A 4-m long, 150-kg steel beam is attached to a wall with one end connected to a hinge that allows the beam to rotate up and down

A 4-m long, 150-kg steel beam is attached to a wall with one end connected to a hinge that allows the beam to rotate up and down. The other end of the beam is held in a horizontal position with a cable that makes a 27° angle with the beam and is attached to the wall (see (Figure 1) ). What is the tension force that keeps this beam in static equilibrium?

Expert Solution

genius_generous answered 2 years ago

A horizontal 14.9 kg beam 2.1 m long is attached to the wall by a hinge at its left end.

A horizontal 14.9 kg beam 2.1 m long is attached to the wall by a hinge at its left end. A cable is connected from the right end of the beam to the wall, at an angle of 27 ° above the beam, as shown below. A 55 kg sign is hung 1.6 m from the left end of the beam.Part A - Find the tension in the cable.Part B - Find the horizontal force exerted on the wall by the hinge.Part...

A 28.0 kg beam is attached to a wall with a hinge while its far end...

A 28.0 kg beam is attached to a wall with a hinge while its far end is supported by a cable such that the beam is horizontal. If the angle between the beam and the cable is θ = 57.0° what is the vertical component of the force exerted by the hinge on the beam?

An 18.4 kg beam is attached to a wall by a hinge and it hangs out horizontally.

1. An 18.4 kg beam is attached to a wall by a hinge and it hangs out horizontally. From the end of the beam, a 27.1 kg metal sculpture is hung. A cable is attached to the wall above the beam and is attached to the beam. The cable makes an angle of 18.9 degrees with the wall. It attaches to the beam 2/7 of the way down from the hinge. What is the tension in the cable?2. A 31...

In the figure shown, one end of a uniform beam that weighs 827. N is attached to a wall with a hinge.

In the figure shown, one end of a uniform beam that weighs 827. N is attached to a wall with a hinge. The other end is held up by a wire. So the beam is in static equilibrium. There is an unknown horizontal and an unknown vertical force on the hinge.(a) Find the tension in the wire.N(b) What is the horizontal component of the force of the hinge on the beam?N(c) What is the vertical component of the force of...

A 100 kg uniform beam is attached to a vertical wall at one end and is...

A 100 kg uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. Calculate the magnitude of the vertical component of the force that the wall exerts on the left end of the beam if the angle between the cable and horizontal is θ = 43°. The angle between the horizontal and the beam is 30 degrees.

one end of a uniform beam of mass 5 kg is mounted at the wall by...

one end of a uniform beam of mass 5 kg is mounted at the wall by hinges and the other end is held by a cable which is connected to the ceiling. The cable forms a 60 degree angle with the horizontal beam. Applying the equilibrium condition, find the force of tension at the cable and the vertical and horizontal components of the force of the hinge Fv and Fh on the beam and indicate their directions.

A 23.3-kg mass is attached to one end of a horizontal spring, with the other end of the spring fixed to a wall.

Part AA 23.3-kg mass is attached to one end of a horizontal spring, with the other end of the spring fixed to a wall. The mass is pulled away from the equilibrium position (x = 0) a distance of 17.5 cm and released. It then oscillates in simple harmonic motion with a frequency of 8.38 Hz. At what position, measured from the equilibrium position, is the mass 2.50 seconds after it is released?–5.23 cm16.6 cm–5.41 cm–8.84 cm–11.6 cm Part BA 23.3-kg...

Consider a long (length = 15 m) uniform wooden beam (mass = 60 kg) attached horizontally...

Consider a long (length = 15 m) uniform wooden beam (mass = 60 kg) attached horizontally to a wall that can only support a vertical load ( The horizontal component of the force of the wall on the beam is identically zero). There is a chandelier (mass = 40 kg) hanging at a distance = 4.21 meter from the end of the beam that is attached to the wall. There is a vertical cable hanging down from the ceiling that...

A 3.20-m-long, 500 kg steel uniform beam extends horizontally from the point where it has been...

A 3.20-m-long, 500 kg steel uniform beam extends horizontally from the point where it has been bolted to the framework of a new building under construction. A 70 kg construction worker stands at the far end of the beam. What is the magnitude of the torque about the bolt due to the worker and the weight of the beam?

An aluminum rod, 1.0 m long, is held lightly in the middle. One end is struck head-on with a rubber mallet so that a longitudinal pulse —a sound wave—travels down the rod. The fundamental frequency of the longitudinal vibration is 2.55 kHz.

An aluminum rod, 1.0 m long, is held lightly in the middle. One end is struck head-on with a rubber mallet so that a longitudinal pulse —a sound wave—travels down the rod. The fundamental frequency of the longitudinal vibration is 2.55 kHz. (a) Describe the locations of the displacement and pressure nodes and antinodes for the fundamental mode of vibration. (b) Calculate the speed of sound in aluminum from the information given in the problem. (c) The vibration of the...

Question