Describe your design for a transformer that steps up voltage from 120 to 1200 V. (Talk...

Describe your design for a transformer that steps up voltage from 120 to 1200 V. (Talk about the numbers of turns and the material of the core, specifically.) Will the input and output be AC or DC electricity (there is only one right answer for this one unless you get fancy)? Compare the input current to the output current (hint: the output power in the secondary coils should be calculated to be the same (actually slightly less, due to inefficiencies) as the input power in primary coils.

Talk briefly about another device that uses induction for practical purposes.

Expert Solution

genius_generous answered 2 years ago

The charger for a cellphone contains a transformer that reduces 120 V AC to 4.92 V...

The charger for a cellphone contains a transformer that reduces 120 V AC to 4.92 V AC to charge the 3.7 V battery. Suppose the secondary coil contains 50 turns and the charger supplies 680 mA. Calculate (a) the number of turns in the primary coil, (b) the current in the primary, (c) the power transformed and (d) repeat parts (a) to (c) with a 240 V AC to 6.78 V AC

In Europe the standard voltage in homes is 220 V instead of the 120 V used...

In Europe the standard voltage in homes is 220 V instead of the 120 V used in the United States. Therefore "100-W" European bulb would be intended for use with a 220-V potential difference. (a) If you bring a "100-W" European bulb home to the untied States, what should be its US power rating? (b) How much current will the 100-W European bulb draw in normal use in the United States? [Answers: 29.8 W, 0.248 A] The answers are provided....

A 1200 kW, 550 V DC generator has a terminal voltage of 500 V at rated...

A 1200 kW, 550 V DC generator has a terminal voltage of 500 V at rated current. It is being driven at a speed of 400 rpm. The armature resistance is 0.0009 Ω. a. Determine the armature voltage. b. Determine the developed torque. c. Determine the armature copper loss.

1 The line to ground voltages on the high voltage side of a step-up transformer are...

1 The line to ground voltages on the high voltage side of a step-up transformer are 100 kV, 33 kV and 38 kV on phases a, b and c respectively. The voltage of phase a leads that of phase b by 100° and lags that of phase c by 176.5°. Determine the symmetrical negative phase sequence component of phase a. 2. A 3-phase, 4-wire system supplies loads which are unequally distributed in the three phases. An analysis of the current...

A plug-in transformer supplies 9.00 V to a video game system. How many turns are in its secondary coil if its input voltage is 120 V and the primary coil has 381 turns?

(A) A plug-in transformer supplies 9.00 V to a video game system. How many turns are in its secondary coil if its input voltage is 120 V and the primary coil has 381 turns? What is its input current when its output is 1.33 A? (B)What is the characteristic time constant of a 24.2 mH inductor that has a resistance of 4.08 Ω? If it is connected to a 12.0 V battery, what is the current after 12.5 ms? (C)Two...

Write an expression for the instantaneous voltage ?(?) delivered by an ac generator supplying 120 V...

Write an expression for the instantaneous voltage ?(?) delivered by an ac generator supplying 120 V rms at 70 Hz. Assume the voltage is 0 at time ?=0, and leave the factors in exact form; do not round their values. Write the argument of the sinusoidal function to have units of radians, but omit the units.

A 120 V rms voltage at 60.0 Hz is applied across an inductor, a capacitor, and...

A 120 V rms voltage at 60.0 Hz is applied across an inductor, a capacitor, and a resistor in series. If the peak current in this circuit is 0.84840 A, what is the impedance of this circuit?

A blow-dryer and a vacuum cleaner each operate with a voltage of 120 V. The current...

A blow-dryer and a vacuum cleaner each operate with a voltage of 120 V. The current rating of the blow-dryer is 9.2 A, while that of the vacuum cleaner is 5.9 A. Determine the power consumed by (a) the blow-dryer and (b) the vacuum cleaner. (c) Determine the ratio of the energy used by the blow-dryer in 18 minutes to the energy used by the vacuum cleaner in 56 minutes.

Design a buck-boost converter with a source varying from 10 to 14 V. The output voltage...

Design a buck-boost converter with a source varying from 10 to 14 V. The output voltage is regulated at – 12 V. The load varies from 10 to 15 W. The output voltage ripple must be less than 1 % for any operating condition. a) Determine the range of the duty ratio of the switch. b) Design the inductor and capacitor values used in your design. c) Confirm your solutions using a simulation software for every operating condition (you must...

A transformer is intended to decrease the value of the alternating voltage from 500 volts to...

A transformer is intended to decrease the value of the alternating voltage from 500 volts to 25 volts. The primary coil contains 200 turns. Find the necessary number of turns N2 in the secondary coil. A transformer is intended to decrease the value of the alternating current from 500 amperes to 25 amperes. The primary coil contains 200 turns. Find the necessary number of turns N2 in the secondary coil. In a transformer, the primary coil contains 400 turns, and...

Question