Design a detector for the input sequence X = 01011. The output Y must be 1...

Design a detector for the input sequence X = 01011. The output Y must be 1 when the sequence is detected, 0 in any other case. Draw the status diagram and generate a status table. Using the status table, design a logic circuit that generates the output function using T-type flip-flops.

Please help me! Thanks!!!!

Solutions

Expert Solution

Manojponduru answered 1 year ago

Next > < Previous

Related Solutions

design a sequence detector that detects the sequence: 110. The device has one input x and...

design a sequence detector that detects the sequence: 110. The device has one input x and one output Y. When the input sequence is set to 1 followed by a 1 followed by a 0, then Y is set to 1 otherwise Y is set to 0. Use J-K flip-flops and minimum number of states is designing this detector and show the followings: a) Show the state diagram b)Show the state table for this detector

1. Using Moore machine approach design a sequence detector with one input and one output. When...

1. Using Moore machine approach design a sequence detector with one input and one output. When input sequence 010 occurs the output becomes 1 and remains 1 until the sequence 010 occurs again in which case the output returns to 0. The output remains 0 until, 010 occurs the third time, and so on. Your design should be able to handle overlapping sequences, i.e., input sequence 11001010100 should produce the output 00000110011. Implement your detector using D flip-flops and the...

Design a Mealy state diagram for a sequence detector that has a single input and a...

Design a Mealy state diagram for a sequence detector that has a single input and a single output. The output is to be “1” unless the input has been “0” for four consecutive clock pulses or “1” for three consecutive pulses. Implement your design using D flip-flops and any logic gates. Assume non-overlapping input sequences are to be detected.

1. Design a sequence detector, a Mealy finite state machine to detect the serial bit sequence...

1. Design a sequence detector, a Mealy finite state machine to detect the serial bit sequence 1101, where the most significant bit (MSB) comes first and the least significant bit comes last. A) Draw the state diagram B) Draw the state table C) The circuit is to be implemented using JK flip-flops and combinational logic circuit. Derive the Boolean expression necessary for this implementation. D) Sketch the circuit diagram for your design. This should show all the flipflops, logic gates...

x[n] is the input of a system and y[n] is the output of the system. The...

x[n] is the input of a system and y[n] is the output of the system. The relationship between the input and output is the following: y[n] = x[n]u[n+1] a) Is the system memoryless? Just yes or no is sufficient. b) Is this system causal? Just yes or no is sufficient. c) Is the system linear? Just yes or no is sufficient. d) Is the system time invariant? Justify. e) Is the system BIBO stable? Justify. f) Is the system invertible?...

A sequence detector is monitoring a serial input stream looking for either 0101 or 0110. The...

A sequence detector is monitoring a serial input stream looking for either 0101 or 0110. The output is two consecutive cycles of 1’s, with the first of the two being asserted in the same cycle as the last input matching the sequence; in other words, it has to be a Mealy machine. Draw the state diagram for this sequence detector Assign states and create the state table, showing next states and output as a function of current state and input....

for this set of assignment, Moore state machine Design a sequence detector to detect "001", where...

for this set of assignment, Moore state machine Design a sequence detector to detect "001", where 0 arrives first, then 0, then 1. You need to show the test sequences you used to confirm that your state diagram is operating correctly. When the complete "001" sequence has been detected, the output goes high. Otherwise, the output stays at zero. Shows your state diagram, state table, encoded state table (use minimized bit encoding), logic equations, and logic circuit. (30 points) 3....

An FIR system produced an output y[n] as given below for an input x[n] = {1,1,1,1},...

An FIR system produced an output y[n] as given below for an input x[n] = {1,1,1,1}, y[n] = {6,11,15,18,14,10,6,3,1}. Find the FIR system. Use bk, d(n-k) equation if applicable. Thanks!

X1(t) and x2(t) are two input sources. Design an OPAMP circuit which satisfies the output y(t):...

X1(t) and x2(t) are two input sources. Design an OPAMP circuit which satisfies the output y(t): y(t)= 2x1(t) - 3x2(t) +2V

Design a combinational circuit with four inputs (A, B, C and D) and four outputs (W, X, Y and Z). When the binary input is less than 10 the binary output is two greater than the input. When the binary input is equal or greater than 10 the binary output

Design a combinational circuit with four inputs (A, B, C and D) and four outputs (W, X, Y and Z). When the binary input is less than ten the binary output is two greater than the input. When the binary input is equal or greater than ten the binary output is three less than the input.

Subjects