Question
In: Math
A bath tub with a volume of 400 liters at first is full of 100 liters...
A bath tub with a volume of 400 liters at first is full of 100 liters of water with a bath salt concentration of 10 grams per liter. During some time, water with a bath salt concentration of .8 grams per liter starts to stream at 4 liters per minute simultaneously a leak in the tub causes the water and bath salt mix to stream out of the bath tub at the same pace. Determine the amount of time needed for the water and bath salt mix in the bath tub to be lessen to 3 grams per liter, please show all work and explanations!
Solutions
milcah answered 2 years agoRelated Solutions
20 liters of water at 20 bar and 100 °C are in a variable volume container....
20 liters of water at 20 bar and 100 °C are in a variable volume
container. 56,000 kJ of heat are added to the system at constant
pressure which causes an increase in both temperature and
volume.
Draw a schematic of the process
Write the energy balance for this process and clearly state any
assumptions:
What is the final volume of the container?
How much work in [kJ] is completed? Pay careful attention to
your negative signs!
In one sentence...
A 1000L tub containing red and white plastic beads is initially full and 30% of the...
A 1000L tub containing red and white plastic beads is initially
full and 30% of the beads are red. Some workers are constantly
dumping buckets of beads (2L size, containing half red and half
white) into the tub at a rate of 1 bucket every 30 seconds. Other
workers are continuously stirring the beads and, as necessary,
removing excess volume.
(a) Write an IVP which describes this situation.
(b) Solve the IVP.
(c) How much (units are liters) of red...
Consider a system of particles in a volume V and in equilibrium with a thermal bath...
Consider a system of particles in a volume V and in
equilibrium with a thermal bath at temperature T.
a) What is the assembly that represents the statistical properties
of the system? Give the name of the assembly and define it.
b) If the microstates of the system are classically described by
the ϕ phases in the Γ space. What is the
probability density p(ϕ) of finding the system in the microstate
phi?
c) Write the appropriate partition function to...
a gas that has a volume of 28 liters a temperature of 95 celsius and an...
a
gas that has a volume of 28 liters a temperature of 95 celsius and
an unknown pressure has its volume increased go 36 liters and its
temperature decreased to 35 celsius. if i measure the pressure
after the change to be 8.5 atm what was the original pressure of
the gas?
A sample of an ideal gas occupies a volume of 25.0 liters at a pressure of...
A sample of an ideal gas occupies a volume of 25.0 liters at a
pressure of 1.20 atm and a temperature of 75 degrees C. How many
moles of gas are present in the container?
P6.3 Marlow Bed and Bath had a beginning inventory of 400 units of Product Kimbo at...
P6.3
Marlow Bed and Bath had a beginning inventory of 400 units of
Product Kimbo at a cost of £8 per unit. During the year, purchases
were :
Feb.20 200 units at £9
May.6 500 units at £10
Aug.12 600 units at £11
Dec.8. 300 units at £12
Marlow uses a periodic inventory system. Sales totaled 1,500
units.
Instructions
Determine the cost of goods available for sale.
Determine (1) the ending inventory and (2) the cost of goods
sold under the...
Calculate the volume, in liters, of 1.656 M KOH that must be added to a 0.125...
Calculate the volume, in liters, of 1.656 M KOH that must be
added to a 0.125 L solution containing 9.44 g of glutamic acid
hydrochloride (H3Glu Cl–, MW = 183.59 g/mol) to achieve a pH of
10.36. Glutamic acid (Glu) is an amino acid with pKa values of pKa1
= 2.23, pKa2 = 4.42, pKa3 = 9.95.
What is the final volume (in Liters) of a 22.4 L system at 273.15 K and...
What is the final volume (in Liters) of a 22.4 L system at
273.15 K and 1.00 atm if STP conditions are established?
What is the final volume (in Liters) of a 22.4 L system at 273.15 K and...
What is the final volume (in Liters) of a 22.4 L system at
273.15 K and 1.00 atm if STP conditions are established?
1.- A balloon is inflated to a volume of 3.2 liters at room temperature (23oC) and...
1.- A balloon is inflated to a volume of 3.2 liters at room
temperature (23oC) and placed into a freezer where the temperature
is 3oC. What is the volume of the balloon when it reaches 3oC, in
liters?.
2.- What is the partial pressure (in atm) of SO3 if
1.11 moles of SO3 are mixed with 3.02 moles of
O2 and the total pressure in the container is 6.84
atm?
3.- A cylinder contains three gases; A, B, and C....
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- Large lots are desirable in supply chain coordination despite increasing holding costs.
- ***Convert the C++ to Python*** #include <iostream> using std::cout; using std::cin; using std::endl; int charClass; char...
- Make-or-Buy Decision Fremont Computer Company has been purchasing carrying cases for its portable computers at a...
- The following costs were incurred for the single product produced during the first year of operations...
- Non-constant growth model: Do=$2.00 required return on equity= 5% g= 9% n=1,2 g=7% n=3,4 g=3% n=5...
- . Find all x ∈ Z143 such that x2Ξ 7 (mod 143). Please explain all steps...
- #Python: A palindrome is a sequence of characters that reads the same backwards as forwards. For...
ADVERTISEMENT