Question
In: Mechanical Engineering
why SMC-R50 will be used instead of fabric-reinforced composite for decklids.
why
SMC-R50 will be used instead of fabric-reinforced composite for
decklids.
Solutions
samet mamat answered 2 years agoRelated Solutions
What is the difference between SMC-R50 composite and fabric reinforced composites? I know SMC uses random...
What is the difference between SMC-R50 composite and fabric
reinforced composites?
I know SMC uses random fiber orientation, is there a random
fiber fabric?
Thanks
Write the lay-up in proper composite lay-up notation. 45 Fabric (fiberglass); 0 (Carbon fabric); 0 Tape...
Write the lay-up in proper composite lay-up notation. 45 Fabric
(fiberglass); 0 (Carbon fabric); 0 Tape (Carbon); 0 Tape (Carbon);
90 Tape (Carbon); +45 Tape (Carbon); -45 Tape (Carbon); +45 Fabric
(Carbon); -45 Fabric (Carbon); -45 Tape (Carbon); +45 Tape
(Carbon); 0 Tape (Carbon); 0 Tape (Carbon); 0 (Carbon fabric); 45
Fabric (fiberglass);
A continuous and aligned fiber-reinforced composite is to be produced consisting of 30 vol.% aramid fibers...
A continuous and aligned fiber-reinforced composite is to be
produced consisting of 30 vol.% aramid fibers and 70 vol.% of a
polycarbonate matrix. The elastic modulus values of aramid fibers
and polycarbonate matrix are 131 GPa and 2.4 GPa, respectively.
Assume that the composite has a cross-sectional area of 320 mm2 and
is subjected to a longitudinal load of 44.500 N.
What is the elastic modulus of the composite in the
longitudinal direction?
What is the fiber/matrix load ratio?
What...
A new set of fiber-reinforced composite is designed to support the body function. Compute the longitudinal...
A new set of fiber-reinforced composite is designed to support
the body function. Compute the longitudinal tensile strength of
this fiber–epoxy matrix biocomposite in which the average fiber
diameter and length are 0.018 mm and 2.2 mm, respectively, and the
volume fraction of fibers is 0.35. Assume that the fiber–matrix
bond strength is 122 MPa, the fracture strength of the fibers is
3800 MPa, and the matrix stress at composite failure is 5.9
MPa.
5. Fabric is used to make dresses. If the price of fabric increases what is likely...
5. Fabric is used to make dresses. If the price of fabric
increases what is likely to happen to the equilibrium price and
quantity for dresses. If price stays the same would that be
equilibrium? Why or why not? What will eventually happen in the
market? What happens to equilibrium price and quantity? Which
quantity is affected and how do you know? Illustrate using a
graph.
6. Suppose that people expect that the price of computers will
fall next month....
Explain methods used in financing its business and why it is used instead of others?
Explain methods used
in financing its business and why it is used instead of others?
1_List the circumstances in which a singly reinforced and doubly reinforced beam sections are used in...
1_List the circumstances in which a singly reinforced
and doubly reinforced beam sections are used in a structure.
2_State Necessity of Reinforcement in R.C.C Structures.
A continuous and aligned fiber-reinforced composite having a cross-sectional area of 1190 mm2 is subjected to...
A continuous and aligned fiber-reinforced composite having a
cross-sectional area of 1190 mm2 is subjected to an external
tensile load. If the stresses sustained by the fiber and matrix
phases are 144 and 2.16 MPa, respectively, the force sustained by
the fiber phase is 74400 N, and the total longitudinal strain is
0.00119, determine the following: (a) The force sustained by the
matrix phase (in N). (b) The modulus of elasticity of the composite
material in the longitudinal direction (in...
A continuous and aligned fibrous reinforced composite having a cross-sectional area of 875 mm2 is subjected...
A continuous and aligned fibrous reinforced composite having a
cross-sectional area of 875
mm2 is subjected to an external tensile load. If the
stresses sustained by the fiber and matrix
phases are 255 MPa and 8.35 MPa, respectively, the force sustained
by the fiber phase is 85,800
N, and the total longitudinal composite strain is 1.65 x
10-3, determine the following:
(20 Points)
(a) Volume fraction of fiber and matrix
(b) The force sustained by the matrix phase
(c) The...
A continuous and aligned fibrous reinforced composite having a cross-sectional area of 875 mm2 is subjected...
A continuous and aligned fibrous reinforced composite having a
cross-sectional area of 875
mm2 is subjected to an external tensile load. If the
stresses sustained by the fiber and matrix
phases are 255 MPa and 8.35 MPa, respectively, the force sustained
by the fiber phase is 85,800
N, and the total longitudinal composite strain is 1.65 x
10-3, determine the following:
(a) Volume fraction of fiber and matrix
(b) The force sustained by the matrix phase
(c) The modulus of...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- What is "intersectionality", and why is this a relevant concept in anthropology? Use examples in your...
- What are the differences between the economic theories and the reality of policy implementation?
- Designing A New Arena : You work for a company that has been tasked with designing...
- HOW DO YOU THINK HUMANS CAME TO HAVE LANGUAGE? WHAT IS THE DIFFERENCE BETWEEN HUMAN LANGUAGE...
- Gasoline is primarily a mixture of hydrocarbons and is sold with an octane rating that is...
- a) The electric potential at a position located a distance of 21.9 mm from a positive...
- Salivary amylase is a digestive enzyme which begins the digestion of ____ Proteins Starch Lipids Glucose...
ADVERTISEMENT