Question
In: Civil Engineering
A continuous and aligned fibrous reinforced composite having a cross-sectional area of 875 mm2 is subjected...
A continuous and aligned fibrous reinforced composite having a
cross-sectional area of 875
mm2 is subjected to an external tensile load. If the
stresses sustained by the fiber and matrix
phases are 255 MPa and 8.35 MPa, respectively, the force sustained
by the fiber phase is 85,800
N, and the total longitudinal composite strain is 1.65 x
10-3, determine the following:
(20 Points)
(a) Volume fraction of fiber and matrix
(b) The force sustained by the matrix phase
(c) The modulus of elasticity of the composite material in the
longitudinal direction
(d) The moduli of elasticity for fiber and matrix phases
Solutions
Ally Wells answered 11 months agoRelated Solutions
A continuous and aligned fibrous reinforced composite having a cross-sectional area of 875 mm2 is subjected...
A continuous and aligned fibrous reinforced composite having a
cross-sectional area of 875
mm2 is subjected to an external tensile load. If the
stresses sustained by the fiber and matrix
phases are 255 MPa and 8.35 MPa, respectively, the force sustained
by the fiber phase is 85,800
N, and the total longitudinal composite strain is 1.65 x
10-3, determine the following:
(a) Volume fraction of fiber and matrix
(b) The force sustained by the matrix phase
(c) The modulus of...
A continuous and aligned fiber-reinforced composite having a cross-sectional area of 1190 mm2 is subjected to...
A continuous and aligned fiber-reinforced composite having a
cross-sectional area of 1190 mm2 is subjected to an external
tensile load. If the stresses sustained by the fiber and matrix
phases are 144 and 2.16 MPa, respectively, the force sustained by
the fiber phase is 74400 N, and the total longitudinal strain is
0.00119, determine the following: (a) The force sustained by the
matrix phase (in N). (b) The modulus of elasticity of the composite
material in the longitudinal direction (in...
Question 1 A copper tube having a cross-sectional area of 2000 mm2 and length of 300...
Question 1
A copper tube having a cross-sectional area of 2000
mm2 and length of 300 mm is placed between two rigid
caps. Four 22 mm diameter steel bolts are symmetrically arranged
parallel to the axis of the tube and are lightly fastened.
Calculate:
The stress in the tube if the temperature of the assembly is
raised by 700C.
The load each bolt will carry at the raised
temperature.
EST = 200 GPa; αST = 12 x
10-6...
There are 2 types of Fiber-reinforced composite material. Continuous (aligned) and discontinuous(random or aligned) If we...
There are 2 types of Fiber-reinforced composite
material. Continuous (aligned) and discontinuous(random or
aligned)
If we have aligned composite, how can we know it is discontinuous?
And what is difference with random discontinuous?
A continuous and aligned fiber-reinforced composite is to be produced consisting of 30 vol.% aramid fibers...
A continuous and aligned fiber-reinforced composite is to be
produced consisting of 30 vol.% aramid fibers and 70 vol.% of a
polycarbonate matrix. The elastic modulus values of aramid fibers
and polycarbonate matrix are 131 GPa and 2.4 GPa, respectively.
Assume that the composite has a cross-sectional area of 320 mm2 and
is subjected to a longitudinal load of 44.500 N.
What is the elastic modulus of the composite in the
longitudinal direction?
What is the fiber/matrix load ratio?
What...
A silver wire has a cross sectional area A = 2.0 mm2. A total of 9.4...
A silver wire has a cross sectional area A = 2.0 mm2. A total of
9.4 × 1018 electrons pass through the wire in 3.0 s. The conduction
electron density in silver is 5.8 × 1028 electrons/m3 and e = 1.60
× 10-19 C. What is the drift velocity of these electrons?
A long, straight, copper wire with a circular cross-sectional area of 2.1 mm2 carries a current...
A long, straight, copper wire with a circular cross-sectional
area of
2.1 mm2
carries a current of 22 A. The resistivity of the material is 2.00
10-8?
Two cables, both with conductor cross-sectional area 6 mm2, are connected in parallel across a common...
Two cables, both with conductor cross-sectional area 6
mm2, are connected in parallel across a common D.C. voltage of 21
Volts.
The resistivity of Cable 1 is ρ = 2.0 x 10-9 Ω.m at 20
°C, while the resistivity of Cable 2 is ρ = 3.0 x 10-9 Ω.m at 20
°C.
Cable 1 is 1348 mm in length.
If 43.2 % of the current passes through cable 1,
determine the length of cable 2.
Assume the ambient temperature is...
Find the required rectangular cross-sectional area for a tied reinforced concrete column which should support a...
Find the required rectangular cross-sectional area for a tied
reinforced concrete column which should support a load of 300 tons.
Use 4000 psi concrete, ultimate steel stress of 60,000 psi and 4%
steel.
Copper, brass and steel rods are welded to form a ?. The cross sectional area of...
Copper, brass and steel rods are welded to form a ?. The cross
sectional area of each rod is 2.00 ??2. The free end of
the copper rod is held at 100.0 ° ?; and the free ends of the brass
and steel rods, at 0.0 ° ?. Suppose there is no heat loss from the
sides of the rods, the lengths of which are: copper, 13.0 ??;
brass, 18.0 ??; steel, 24.0 ??. a) What is the temperature of...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- Why do we design airports for some capacity less than the highest capacity we can ever...
- Write a function log2(x), which gives an integer approximation of the log base 2 of a...
- A 0.025 M solution of hydroxylamine has a pH of 9.11. What is the value of...
- Madison Manufacturing is considering a new machine that costs $350,000 and would reduce pre-tax manufacturing costs...
- Describe the history of SNMP from its beginning and compare/contrast the features of the different versions....
- Please Show Work An express subway train passes through an underground station. It enters with an...
- I need to find the kth smallest element in the union of 2 sorted arrays in...
ADVERTISEMENT