Consider a flat plate with parallel airflow (top and bottom) characterized by u∞ 5 m/s, T∞...

Consider a flat plate with parallel airflow (top and bottom) characterized by u∞ 5 m/s, T∞ 20°C. Determine the average convection heat transfer coefficient, convective heat transfer rate, and drag force associated with an 2.8-m-long, 2.8-m wide flat plate with a surface temperature of 50°C. Assume the critical Reynolds number is 5x10⁵.

Determine the average convection heat transfer coefficient, in W/m²·K.

Determine the convective heat transfer rate, in W.

Determine the drag force, in N.

Expert Solution

samet mamat answered 2 years ago

Air at 15°C flows at 9 m/s parallel to a thin flat plate measuring 260 mm...

Air at 15°C flows at 9 m/s parallel to a thin flat plate measuring 260 mm × 390 mm. The direction of flow is parallel to the 260-mm edges. The surface of the plate is at a uniform temperature of 85°C. The plate is in a large chamber with walls at a temperature of 22°C. The emissivity of the plate’s surfaces is 0·75. (a) Determine the rate of convective heat transfer from one side of the plate to air. [16]...

A liquid flows tangentially past a flat plate of dimensions total length of 4 m (parallel...

A liquid flows tangentially past a flat plate of dimensions total length of 4 m (parallel to the flow direction) and width of 1.5 m. fluid velocity is 1 m/s (length wise). What is the skin friction drag (shear force) on both sides of the plate? liquid density = 1000 kg/m3, dynamic viscosity = 2 x 10-2 N*s/m2.

Two flat plates of glass with parallel faces are on a table, one plate on the...

Two flat plates of glass with parallel faces are on a table, one plate on the other. Each plate is 11.0 cm long and has a refrac- tive index of 1.55. A very thin sheet of metal foil is inserted under the end of the upper plate to raise it slightly at that end, in a man- ner similar to that discussed in Example 35.4. When you view the glass plates from above with reflected white light, you observe that,...

A proton with an initial velocity of 3.9 106 m/s enters a parallel-plate capacitor at an...

A proton with an initial velocity of 3.9 106 m/s enters a parallel-plate capacitor at an angle of 46° through a small hole in the bottom plate as shown in the figure below. If the plates are separated by a distance d = 2.1 cm, what is the magnitude of the minimum electric field to prevent the proton from hitting the top plate? ___ N/C Compare your answer with the results obtained if the proton was replaced with an electron...

A proton is released from rest at the positive plate of a parallel-plate capacitor. It crosses the capacitor and reaches the negative plate with a speed of 45000 m/s.

A proton is released from rest at the positive plate of a parallel-plate capacitor. It crosses the capacitor and reaches the negative plate with a speed of 45000 m/s. What will be the final speed of an electron released from rest at the negative plate? Express your answer to two significant figures and include the appropriate units V=_________

S-16) a) Design a parallel plate capacitor with a capacitance of 5 pF with vacuum between...

S-16) a) Design a parallel plate capacitor with a capacitance of 5 pF with vacuum between the plates. b) What will change if a dielectric is placed between the plates with dielectric constant of 2. Alternate problem 16 (your choice, do the above capacitor problem or the resistor problem below) S-16r) a) Given that the resistivity of carbon in graphite form is 5 x 10-5 Ω*m, design a 10 Ω resister. Hint: choose a cylindrical shape and specify the length...

A thin, flat plate that is 0.2 m × 0.2 m on a side is oriented...

A thin, flat plate that is 0.2 m × 0.2 m on a side is oriented parallel to an atmospheric airstream having a velocity of 40 m/s. The air is at a temperature of ∞T∞= 20ºC, while the plate is maintained at Ts= 120ºC. The air flows over the top and bottom surfaces of the plate, and measurement of the drag force reveals a value of 0.075 N. What is the rate of heat transfer from both sides of the...

7.11 Consider two cases involving parallel flow of dry air at V = 1 m/s, T∞...

7.11 Consider two cases involving parallel flow of dry air at V = 1 m/s, T∞ = 45°C, and atmospheric pressure over an isothermal plate at Ts = 20°C. In the first case, Rex,c = 5 × 105, while in the second case the flow is tripped to a turbulent state at x = 0 m. At what x‐location are the thermal boundary layer thicknesses of the two cases equal? What are the local heat fluxes at this location for...

Air flows over a 4 meter long flat plate at a velocity of 8 m/s. Using...

Air flows over a 4 meter long flat plate at a velocity of 8 m/s. Using a spreadsheet, calculate the boundary layer thickness and wall shear stress at 0.1 meter intervals along the plate. Do not plot the wall shear stress at x=0. Use a transition Reynolds number of 5 x 10^5 . (You will need to calculate Rex at each location to determine if the laminar or turbulent correlations should be used.) Generate a spreadsheet table that includes columns...

Find the Laplace transforms: F(s)=L{f(t)} of the function f(t)=(8−t)(u(t−2)−u(t−5)), for s≠0. F(s)=L{f(t)}=

Question