Which standards document describes the performance parameters for CEBus control devices? A. HPNA 1.0 B. ANSI/TIA/EIA...

Which standards document describes the performance parameters for CEBus control devices?

A. HPNA 1.0

B. ANSI/TIA/EIA 570-A

C. EIA 600

D. ANSI/TIA/EIA 568-B

Solutions

Expert Solution

Answer C is correct. The CEBus standard adopted by the EIA as EIA 600 is a protocol specification to support the interconnection and interoperation of consumer products in a home. The CEBus standard's power-line carrier technology uses the home's 120v, 60Hz electrical wiring to transport messages between household devices. CEBus is an acronym for consumer electronics bus. Answer A is incorrect because HPNA 1.0 is the earlier specification for a home phone-line networking protocol adopted by the Home Phone Network Alliance. Answer B is incorrect because the ANSI/TIA/EIA 570-A is the Residential Telecommunications Cabling Standard and is not associated with the CEBus EIA 600 standard. Answer D is incorrect because the ANSI/TIA/EIA 568-A is the Commercial Building Telecommunications Cabling Standard and is not associated with the CEBus standard.

venereology answered 1 year ago

Next > < Previous

Related Solutions

Which standards document describes the performance parameters for CEBus control devices? A. HPNA 1.0 B. ANSI/TIA/EIA...

Which standards document describes the performance parameters for CEBus control devices? A. HPNA 1.0 B. ANSI/TIA/EIA 570-A C. EIA 600 D. ANSI/TIA/EIA 568-B

1.-¿which is why the control of electronic devices is based on a computer? 2.- Describes the...

1.-¿which is why the control of electronic devices is based on a computer? 2.- Describes the operations that occur in the “op code fetch”: 3.- Draw the diagram to blocks of a generic CPU. Mention the function of each block. Mention the name of the records typically found in each block.

A document that describes policies to control how computer resources are used is an example of:

Which of the following describes a document sent to verify an organization’s identity to the CA?

Which of the following describes a document sent to verify an organization’s identity to the CA?Digital trust application formPKI escrow formTrusted Site Application formCertificate-signing request

The ________ is a document which describes how the project management team will implement the performing...

The ________ is a document which describes how the project management team will implement the performing organization's quality policy. Group of answer choices Quality management plan Quality assurance plan Quality audit Quality commitment

1. The following XML document describes some employees of a company. <?xml version="1.0" encoding="UTF-8"?> <company> <person...

1. The following XML document describes some employees of a company. <?xml version="1.0" encoding="UTF-8"?> <company> <person age="25" id="p29432" manager="p48293"> <ssn>123456789</ssn> <name> John Davis</name> <office>B432</office> <phone>1234</phone> </person> <person age="27" id="p29333" manager="p48222"> <ssn>987654321</ssn> <name>Jim Handler</name> <office>B123</office> </person> <person age=55 id="p29432" manager="p48221"> <ssn>123456789</ssn> <name> Christo Dichev</name> <office>A4210</office> <phone>2477</phone> </person> <person age="57" id="p29333" manager="p4832"> <ssn>987654321</ssn> <name>Elva Jones</name> <office>A4211</office> </person> </company> 1. Check if the XML document is well-formed. If it is not, change it so that it becomes wellformed, making as little changes as...

Control is a regulatory process of establishing standards to achieve organizational goals, comparing actual performance to...

Control is a regulatory process of establishing standards to achieve organizational goals, comparing actual performance to the standards, and taking corrective action when necessary to restore performance to those standards. Control is achieved when behavior and work procedures conform to standards and when company goals are accomplished. Standards are a basis of comparison for measuring the extent to which organizational performance is satisfactory or unsatisfactory. Standards can also be determined by benchmarking other companies. Benchmarking is the process of determining...

Hydrogen is used in some semiconducting devices to improve their performance. Consider a material in which...

Hydrogen is used in some semiconducting devices to improve their performance. Consider a material in which atomic hydrogen (H) diffuses at 1.8 × 10-24 m2/s at 329 K. 1) When in use, the device is exposed to a large electric field. If the force on each charged hydrogen nucleus is 10 -11 N, use the fluctuation-dissipation relation to find out how fast they drift in the field at 329 K.

Based on court decisions, which of the following is not one of the standards for performance...

Based on court decisions, which of the following is not one of the standards for performance appraisal? Appraisal systems that require supervisors to provide feedback about appraisal results to the affected employees Performance criteria should be based on sound job descriptions Appraisal systems should provide specific written instructions on how to conduct appraisal Performance criteria should be based on what the employee considers important

QUESTION 1 Tick the option which correctly describes the units of parameters defined in an operation...

QUESTION 1 Tick the option which correctly describes the units of parameters defined in an operation sheet? a. Cutting Speed (ft/min), Spindle Speed (rev/min), Feed (in/rev), Depth of Cut(in) b. Cutting Speed (in/min), Spindle Speed (rev/sec), Feed (mm/rev), Depth of Cut(in) c. Cutting Speed (ft/min), Spindle Speed (rev/min), Feed (in/rev), Depth of Cut(mm) d. Cutting Speed (ft/sec), Spindle Speed (rev/min), Feed (mm/rev), Depth of Cut(mm) 10 points QUESTION 2 What steps are necessary for Process Planning of a job...

Subjects