Explain the procedure to generate a cylinder placed on top of a rectangular block using any...

Explain the procedure to generate a cylinder placed on top of a rectangular block using any CAD software.

Expert Solution

I will be telling procedure in Pro E

First select a plane from the 3d view. Then select sketch. Then sketcher will be open. Then draw 2d diagram of the rectangle using rectangle tool. Then select tick mark symbol. Now use extrude command and give the required height to the rectangle. A 3d rectangle block will be created. Now select the surface of the rectangle block on which cylinder is to be placed. Then select sketch. Sketcher will be open. Draw a circle of required diameter in sketcher(diameter should same as that of diameter of cylinder). Now click OK. Then select Extrude command and give reqired height to it. This will be height of cylinder. Select done and a cylinder on surface of rectangular block will be created.

samet mamat answered 2 years ago

A 4 kg block is placed at the top of an inclined plane. The plane is...

A 4 kg block is placed at the top of an inclined plane. The plane is 2.5 meters long and inclined at 34°. The coefficient of kinetic friction between the block and plane is 0.27. The block slides the 2.0 meters down the ramp. What speed does it have at the bottom?

Problem: A bottle is shaped with a right cone placed on top of a right cylinder....

Problem: A bottle is shaped with a right cone placed on top of a right cylinder. The radius of the cone and the cylinder is 1.5 inches. The height of the cone is 3 inches and the height of the cylinder is 5 inches. Find the volume of the bottle. About how much paper or plastic is needed to make a label for the cylindrical part of your bottle? Explain.

A 0.504 kg metal cylinder is placed inside the top of a plastic tube, the lower...

A 0.504 kg metal cylinder is placed inside the top of a plastic tube, the lower end of which is sealed off by an adjustable plunger. The cylinder comes to rest some distance above the plunger. The plastic tube has an inner radius of 5.54 mm and is frictionless. Neither the plunger nor the metal cylinder allow any air to flow around them. If the plunger is suddenly pushed upwards, increasing the pressure between the plunger and the metal cylinder...

2. Add a title comment block to the top of the new Python file using the...

2. Add a title comment block to the top of the new Python file using the following form # A brief description of the project 3. Ask user - to enter the charge for food 4. Ask user - to enter theTip for server ( remember this is a percentage , the input therefore should be decimal. For example, for a 15% tip, 0.15 should be entered) 5. Ask user - to enter the Tax amount ( this is a...

a) If 42.1 mL of 1.02 M sodium hydroxide, measured using a graduated cylinder, is placed...

a) If 42.1 mL of 1.02 M sodium hydroxide, measured using a graduated cylinder, is placed in a beaker filled with 300 mL of DI water, what is the concentration of the diluted NaOH solution? b) Why does this calculation only provide an estimate of the NaOH concentration? In other words, why do we have to standardize the NaOH in this experiment to find its exact concentration? (Hint: think about the glassware

Explain how a bandpass filter works and indicate by a block diagram what procedure should be...

Explain how a bandpass filter works and indicate by a block diagram what procedure should be followed to verify its correct operation.

Choose 3 terms to any of the following below and give its application. Explain the procedure...

Choose 3 terms to any of the following below and give its application. Explain the procedure on how it’s done and explain why/how it is related to the term. - Magnetic Field - Magnetic Force - Bio Savart Law - Electrostatic Force -Electrostatic Field - Hall Effect - Mass Spectrometer

Explain in detail, the procedure to identify the anode and cathode of an unmarked diode using...

Explain in detail, the procedure to identify the anode and cathode of an unmarked diode using an ohmmeter.

Choose any one embedded system application device or equipment. With aid of block diagram, explain the...

Choose any one embedded system application device or equipment. With aid of block diagram, explain the operation of the system, advantages and disadvantages of chosen device or equipment.

Explain the procedure for testing a hypothesis using the P-value approach? What is the criterion for...

Explain the procedure for testing a hypothesis using the P-value approach? What is the criterion for judging whether to reject the null hypothesis? 6. What does the level of significance represent in a test of hypothesis? Give an example. 7. Explain the difference between "accepting" and "not rejecting" a null hypothesis.

Question