Question

In: Physics

Draw diagrams to show how to measure a)outer diameter, b)inner diameter, c)depth using a Vernier Calliper.

Draw diagrams to show how to measure a)outer diameter, b)inner diameter,
c)depth using a Vernier Calliper.

Solutions

Expert Solution


Related Solutions

A toroid with inner diameter of 3 cm, outer diameter of 5 cm, and height of...
A toroid with inner diameter of 3 cm, outer diameter of 5 cm, and height of 0.1 cm is made of a body-centered-cubic (bcc) paramagnetic material with lattice parameter equal to 0.5 nm. The toroid is wrapped by a copper wire in 20 turns. If each atom of the magnetic material has a magnetic moment of 1.5µB (Bohr Magneton), (a) (1.5 pt) What is the saturation magnetization (in A/m) of the material? (b) (1.5 pt) If a current of 2...
‏1. The impeller in a centrifugal pump has inner diameter as 125 mm and outer diameter...
‏1. The impeller in a centrifugal pump has inner diameter as 125 mm and outer diameter as 270 mm. The pump runs at 1400 rpm. The vane angles of impeller at inlet and outlet are 17° and 30° respectively. The water enters the impeller radially and velocity of flow is constant. Determine the work done by impeller per unit weight of water.
A short and hollow cylindrical bar, having an outer diameter of 4.00 in and an inner...
A short and hollow cylindrical bar, having an outer diameter of 4.00 in and an inner diameter of 7 in, is subjected to two simultaneous loads - an axial compressive force of 75,100 lb. and a torsional moment of 20,100 lb • in. You are required to create two-dimensional (2D) and three-dimensional (3D) stress elements for two stress states on the outer and inner surfaces of the bar to in-plane and out-of-plane stresses, respectively and then draw the 2D and...
A brass ring with inner diameter 2.00 cm and outer diameter 3.00 cm needs to fit...
A brass ring with inner diameter 2.00 cm and outer diameter 3.00 cm needs to fit over a 2.00 cm-diameter steel rod, but at 20∘C the hole through the brass ring is 48 μmtoo small in diameter. To what temperature, in ∘C, must the rod and ring be heated so that the ring just barely slips over the rod?​
The inner and outer diameter of a single core cable are 3 cm and 8.5 cm...
The inner and outer diameter of a single core cable are 3 cm and 8.5 cm The insulated with two materials having relative permittivity of 5 and 3.5 respectively with corresponding maximum electric stresses of 35 kV/cm and 25 kV/cm. Draw the configuration and calculate: a) the radial thickness of each insulating layer. b) the safe working voltage of the cable. c) draw the voltage and electric stress as a function of radial distance from center to metal sheath.
A nonconducting spherical shell of inner radius a = 2.00 cm and outer radius b =...
A nonconducting spherical shell of inner radius a = 2.00 cm and outer radius b = 2.40 cm has (within its thickness) a positive volume charge density p = A/r, where A is a constant and r is the distance from the center of the shell. In addition, a small ball of charge q = 4.5 x 10 ^ -14 C is located at the center of that center. Find the total charge of the shell.
A small conducting spherical shell with inner radius a and outer radius b is concentric with...
A small conducting spherical shell with inner radius a and outer radius b is concentric with a larger conducting spherical shell with inner radius c and outer radius d. The inner shell has a total charge of -1q and the outer shell has a total charge of +3q. Select True or False for the following statements. 1. The total charge on the inner surface of the small shell is -4q. 2. The total charge on the outer surface of the...
A small conducting spherical shell with inner radius a and outer radius b is concentric with...
A small conducting spherical shell with inner radius a and outer radius b is concentric with a larger conducting spherical shell with inner radius c and outer radius d. The inner shell has a total charge of -2q and the outer shell has a total charge of +4q. Select True or False for the following statements. The total charge on the inner surface of the small shell is zero. True False  The total charge on the inner surface of the large...
A very long conducting tube (hollow cylinder) has inner radius a and outer radius b. It...
A very long conducting tube (hollow cylinder) has inner radius a and outer radius b. It carries charge per unit length ?? where ? is a positive constant with units of C/m. A line of charge lies along the axis of the tube. The line of charge has charge per unit length +?. Part E Calculate the magnitude the electric field in terms of ? and the distance r from the axis of the tube for r>b. Express your answer...
A very long conducting tube (hollow cylinder) has inner radius a and outer radius b. It...
A very long conducting tube (hollow cylinder) has inner radius a and outer radius b. It carries charge per unit length +?, where ? is a positive constant with units of C/m. A line of charge lies along the axis of the tube. The line of charge has charge per unit length +?. Part A Calculate the electric field in terms of ? and the distance r from the axis of the tube for r<a. Part B Calculate the electric...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT