intensity is transmitted through the polarizer?
c. At what angle does the second-order maximum occur?
d. One slit is blocked. What is the width of the central maximum on the screen?

Expert Solution

genius_generous answered 2 years ago

If 735-nm and 620-nm light passes through two slits 0.78 mm apart, how far apart are...

If 735-nm and 620-nm light passes through two slits 0.78 mm apart, how far apart are the second-order fringes for these two wavelengths on a screen 1.0 m away? Express your answer to two significant figures and include the appropriate units. Δx =

1. Coherent light of wavelength 525 nm passes through two thin slits that are 0.0415 mm...

1. Coherent light of wavelength 525 nm passes through two thin slits that are 0.0415 mm apart and falls on a screen 75.0 cm away. How far away from the central bright fringe on the screen is a.) the fifth bright fringe (not counting the central bright fringe) b.) the eighth dark fringe 2. Red light of wavelength 633 nm from a helium-neon laser passes through a slit 0.350 mm wide. The diffraction pattern is observed on a screen 3.00...

A 180 mW vertically polarized laser beam passes through a polarizing filter whose axis is 36...

A 180 mW vertically polarized laser beam passes through a polarizing filter whose axis is 36 ∘ from horizontal. What is the power of the laser beam as it emerges from the filter?

Light of wavelength 600 nm passes though two slits separated by 0.25 mm and is observed...

Light of wavelength 600 nm passes though two slits separated by 0.25 mm and is observed on a screen 1.3 m behind the slits. The location of the central maximum is marked on the screen and labeled y = 0. A .At what distance, on either side of y = 0, are the m = 1 bright fringes? B.A very thin piece of glass is then placed in one slit. Because light travels slower in glass than in air, the...

Vertically polarized light passes through two polarizers, the first at 66° to the vertical space and...

Vertically polarized light passes through two polarizers, the first at 66° to the vertical space and the second at 85° to the vertical. What fraction of the light gets through? %

Laser light from argon ion laser of wavelength 488.0 nm passes through a diffraction grating. The...

Laser light from argon ion laser of wavelength 488.0 nm passes through a diffraction grating. The first bright spots occur at an angle 6.726 degree left and right from the central maximum. How many additional pares of bright spots are there beyond the first bright spots?

a vertically polarized light is sent through two polarizers. the first polarizer makes an angle of...

a vertically polarized light is sent through two polarizers. the first polarizer makes an angle of 30 clockwise with the original direction of polarization of the light. the second polarizer makes an angle of 20 degrees counterclockwise from the vertical. what fraction of the original polarized intensity gets through the second polarizer? a. 0.66 b. 0.44 c. 0.21 d. 0.31 e. 0.56

Light from a red laser (650 nm) is incident on two slits separated by 0.5 mm....

Light from a red laser (650 nm) is incident on two slits separated by 0.5 mm. Each slit is 0.25 mm wide. Quantitatively sketch the pattern you would observe on a screen that is located 2.0 m from the slits. Your sketch should range from -10 mm to 10 mm and include only the fringes you would observe. (Label the locations of the fringes) PLEASE EXPLAIN THOROUGHLY!!!!

A beam of wavelength 310 nm from a laser is incident on a metal with work...

A beam of wavelength 310 nm from a laser is incident on a metal with work function 2.7 eV. The power of the laser is 0.15 W. (a) Does the metal emit photoelectrons? Why? (b) What is the range of photoelectron kinetic energies emitted by metal? (c) What is the range of de Broglie wavelengths of these photoelectons? (d) How does result for part (b) change if the laser power is doubled to 0.30 W? Thank you.

A 225 mW horizontally polarized laser beam passes through a polarizing filter whose axis is 23°...

A 225 mW horizontally polarized laser beam passes through a polarizing filter whose axis is 23° from vertical. What is the power of the laser beam as it emerges from the filter? answer units must be in mW

Question