Question

In: Mechanical Engineering

what are some examples of everyday objects/things that use: gas power cycle vapor power cycle refrigeration...

what are some examples of everyday objects/things that use:

gas power cycle

vapor power cycle

refrigeration cycle

Solutions

Expert Solution

1) Gas power cycle - The working fluid remains in the gaseous state throughout the entire cycle.

  • Example for Gas Power cycles are Otto cycle, Diesel cycle, Brayton cycle.
  • Petrol engine, diesel engine, Natural gas power plants are objects working on concept of Gas power cycle.

2) vapor power cycle -  The working fluid exist in two phase. one part of the cycle will be in vapor phase and other part will be in liquid phase.

  • Thermal power plants, Nuclear power plants are objects working on concept of vapour power cycle.

3)  refrigeration cycle

  • Refrigerator, Air conditioner, Heat pumps are objects  working on concept of .refrigeration cycle.

Related Solutions

There is a vapor compression type refrigeration cycle using the refrigerant HFC 134 a. In the...
There is a vapor compression type refrigeration cycle using the refrigerant HFC 134 a. In the condenser, it is isostatically cooled, the condensation temperature is 50 ° C., and the condenser outlet is the compressed liquid at 45 ° C. In the evaporator, it is isothermally heated, the evaporation temperature is 10 ° C. and the outlet of the evaporator is heated steam at 15 ° C. When the expansion valve performs isenthalpic expansion, and the adiabatic efficiency of the...
The power-plant will have 380 MWe electric power. The proposed gas-vapor cycle is different from traditionally...
The power-plant will have 380 MWe electric power. The proposed gas-vapor cycle is different from traditionally used ones. It consists of closed gas turbine cycle (instead of open gas turbine cycle used commonly). The working fluid is helium and the cycle consists of a compressor, a heater, a turbine and a cooler. The cooler acts as heat recovery steam generator (HRSG) for steam cycle. Other components of cycle are turbine condenser and pump. The condition at inlet to compressor is...
4: Consider a vapor refrigeration cycle. a: Draw the T-s diagram of the reversed Carnot Cycle...
4: Consider a vapor refrigeration cycle. a: Draw the T-s diagram of the reversed Carnot Cycle and describe what kind of problem each process of the cycle has explicitly. (We use the mixture of liquid and vapor as its working fluid.) b: Draw a T-s diagram in the ideal refrigeration cycle and label each process explicitly. Write down the COP in terms of enthalpy. c: There are the multipurpose refrigeration system and the multistage refrigeration system to improve the ideal...
A normal refrigeration cycle uses one coolant, so why does vapor compression cycle of an ice...
A normal refrigeration cycle uses one coolant, so why does vapor compression cycle of an ice rink you a primary coolant and a secondary coolant?
Post a one paragraph summary about how objects you use in everyday life use some kind...
Post a one paragraph summary about how objects you use in everyday life use some kind of modulation. Please DO NOT copy from the internet...the answer to my last question was copied And please typed answer, not hand-written.
A vapor-compression refrigeration cycle working with R22 contains a liquid-to-suction heat exchanger.
A vapor-compression refrigeration cycle working with R22 contains a liquid-to-suction heat exchanger. The saturated liquid refrigerant at 40 ℃ leaving the condenser and enteringthe heat exchanger is used to superheat the saturated vapor refrigerant leaving the evaporator at 7 ℃ by 8 ℃. If the compressor is capable of pumping 5 1/s of vapor refrigerant measuredat the inlet to the compressor and the compression processes are considered isentropic in both cases listed below, determine; (a) The refrigerating capacity in kW,...
An ideal vapor compression refrigeration cycle using r134a as the refrigerant is being used to cool...
An ideal vapor compression refrigeration cycle using r134a as the refrigerant is being used to cool a house. It provides 3 refrigeration tons ≈ 10.5kW of cooling (heat removal from the house air). The refrigerant in the evaporator operates at 400kPa while in the condenser it is at 1000kPa. Treat the surroundings as a thermal reservoir at 33◦C and the air in the house as a thermal reservoir at 19◦C. All reservoirs are at 100kPa. 1. What is the COPr...
An ideal vapor compression refrigeration cycle with R134a as the working fluid operates between the pressure...
An ideal vapor compression refrigeration cycle with R134a as the working fluid operates between the pressure limits of 200 kPa and 1200 kPa. Determine a) the mass fraction of the refrigerant that is in the liquid phase at the inlet of the evaporator, and b) the amount of heat transfer (in kJ/kg) to the refrigerant in the evaporator (??).
A vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated...
A vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated vapor enters the compressor at 2 bar, and saturated liquid exits the condenser at 10 bar. The isentropic compressor efficiency is 80%. The mass flow rate of refrigerant is 7 kg/min. Determine: (a) the compressor power, in kW. (b) the refrigeration capacity, in tons. (c) the coefficient of performance.
What are some examples of manufacturing that conform to the product life-cycle? What are some examples...
What are some examples of manufacturing that conform to the product life-cycle? What are some examples that don't?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT