Question

In: Physics

An RLC series circuit has a 2.60 Ω resistor, a 200 µH inductor, and an 82.0...

An RLC series circuit has a 2.60 Ω resistor, a 200 µH inductor, and an 82.0 µF capacitor.

(a) Find the circuit's impedance (in Ω) at 120 Hz.

________Ω

(b) Find the circuit's impedance (in Ω) at 5.00 kHz.

________Ω

(c) If the voltage source has Vrms = 5.60 V, what is Irms (in A) at each frequency?

Irms, 120 Hz= _______A

Irms, 5.00 kHz= _______A

(d) What is the resonant frequency (in kHz) of the circuit?

________kHz

(e) What is Irms (in A) at resonance?

________A

Solutions

Expert Solution


genius_generous answered 8 months ago
Next > < Previous

Related Solutions

An RLC series circuit has a 2.60 ? resistor, a 200 µH inductor, and a 78.0 µF capacitor.
  An RLC series circuit has a 2.60 ? resistor, a 200 µH inductor, and a 78.0 µF capacitor. (a) Find the circuit's impedance (in ?) at 120 Hz. (b) Find the circuit's impedance (in ?) at 5.00 kHz. (c) If the voltage source has Vrms = 5.60 V, what is Irms (in A) at each frequency? Irms, 120 Hz =_____ A Irms, 5.00 kHz =_____A (d) What is the resonant frequency (in kHz) of the circuit? (e) What is...
An RLC series circuit has a 2.50 Ω resistor, a 100 µH inductor, and an 87.5...
An RLC series circuit has a 2.50 Ω resistor, a 100 µH inductor, and an 87.5 µFcapacitor. (a) If the voltage source is Vrms = 5.60 V , what is the Irms at 120 Hz? A ( ± 0.001 A) (b) What is the phase angle of the current vs voltage at this frequency? Enter a positive number between 0 and 90 degrees ( ± 0.1 degrees) (c) What is the Irms at 5.0 kHz? A ( ± 0.01 A)...
An RLC series circuit has a 60 Ω resistor, a 3.5 mH inductor, and a 6...
An RLC series circuit has a 60 Ω resistor, a 3.5 mH inductor, and a 6 μF capacitor. Find the circuit’s impedance at 55 Hz and 12 kHz. If the voltage source has Vrms = 110 V, what is Irms at each frequency?    
An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF capacitor, and a 1.00-H inductor....
An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF capacitor, and a 1.00-H inductor. The circuit is driven by a power source that oscillates at 20.0 Hz and has an ε_rms value of 90.0 V . The power source is switched on at t = 0 and at that instant the emf is at its maximum value. A) Calculate the power supplied at t = 0.0200 s. B) Calculate the power supplied at t = 0.0375 s. C)...
An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF capacitor, and a 1.00-H inductor....
An RLC series circuit consists of a 450-Ω resistor, a 3.00-mF capacitor, and a 1.00-H inductor. The circuit is driven by a power source that oscillates at 20.0 Hz and has an Erms value of 30.0 V . The power source is switched on at t = 0 and at that instant the emf is at its maximum value. Part A Calculate the power supplied at t = 0.0200 s. Part B Calculate the power supplied at t = 0.0375...
A series RLC circuit consists of a 58.0 ? resistor, a 2.50 mH inductor, and a...
A series RLC circuit consists of a 58.0 ? resistor, a 2.50 mH inductor, and a 450 nF capacitor. It is connected to a 3.0 kHz oscillator with a peak voltage of 5.60 V. What is the instantaneous emf E when i = I ? What is the instantaneous emf E when i = 0A and is decreasing? What is the instantaneous emf E when i = - I ?
A series RLC circuit consists of a 56.0 ? resistor, a 3.80 mH inductor, and a...
A series RLC circuit consists of a 56.0 ? resistor, a 3.80 mH inductor, and a 400 nF capacitor. It is connected to a 3.0 kHz oscillator with a peak voltage of 4.10 V. Part A What is the instantaneous emf E when i =I? Express your answer with the appropriate units. 0V SubmitHintsMy AnswersGive UpReview Part Incorrect; Try Again; 5 attempts remaining Part B What is the instantaneous emf E when i =0A and is decreasing? Express your answer...
An RLC series circuit has a 1.00 kΩ resistor, a 160 mH inductor, and a 25.0...
An RLC series circuit has a 1.00 kΩ resistor, a 160 mH inductor, and a 25.0 nF capacitor. (a) Find the circuit's impedance (in Ω) at 490 Hz. 12539.57588 Ω (b) Find the circuit's impedance (in Ω) at 7.50 kHz. 6765.310603 Ω (c) If the voltage source has Vrms = 408 V, what is Irms (in mA) at each frequency? mA (at 490 Hz)   mA (at 7.50 kHz) (d) What is the resonant frequency (in kHz) of the circuit? kHz...
An RLC series circuit has a 1.00 kΩ resistor, a 160 mH inductor, and a 25.0...
An RLC series circuit has a 1.00 kΩ resistor, a 160 mH inductor, and a 25.0 nF capacitor. (a) Find the circuit's impedance (in Ω) at 490 Hz. Ω (b) Find the circuit's impedance (in Ω) at 7.50 kHz. Ω (c) If the voltage source has Vrms = 408 V, what is Irms (in mA) at each frequency? mA (at 490 Hz) mA (at 7.50 kHz) (d) What is the resonant frequency (in kHz) of the circuit? kHz (e) What...
An RLC series circuit has a 180 ? resistor and a 25.0 mH inductor. At 7600 Hz, the phase angle is 45.0°.
  An RLC series circuit has a 180 ? resistor and a 25.0 mH inductor. At 7600 Hz, the phase angle is 45.0°. (a) What is the impedance (in ohms)? ? (b) Find the minimum possible capacitance (in nanofarads) of the circuit.   nf (c) If Vrms = V is applied, what is the average power (in watts) supplied?   W he lowest frequency in the FM radio band is 87.5 MHz. (a) What inductance (in µH) is needed to produce this...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT