An air conditioner using refrigerant-134a as the working fluid and operating on the ideal vapor-compression refrigeration...

An air conditioner using refrigerant-134a as the working fluid and operating on the ideal vapor-compression refrigeration cycle is to maintain a space at 30°C while operating its condenser at 1000 kPa. Determine the COP of the system when a temperature difference of 2°C is allowed for the transfer of heat in the evaporator. (Take the required values from saturated refrigerant-134a tables.)

The COP of the system is ?

Expert Solution

samet mamat answered 2 years ago

A vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated...

A vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated vapor enters the compressor at 2 bar, and saturated liquid exits the condenser at 10 bar. The isentropic compressor efficiency is 80%. The mass flow rate of refrigerant is 7 kg/min. Determine: (a) the compressor power, in kW. (b) the refrigeration capacity, in tons. (c) the coefficient of performance.

Refrigerant 134a is the working fluid in a vapor-compression heat pump system with a heating capacity...

Refrigerant 134a is the working fluid in a vapor-compression heat pump system with a heating capacity of 60,000 Btu/h. The condenser operates at 180 lbf/in.2, and the evaporator temperature is 0°F. The refrigerant is a saturated vapor at the evaporator exit and a liquid at 110°F at the condenser exit. Pressure drops in the flows through the evaporator and condenser are negligible. The compression process is adiabatic, and the temperature at the compressor exit is 180°F. Determine (a) the mass...

Refrigerant 134a is the working fluid in a vapor-compression heat pump that provides 35 kW to...

Refrigerant 134a is the working fluid in a vapor-compression heat pump that provides 35 kW to heat a dwelling on a day when the outside temperature is below freezing. Saturated vapor enters the compressor at 2.1 bar, and saturated liquid exits the condenser, which operates at 8 bar. Determine for an isentropic compressor efficiency of 75%: (a) the refrigerant mass flow rate, in kg/s. (b) the magnitude of the compressor power, in kW. (c) the coefficient of performance.

An air conditioner using R134a as the working fluid operates on an ideal vapour compression system...

An air conditioner using R134a as the working fluid operates on an ideal vapour compression system between 0.3 and 0.8 MPa. If the specified capacity for air conditioning is 20 kW. What would be its capacity for food freezing for which the evaporator temperature -20oC. Show the cycle on a PH diagram and explain the effect of the changes to the compressor and condenser respectively.

An ideal vapor compression refrigeration cycle using r134a as the refrigerant is being used to cool...

An ideal vapor compression refrigeration cycle using r134a as the refrigerant is being used to cool a house. It provides 3 refrigeration tons ≈ 10.5kW of cooling (heat removal from the house air). The refrigerant in the evaporator operates at 400kPa while in the condenser it is at 1000kPa. Treat the surroundings as a thermal reservoir at 33◦C and the air in the house as a thermal reservoir at 19◦C. All reservoirs are at 100kPa. 1. What is the COPr...

An ideal vapor compression refrigeration cycle with R134a as the working fluid operates between the pressure...

An ideal vapor compression refrigeration cycle with R134a as the working fluid operates between the pressure limits of 200 kPa and 1200 kPa. Determine a) the mass fraction of the refrigerant that is in the liquid phase at the inlet of the evaporator, and b) the amount of heat transfer (in kJ/kg) to the refrigerant in the evaporator (??).

An ice-making machine operates on the ideal-vapor compression cycle using refrigerant-134a. The refrigerant enters the compressor...

An ice-making machine operates on the ideal-vapor compression cycle using refrigerant-134a. The refrigerant enters the compressor as saturated vapor at 40 psia and leaves the condenser as saturated liquid at 80 psia. Water enters the ice machine at 55°F and leaves as ice at 25°F. For an ice production rate of 21 lbm/h, determine the power input to the ice machine (169 Btu of heat needs to be removed from each lbm of water at 55°F to turn it into...

a refrigerator uses refrigerant 134a as a working fluid and operates on the vapour -compression refrigiration...

a refrigerator uses refrigerant 134a as a working fluid and operates on the vapour -compression refrigiration cycle.the evaporator is maintained at -100C and the refrigirant is a dry saturated vapour as it leaves the evaporator. the compressor has an efficiency of 80%.the conditions at the outlet of the condensor are 300C and 9 bar. 1-if the mass flow rate of the refrigerant is 0,08kg/s workout the rate of heat removal from the refrigerant space.the power input to the cpmpressor and...

An ideal refrigeration cycle utilizes R-134a as a working fluid. If the fluid enters the compressor...

An ideal refrigeration cycle utilizes R-134a as a working fluid. If the fluid enters the compressor as saturated vapor at 6 C and enters a throttling valve as a saturated liquid at 1.2MPa. Assuming the mass flow rate of fluid is 1 kg/sec. 1. The heat received by the fluid (kJ) is 2. The heat received by the surroundings (kJ) is 3. The power input to the compressor (kJ) is 4. The coefficient of performance is

There is a vapor compression type refrigeration cycle using the refrigerant HFC 134 a. In the...

There is a vapor compression type refrigeration cycle using the refrigerant HFC 134 a. In the condenser, it is isostatically cooled, the condensation temperature is 50 ° C., and the condenser outlet is the compressed liquid at 45 ° C. In the evaporator, it is isothermally heated, the evaporation temperature is 10 ° C. and the outlet of the evaporator is heated steam at 15 ° C. When the expansion valve performs isenthalpic expansion, and the adiabatic efficiency of the...

Question