One end of the tailgate is connected to the truck with hinge, and supported by two...

One end of the tailgate is connected to the truck with hinge, and supported by two cable when being opened. A stack of wood weighing Mw is placed on the edge of tailgate. Determine the average strain in the cable if both weigh causing each of the cable to elongates  = 0.25 mm. Note that the cable’s effective cross-sectional area is Ae = 11.0 mm2 and distance from the concentrated load due to Mw to the edge of tailgate that parallel to the hinge is dw = 460 mm

Expert Solution

samet mamat answered 2 years ago

A 4-m long, 150-kg steel beam is attached to a wall with one end connected to a hinge that allows the beam to rotate up and down

A 4-m long, 150-kg steel beam is attached to a wall with one end connected to a hinge that allows the beam to rotate up and down. The other end of the beam is held in a horizontal position with a cable that makes a 27° angle with the beam and is attached to the wall (see (Figure 1) ). What is the tension force that keeps this beam in static equilibrium?

A beam that weighs 200 N is connected to a wall by a hinge so that...

A beam that weighs 200 N is connected to a wall by a hinge so that it makes an angle of θ = 30.0◦ with the horizontal. The beam is 1.50 m long and is held in place by a cable that runs horizontally from the end of the beam to the wall. A box that weighs 100 N hangs from the end of the beam. Calculate a) the tension in the cable connected to the wall and b) the...

In the figure shown, one end of a uniform beam that weighs 827. N is attached to a wall with a hinge.

In the figure shown, one end of a uniform beam that weighs 827. N is attached to a wall with a hinge. The other end is held up by a wire. So the beam is in static equilibrium. There is an unknown horizontal and an unknown vertical force on the hinge.(a) Find the tension in the wire.N(b) What is the horizontal component of the force of the hinge on the beam?N(c) What is the vertical component of the force of...

A 1220-N uniform beam is hinged at a vertical wall at one end and is supported...

A 1220-N uniform beam is hinged at a vertical wall at one end and is supported by a cable that is attached to the beam at the other end. A 200-kg load hangs at the end of the beam. The lower end of the beam makes an angle of 30° above the horizontal, while the supporting cable is attached to the wall at an angle of 40°, as shown. (a) Calculate the magnitude of the tension in the supporting cable....

A 28.0 kg beam is attached to a wall with a hinge while its far end...

A 28.0 kg beam is attached to a wall with a hinge while its far end is supported by a cable such that the beam is horizontal. If the angle between the beam and the cable is θ = 57.0° what is the vertical component of the force exerted by the hinge on the beam?

A simple pin-connected truss is loaded and supported as shown in the figure.

A simple pin-connected truss is loaded and supported as shown in the figure. The load P is 200 kN. All members of the truss are aluminum pipes that have an outside diameter of 115 mm and a wall thickness of 6 mm. Determine the normal stress in each truss member. Assume truss dimensions of a = 12.0 m, b = 7.5 m, and c = 6.0 m.

A block with mass M is connected to one end of a horizontal spring of constant...

A block with mass M is connected to one end of a horizontal spring of constant k, the other end of which is attached to the wall. The block moves with a simple harmonic motion on a frictionless surface. The amplitude of the harmonic motion is A1. When the block passes through the equilibrium position, a piece of plasticine, of mass m, is dropped vertically on the block and remains glued to it. Calculate the energy of the system in...

A circular Euler column with one end fixed and the other pinned (or hinged or simply-supported)...

A circular Euler column with one end fixed and the other pinned (or hinged or simply-supported) is under a compressive axial load. Given the length L of the column and bending rigidity EI, what is the buckling load Pcr ?

A horizontal 14.9 kg beam 2.1 m long is attached to the wall by a hinge at its left end.

A horizontal 14.9 kg beam 2.1 m long is attached to the wall by a hinge at its left end. A cable is connected from the right end of the beam to the wall, at an angle of 27 ° above the beam, as shown below. A 55 kg sign is hung 1.6 m from the left end of the beam.Part A - Find the tension in the cable.Part B - Find the horizontal force exerted on the wall by the hinge.Part...

A study of conformity using the Asch paradigm involved two conditions: one where one confederate supported...

A study of conformity using the Asch paradigm involved two conditions: one where one confederate supported the true judgement and another where no confederate gave the correct response. Support No Support Conform 18 40 Not Conform 32 10 Is there a significant difference between the "support" and "no support" conditions in the frequency with which individuals are likely to conform? [Chi-Square = 19.87, with 1 df: ? < 0.05].

Question