Question

In: Physics

Standby power (sometimes called vampire power) is the power used by a device that is off...

Standby power (sometimes called vampire power) is the power used by a device that is off but plugged in and in a standby mode. Regulations typically limit this power to 1 Watt. If electricity costs $0.10 per kilowatt-hour, then to the nearest order of magnitude, and assuming 1 Watt, how much does it cost to leave a device in standby mode for one year?

(A) $0.01

(B) $0.10

(C) $1.00

(D) $10.00

(E) $100.00

Expert Solution

Time,

Power,

So, energy dissipated in 1 year,

Electricity cost is per kilowatt-hour.

So, total electricity cost in one year

So, option C) is correct.

genius_generous answered 3 years ago

A left ventricular assist device (LVAD) is a medical device that is sometimes used as an...

A left ventricular assist device (LVAD) is a medical device that is sometimes used as an alternative to heart transplant for patients who have a weakened left ventricle. Once implanted, the LVAD pumps blood from the left ventricle to the aorta. Name the phase of the cardiac cycle that this device assists. _____________ Describe the status of the AV and SL valves during this phase_________

I want a report on ‏)Gas Turbine Power Plant as are being used as standby plants...

I want a report on ‏)Gas Turbine Power Plant as are being used as standby plants for hydro-electric)

Controls of the same type in case-control studies are sometimes used to increase the power of...

Controls of the same type in case-control studies are sometimes used to increase the power of the study. True False

Why are approximated, rather than actual, net realizable values at split-off sometimes used to allocate joint cost?

Operational planning, sometimes called tactical planning, is the short-term planning used for achieving operational goals. True...

Operational planning, sometimes called tactical planning, is the short-term planning used for achieving operational goals. True or False. Why?

Professor Modyn owns a device called a pneumatic accumulator. This device maintains constant pressure of 217.00...

Professor Modyn owns a device called a pneumatic accumulator. This device maintains constant pressure of 217.00 psia as air enters by using a piston. Initially the device is filled with air at 76.74 °F and the volume is 0.317 ft3 (State 1). Air at 191.2 °F and 217.00 psia is fed into the accumulator until the volume triples and the temperature increases to 181.2 °F (State 2). Assume air is an ideal gas with a CP = 3.5R and MW...

A proposed cost-saving device has an installed cost of $800,000. The device will be used in...

A proposed cost-saving device has an installed cost of $800,000. The device will be used in a five-year project but is classified as three-year MACRS property for tax purposes. The required initial net working capital investment is $81,000, the marginal tax rate is 23 percent, and the project discount rate is 8 percent. The device has an estimated Year 5 salvage value of $124,000. What level of pretax cost savings do we require for this project to be profitable? MACRS...

A proposed cost-saving device has an installed cost of $815,000. The device will be used in...

A proposed cost-saving device has an installed cost of $815,000. The device will be used in a five-year project but is classified as three-year MACRS property for tax purposes. The required initial net working capital investment is $87,000, the marginal tax rate is 21 percent, and the project discount rate is 11 percent. The device has an estimated Year 5 salvage value of $133,000. What level of pretax cost savings do we require for this project to be profitable? What...

A proposed cost-saving device has an installed cost of $705,000. The device will be used in...

A proposed cost-saving device has an installed cost of $705,000. The device will be used in a five-year project but is classified as three-year MACRS property for tax purposes. The required initial net working capital investment is $115,000, the marginal tax rate is 22 percent, and the project discount rate is 13 percent. The device has an estimated Year 5 salvage value of $86,000. What level of pretax cost savings do we require for this project to be profitable? MACRS...

A proposed cost-saving device has an installed cost of $725,000. The device will be used in...

A proposed cost-saving device has an installed cost of $725,000. The device will be used in a five-year project but is classified as three-year MACRS property for tax purposes. The required initial net working capital investment is $135,000, the marginal tax rate is 21 percent, and the project discount rate is 13 percent. The device has an estimated Year 5 salvage value of $98,000. What level of pretax cost savings do we require for this project to be profitable? MACRS...