Question

In: Other

Methane reacts with chlorine to produce methyl chloride and hydrogen chloride. CH4 + Cl2 → CH3Cl...

Methane reacts with chlorine to produce methyl chloride and hydrogen chloride. CH4 + Cl2 → CH3Cl + HCl Once formed, methyl chloride can be chlorinated in subsequent reactions to form methylene chloride (CH2Cl2), chloroform (CHCl3) and carbon tetrachloride (CCl4). In a methyl chloride production process a reactor is fed with methane and chlorine in a molar ratio of 5: 1 (methane: chlorine). In the process the chlorine is consumed in its entirety. The selectivity observed in the process is 4 mol of CH3Cl / mol of CH2Cl2 and negligible amounts of chloroform and carbon tetrachloride. The product stream of reactor passes to a condenser where CH3Cl and CH2Cl2 are separated in liquid form, and CH4 it is separated from the HCl to be recirculated to the process (only CH4 is recirculated). The production of CH3Cl is 500 kmol / h. Calculate the flow and molar composition of the fresh feed, the HCl flow that occurs and the flow of methane recirculation.

Solutions

Expert Solution


Related Solutions

Methane reacts with chlorine to produce methyl chloride and hydrogen chloride. Once formed, the methyl chloride...
Methane reacts with chlorine to produce methyl chloride and hydrogen chloride. Once formed, the methyl chloride may undergo further chlorination to form methylene chloride, chloroform, and carbon tetrachloride. A methyl chloride production process consists of a reactor, a condenser, a distillation column, and an absorption column. A gas stream containing 80 mole% methane and the balance chlorine is fed to the reactor. In the reactor, a single-pass chlorine conversion of essentially 100% is attained, the mole ratio of methyl chloride...
The chlorination of methane occurs by the following reaction: CH4 + Cl2 → CH3Cl + HCl...
The chlorination of methane occurs by the following reaction: CH4 + Cl2 → CH3Cl + HCl The conversion of the limiting reactant is 67%, and the feed composition in mole percent is 40% CH4, 50% Cl2, and 10% N2. (a) Determine which reactant is the limiting reactant, and calculate the percentage by which the other reactant is in excess. (b) Draw a fully labeled process flowchart, and perform a DOF analysis using all 3 methods (molecular species method, atomic species...
The first-order rate constant for the reaction of methyl chloride (CH3Cl) with water to produce methanol...
The first-order rate constant for the reaction of methyl chloride (CH3Cl) with water to produce methanol (CH3OH) and hydrochloric acid (HCl) is 3.32 × 10−10 s−1 at 25°C. Calculate the rate constant at 50.3°C if the activation energy is 116 kJ/mol.
The chemical equation for the reaction between methane and elemental chlorine is: CH4(g) + 2 Cl2(g)...
The chemical equation for the reaction between methane and elemental chlorine is: CH4(g) + 2 Cl2(g) → CCl4(g) + 4 HCl(g) Use the provided values for enthalpies of formation and entropies of the reactants and the products to calculate the standard enthalpy, the entropy and the free Gibbs energy changes associated with the reaction (ΔrHo, ΔrSo, ΔrGo) and tell which one of the statements below describes the reaction correctly Substance ΔrHo(kJ/mol) So(J/molK) CH4(g) -74.9 186.2 Cl2(g) 0 223.0 CCl4(g) -95.98...
1 Hydrogen and chlorine react to produce hydrogen chloride (HCl) as shown below. At equilibrium, the...
1 Hydrogen and chlorine react to produce hydrogen chloride (HCl) as shown below. At equilibrium, the flask contains 0.239 g of HCl, 0.254 g of Cl2 and 0.00013 g of H2. Calculate the value of Kc. The reaction is: H2 + Cl2 <--> 2HCl Hint: Work in mol/L. 1.72 x 103 5.4 x 10-2 1.84 x 102 3.55  x 10-5 2.99 x 104 2.If 40 g of HF are initially placed in an empty 1 L flask, calculate the amount of...
When methane (CH4) burns, it reacts with oxygen gas to produce carbon dioxide and water. The...
When methane (CH4) burns, it reacts with oxygen gas to produce carbon dioxide and water. The unbalanced equation for this reaction is CH4(g)+O2(g) → CO2(g)+H2O(g) This type of reaction is referred to as a complete combustion reaction. B. What mass of carbon dioxide is produced from the complete combustion of 5.00×10−3 (g) of methane? w/ units. C. What mass of water is produced from the complete combustion of 5.00×10−3 g of methane? w/ units. D. What mass of oxygen is...
When methane (CH4) burns, it reacts with oxygen gas to produce carbon dioxide and water. The...
When methane (CH4) burns, it reacts with oxygen gas to produce carbon dioxide and water. The unbalanced equation for this reaction is CH4(g)+O2(g)→CO2(g)+H2O(g) This type of reaction is referred to as a complete combustion reaction. Part B-What mass of carbon dioxide is produced from the complete combustion of 3.00×10−3 g of methane? Part C-What mass of water is produced from the complete combustion of 3.00×10−3 g of methane? Part D- What mass of oxygen is needed for the complete combustion...
. Consider this reaction: zinc metal reacts with hydrochloric acid to produce hydrogen and zinc chloride....
. Consider this reaction: zinc metal reacts with hydrochloric acid to produce hydrogen and zinc chloride. Zn + 2 HCl → ZnCl2 + H2 (a) If 0.30 mol of Zn is added to hydrochloric acid containing 0.52 mol of HCl, how many moles of H2 are produced? (or what is the theoretical yield of H2 produced in the reaction?) (b) In the above procedure, if the actual yield of the reaction is 0.26 mol of H2. What is the percent...
Chlorine gas reacts with fluorine gas to form chlorine trifluoride. Cl2 (g) + 3 F2 (g)...
Chlorine gas reacts with fluorine gas to form chlorine trifluoride. Cl2 (g) + 3 F2 (g) → 2 ClF3 (g) A 1.65 L reaction vessel, initially at 298 K, contains chlorine gas at a partial pressure of 337 mmHg and fluorine gas at a partial pressure of 741 mmHg . What is the pressure of ClF3 in the reaction vessel after the reaction? Enter your answer numerically, in terms of mmHg.
For the reaction CH4(g) + Cl2(g) ⇌ CH3Cl(g) + HCl(g) + 26.4 kcal predict the effect...
For the reaction CH4(g) + Cl2(g) ⇌ CH3Cl(g) + HCl(g) + 26.4 kcal predict the effect on the equilibrium (will it shift to the left or right, or will there be no change?) for each of the following changes. Be sure to answer all parts: (a) The temperature is increased. (select one of the following: 1) equilibrium shifts to the left, 2) equilibrium shifts to the right, or 3) equilibrium does not change (b) The pressure is increased by decreasing...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT