Design a four-link mechanism when the motions of the input and the output links are governed...

Design a four-link mechanism when the motions of the input and the output links are governed by a function y = x2 and x varies from 0 to 2 with an interval of 1.

Assume to vary from 50° to 150° and from 80° to 160°.

Expert Solution

the graph drawn here is not up to the scale and the problem comes under computer aided design which u can solve manullay by simulation softwares

samet mamat answered 2 years ago

ABCD is a four bar chain with link AD fixed. The lengths of the links are...

ABCD is a four bar chain with link AD fixed. The lengths of the links are AB = 62.5 mm; BC = 175 mm; CD = 112.5 mm; and AD = 200 mm. The crank AB rotates at 48 rad/s clockwise. Draw the velocity and acceleration diagram when angle BAD = 60° and B and C lie on the same side of AD. Find the angular velocity and angular acceleration of links BC and CD.

Design a combinational circuit with four inputs (A, B, C and D) and four outputs (W, X, Y and Z). When the binary input is less than 10 the binary output is two greater than the input. When the binary input is equal or greater than 10 the binary output

Design a combinational circuit with four inputs (A, B, C and D) and four outputs (W, X, Y and Z). When the binary input is less than ten the binary output is two greater than the input. When the binary input is equal or greater than ten the binary output is three less than the input.

1. Using Moore machine approach design a sequence detector with one input and one output. When...

1. Using Moore machine approach design a sequence detector with one input and one output. When input sequence 010 occurs the output becomes 1 and remains 1 until the sequence 010 occurs again in which case the output returns to 0. The output remains 0 until, 010 occurs the third time, and so on. Your design should be able to handle overlapping sequences, i.e., input sequence 11001010100 should produce the output 00000110011. Implement your detector using D flip-flops and the...

Using PHP, design a function that given a Roman numeral (Wikipedia link.), in input, is able...

Using PHP, design a function that given a Roman numeral (Wikipedia link.), in input, is able to compute the modern Hindu–Arabic numeral (wikipedia link), system representation (aka, 0123456789). For example: Input Output VI 6 IV 4 MCMXC 1990 IX 9 Be sure to add all the necessary checks and at least one testing function. Try to split the logic in more small functions.

Design the specification for the temperature HMI and specify the input / output range allowed by...

Design the specification for the temperature HMI and specify the input / output range allowed by the given simulator. Write the ladder logic program to capture the BCD degree F entered form input I: 0 and display the output O: 2 in degrees centigrade using the BCD format. Flash output O: 2 for negative degree C and maintain it for positive values? Modify the program design to allow for input in hexadecimal, which accommodate degree F from 0 to 255.Display...

1. Describe the link between understanding enzyme mechanism and drug design and development. 2. How does...

1. Describe the link between understanding enzyme mechanism and drug design and development. 2. How does regulation of 1 enzyme in a metabolic pathway modulate the flux through the entire pathway?

Design a Moore state machine that has an input w and an output z that should...

Design a Moore state machine that has an input w and an output z that should output a ‘1’ when the previous 4 values of w were 1001 or 1111. Overlapping patterns are allowed. Show the state diagram and state table. Use a simple binary counting order for the state assignment. Derive all of the next-state and output equations. You do not need to draw the resulting circuit, instead write a Verilog module for it.

Design a detector for the input sequence X = 01011. The output Y must be 1...

Design a detector for the input sequence X = 01011. The output Y must be 1 when the sequence is detected, 0 in any other case. Draw the status diagram and generate a status table. Using the status table, design a logic circuit that generates the output function using T-type flip-flops. Please help me! Thanks!!!!

Q2. (i) Design a 2-input 1-output multiplexer, inside a hierarchical block. Explain your design. Name your...

Q2. (i) Design a 2-input 1-output multiplexer, inside a hierarchical block. Explain your design. Name your block with your student number: eg “123456 multiplexer”. (ii) Test your circuit in block form, showing the truth table from Multisim.

The input-output matrix for a simplified economy with just four sectors (natural resources, manufacturing, trade and...

The input-output matrix for a simplified economy with just four sectors (natural resources, manufacturing, trade and services, and personal consumption) is given below. Suppose the demand (in millions of dollars) matrix is matrix D given below. Find the amount each sector should produce. Natural nbsp Resources nbsp Resources nbsp Manufacturing nbsp Manufacturing nbsp Trade and nbsp Trade and Services Personal nbsp Consumption nbsp Consumption Upper D equals Start 4 By 1 Table 1st Row 1st Column 451 2nd Row 1st...

Question