Question

In: Physics

A horizontal piston assembly contains water. The piston is connected to a shaft, which can apply...

A horizontal piston assembly contains water. The piston is connected to a shaft, which can apply different forces to the piston as the water is expanded or compressed. Initially the apparatus contains a saturated liquid-vapor mixture of water at .9 bar with quality of 80% and a volume of 1.0 m^3. The shaft is programmed to move following a polytropic processs until the volume doubles and the pressure is 0.7 bar.

A) For the initial state, what percent of the total volume is occupied by vapor?

B) Could Kinetic and potential effects be neglected for the system? Why or Why not?

C) Determine the amount of heat transfer required to accompany the process in kJ

D) For the initial state, calculate the amount of mass present in the vapor phase kg

E) Determine the type of polytrophic process (find n when PV^n= Constant

If you could answer all the question you’d be absolutely amazing

Solutions

Expert Solution

Hit the LIKE BUTTON please .....THANK YOU


Related Solutions

A piston–cylinder assembly contains 2 lb of water, initially at 100 lbf/in.2 and 600°F. The water...
A piston–cylinder assembly contains 2 lb of water, initially at 100 lbf/in.2 and 600°F. The water undergoes two processes in series: a constant-pressure process followed by a constant volume process. At the end of the constant-volume process, the temperature is 300°F and the water is a two-phase liquid–vapor mixture with a quality of 50%. Neglect kinetic and potential energy effects. Determine the work and heat transfer for each process, all in Btu.
A horizontal rectangular piston contains 1.85 mol of a polyatomic ideal gas at a pressure of...
A horizontal rectangular piston contains 1.85 mol of a polyatomic ideal gas at a pressure of 1.013x10^5 Pa and a temperature of 322.5 C. The gas within the piston is cooled to 264.0 C. (a) If the piston undergoes an isovolumetric process, what is the change in entropy of the gas? J/K (b) If the piston undergoes an isobaric process inside the chamber, what is the change in entropy of the gas? J/K
Rigid tank A and tank B (containing water) are connected to a piston cylinder with two...
Rigid tank A and tank B (containing water) are connected to a piston cylinder with two valves as shown below. The piston cylinder assembly is initially (state 1) empty when the valves are closed. The pressure required to float the piston is 800kPa, the piston is constantly loaded and is free to move. Now the valves are opened and the fluid reaches a uniform state at 250C within the system (state 2). Determine: (a) The final volume (5 points) (b)...
Water contained in a piston-cylinder assembly as shown in the Figure below, initially at 1.5 ???...
Water contained in a piston-cylinder assembly as shown in the Figure below, initially at 1.5 ??? and a quality of 20%, is heated at a constant pressure until the piston hits the stops. Heating then continues until the water is saturated vapor. Show the processes of the water in series on a sketch of the ?-? diagram. For the overall process of the water, evaluate the work and heat transfer, each in ??⁄??. Kinetic and potential effects are negligible. (please...
A piston with a volume of 0.5 m ^ 3 contains 0.9 kg of water at...
A piston with a volume of 0.5 m ^ 3 contains 0.9 kg of water at a pressure of 0.2 MPa. Heat is transferred to the cylinder until the temperature of the steam at constant pressure is 250 ° C. What happens if the change in kinetic and potential energy is neglected? A piston with a volume of 0.5 m ^ 3 contains 0.9 kg of water at a pressure of 0.2 MPa. Heat is transferred to the cylinder until...
Water in a piston-cylinder assembly is at 1 MPa, 500◦C. There are two stops, a lower...
Water in a piston-cylinder assembly is at 1 MPa, 500◦C. There are two stops, a lower one at which Vmin = 1 m3 and an upper one at Vmax = 3 m3. The piston is loaded with a mass and outside atmosphere such that it floats when the pressure is 500 kPa. This setup is now cooled to 100◦C by rejecting heat to the surroundings at 20◦C. a. Show the path of the process on T-V and P-V diagrams. b....
A water treatment plant has three identical horizontal shaft flocculation tanks. Each tank is composed of...
A water treatment plant has three identical horizontal shaft flocculation tanks. Each tank is composed of three stages with size of 4 m depth, 14.1 m length and 15 m width. G value of each stage is 40 s-1, 30 s-1 and 20 s-1. Mean water temperature is 15°C (μ = 1.139×10-3). What are the power requirements for flocculation stages in a single flocculation tank. And Is the flocculation tank in an efficient way? ( Plant's average flow rate of...
One kg of water in a piston-cylinder assembly, initially at 1.5 bar and 200 C, cools...
One kg of water in a piston-cylinder assembly, initially at 1.5 bar and 200 C, cools at constant pressure with no internal irreversibilities to a final state where the water is a saturated liquid. For the water as the system, determine the work, the heat transfer, and the amounts of exergy transfer accompanying work and heat transfer, each in kJ. Let T0 = 20 °C, p0=1 bar and ignore the effects of motion and gravity. THERE ARE SOME DIFFERENT ANSWERS...
One kilogram of water in a piston-cylinder assembly undergoes the two internally reversible processes in series....
One kilogram of water in a piston-cylinder assembly undergoes the two internally reversible processes in series. P1 = 0.1 MPa, T1 = 100C, s1 = s2​ = 7.3164 kJ/kg*K​, P2 = 0.5 MPa, T2 = T3, P3 = 1.5 MPa, and u1 = 2506.7 kJ/kg. Find T2. Legibly show and explain all work, units, and formulas.
Five kg of water is contained in a piston–cylinder assembly, initially at 5 bar and 500°C....
Five kg of water is contained in a piston–cylinder assembly, initially at 5 bar and 500°C. The water is slowly heated at constant pressure to a final state. The heat transfer for the process is 2660 kJ and kinetic and potential energy effects are negligible. Determine the final volume, in m3, and the work for the process, in kJ. There is no final temperature information given.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT