Question

In: Mechanical Engineering

A CI engine operating on the air standard diesel cycle has cylinder condtioons at the start...

A CI engine operating on the air standard diesel cycle has cylinder condtioons at the start of compression of 65 degrees C and 130 kPa. light diesel fuel is used at an equivalence ratio of 0.8 with a combustion efficiency of 0.98. compression ratio = 18 Calculate:

  1. temperature and pressure in each state of the cycle (0c)
  2. pressure at each state of the cycle (kpa)
  3. cutoff ratio
  4. indicated thermal efficiency (%)
  5. heat lost in exhaust (KJ/Kg)

Solutions

Expert Solution

samet mamat answered 1 year ago
Next > < Previous

Related Solutions

A Diesel cycle engine is analyzed using the air standard method. Given the conditions at state...
A Diesel cycle engine is analyzed using the air standard method. Given the conditions at state 1, compression ratio (r), and cutoff ratio (rc) determine the efficiency and other values listed below. Note: The gas constant for air is R=0.287 kJ/kg-K. Given Values T1 (K) = 338 P1 (kPa) = 130 r = 14.5 rc = 1.25 a) Determine the specific internal energy (kJ/kg) at state 1. b) Determine the relative specific volume at state 1. c) Determine the relative...
The state at the beginning of compression of an air-standard Diesel cycle is fixed by p1...
The state at the beginning of compression of an air-standard Diesel cycle is fixed by p1 = 100 kPa and T1 = 310 K. The compression ratio is 18 and the cutoff ratio is 1.5. Determine: (a) the maximum temperature, in K. (b) the pressure at the end of the expansion, in kPa. (c) the net work per unit mass of air, in kJ/kg. (d) the percent thermal efficiency.
The state at the beginning of compression of an air-standard Diesel cycle is fixed by p1...
The state at the beginning of compression of an air-standard Diesel cycle is fixed by p1 = 100 kPa and T1 = 310 K. The compression ratio is 18 and the cutoff ratio is 1.5. Determine: (a) the maximum temperature, in K. (b) the pressure at the end of the expansion, in kPa. (c) the net work per unit mass of air, in kJ/kg. (d) the percent thermal efficiency
An Otto Cycle engine operation at cold-air standard has a volume of 0.1908 at the beginning...
An Otto Cycle engine operation at cold-air standard has a volume of 0.1908 at the beginning of isentropic compression. If the compression ratio is 12.5, how much heat is released from the fuel per kg of fuel burned if the fuel consumption is 0.02 kg/min? The mean effective pressure is 350kPa.
The 12 cylinder 2 stroke cycle compression ignition engine of an oil tanker is operating at...
The 12 cylinder 2 stroke cycle compression ignition engine of an oil tanker is operating at 150 rpm The brake mean effective pressure of the engine is 400 kPa and the excess air coefficient is 2. The crankshaft of the engine is directly coupled to a propeller and a torque of 1500 kN-m is applied. The engine operates on light fuel oil which can be approximated as C12H26. If the brake specific fuel consumption is 200 g/hp-h what is the...
An ideal diesel engine has a compression ratio of 20 and uses air as the working...
An ideal diesel engine has a compression ratio of 20 and uses air as the working fluid. The state of air at the beginning of the compression process is 95 kPa and 200C. If the maximum temperature in the cycle is not to exceed 2200 K, Determine: a) The thermal efficiency, and b) The mean effective pressure, and Assume constant specific heats for air at room temperature.
An ideal diesel engine has a compression ratio of 20 and uses air as the working...
An ideal diesel engine has a compression ratio of 20 and uses air as the working fluid. The state of air at the beginning of the compressor process is 100 kpa and 27 C. The maximum temperature in the cycle is 2200 K and the cutoff ratio is 1.2 Determine the following: The internal energies at the beginning and the end of the compression The enthalpy before and end of the combustion The internal energy before and end of the...
3 Question 3: In an air standard Diesel cycle with compression ratio 14, the conditions of...
3 Question 3: In an air standard Diesel cycle with compression ratio 14, the conditions of the air at the start of compression stroke are 1 bar and 300 K. After addition of heat at constant pressure, the temperature rises to 2774 K. Determine: a) the thermal efficiency of the cycle b) the net work done per kg of air and the c) mean effective pressure
1. An aluminum air-cooled engine cylinder head for a single cylinder, 2-stroke engine is to be...
1. An aluminum air-cooled engine cylinder head for a single cylinder, 2-stroke engine is to be die-cast. The overall diameter of the cylinder head is 101.6 mm. If the projected plan area of the runners and gating system is 100 mm2 and the casting pressure is 10 MPa (1500 psi), what minimum locking force is required for the die-casting machine in kN.
A piston-cylinder heat engine has five kilograms of air as the working fluid. Analyze this engine...
A piston-cylinder heat engine has five kilograms of air as the working fluid. Analyze this engine as a Carnot engine and determine the work of expansion and the amount of heat rejected in KJ assuming constant specific heat at 300k. During the heat rejection, the temperature is 300?. There is a temperature difference of 600 degrees in the engine. At the beginning of the heat rejection process, the pressure is .2MPa and during heat addition the volume doubles. Draw the...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT