The drawing shows an ideal gas confined to a cylinder by a massless piston that is...

The drawing shows an ideal gas confined to a cylinder by a massless piston that is attached to an ideal spring. Outside the cylinder is a vacuum. The cross-sectional area of the piston is A = 2.50 × 10-3 m2. The initial pressure, volume, and temperature of the gas are, respectively, P0, V0 = 6.00 × 10-4 m3 and T0 = 273 K, and the spring is initially stretched by an amount x0 = 0.092 m with respect to its unstrained length. The gas is heated, so that its final pressure, volume, and temperature are Pf, Vf and Tf and the spring is stretched by an amount xf = 0.14 m with respect to its unstrained length. What is the final temperature of the gas?

Solutions

Expert Solution

genius_generous answered 1 year ago

Next > < Previous

Related Solutions

The drawing shows an ideal gas confined to a cylinder by a massless piston that is...

A cylinder containing ideal gas is sealed by a piston that is above the gas. The...

A cylinder containing ideal gas is sealed by a piston that is above the gas. The piston is a cylindrical object, with a weight of 36.0 N, which can slide up or down in the cylinder without friction. The inner radius of the cylinder, and the radius of the piston, is 7.00 cm. The top of the piston is exposed to the atmosphere, and the atmospheric pressure is 101.3 kPa. The cylinder has a height of 30.0 cm, and, when...

Constant amount of ideal gas is kept inside a cylinder by a piston. The piston is...

Constant amount of ideal gas is kept inside a cylinder by a piston. The piston is locked in to position, it is not allowed to move. The gas is then heated up. Compare the initial (i) and the final (f) physical quantities of the gas to each other. (The fill in the blank options are greater than, less than, or equal too). The volume Vf is ... Vi. The temperature Tf is ... Ti. The internal energy Uf is ......

Two moles of gas are confined in a piston–cylinder device. Initially, the temperature is at 300...

Two moles of gas are confined in a piston–cylinder device. Initially, the temperature is at 300 K and the pressure is 1 bar. The gas is compressed isothermally to 5 bar. If the ideal gas heat capacity is C ig P = 7R/2, find Q, W, ?U, ?H, and ?S if: (a) the gas is ideal, or (b) the gas satisfies the van der Waals equation of state with a = 5.0 × 106 bar · cm6/mol2 and b =...

1mol of an ideal gas is inside a cylinder with a piston under a pressure of...

1mol of an ideal gas is inside a cylinder with a piston under a pressure of 6 atm. When reducing the pressure to 2 atm at constant T = 300K: (a) Who is doing work, the piston or the gas? (b) What is the type of process for the maximum work? Find the maximum amount of work. (c) What is the type of process for the minimum work? Find the minimum amount of work.

n ideal gas is enclosed in a cylinder with a movable piston on top of it....

n ideal gas is enclosed in a cylinder with a movable piston on top of it. The piston has a mass of 8,000 g and an area of 5.00 cm2 and is free to slide up and down, keeping the pressure of the gas constant. (a) How much work is done on the gas as the temperature of 0.180 mol of the gas is raised from 30.0°C to 325°C?

Two moles of nitrogen gas at 25°C, confined within a cylinder by a piston maintaining a...

Two moles of nitrogen gas at 25°C, confined within a cylinder by a piston maintaining a constant pressure of 1 atm, is heated with 5.30 kJ of energy. Assume all the energy is used to do work of expansion of the gas at 1 atm. What will be the final temperature of the gas? Recall ∆H = ∆E + P∆V and watch your units!

A monatomic ideal gas is contanined in a cylinder with a moveable piston. Initially the volume...

A monatomic ideal gas is contanined in a cylinder with a moveable piston. Initially the volume of the cylinder is 0.25m^3. The gas is compressed under a constant pressure of 3 Pa until the volume has been halved. Then the volume is held constant while the pressure is doubled. Finally, the gas is allowed to expand isothermally back to its original condition. a)Sketch a P-V diagram for this process. Label the corners 1, 2, 3 with 1 being the beginning...

Consider a sample of ideal gas (0.50 moles) confined in a piston assembly that has diathermal...

Consider a sample of ideal gas (0.50 moles) confined in a piston assembly that has diathermal walls (i.e. the walls allow heat exchange). The assembly is in contact with a thermal reservoir that holds the temperature constant at 300.K. a) Suppose the ideal gas undergoes reversible isothermal compression from 25.0 L to 10.0 L. Calculate ΔS, ΔSsurrounding, and ΔStotal, where total = universe. b) Suppose the ideal gas had instead been compressed isothermally by an external constant pressure from 25.0...

A gas confined in a piston-cylinder arrangement occupies 0.5 liters (Vi) at 4 atm (Pi) and...

A gas confined in a piston-cylinder arrangement occupies 0.5 liters (Vi) at 4 atm (Pi) and 278 K (Ti). From this initial state the gas is allowed to expand against the surrounding atmosphere which is at a constant pressure of 1 atm (Patm) and a temperature of 278 K. At equilibrium, the gas’s final volume (Vf) is 2 liters and its final temperature (Tf) is 278 K. The initial and final states are indicated in the figure below. a. In...

Subjects