Moist air enters a conditioner operating at steady state at 40oC and 60% relative humidity constant...

Moist air enters a conditioner operating at steady state at 40oC and 60% relative humidity constant pressure process at 1 atm from to. The air is first passed over cooling coils and moisture is removed and then is passed over heating coils to achieve the final state of 18oC dry bulb and 10oC wet bulb.

(a) Sketch the process on the psychometric chart and determine

(b) the dew point temperature of the mixture at the inlet of the cooling coils and at the inlet of the heating coils, and

(c) the net heat transfer for the entire process, in kJ/ kg dry air?

Moist air enters an conditioner operating at steady state at 40oC and 60% relative humidity constant pressure process at 1 atm from to. The air is first passed over cooling coils and moisture is removed and then is passed over heating coils to achieve the final state of 18oC dry bulb and 10oC wet bulb. (a) Sketch the process on the psychometric chart and determine (b) the dew point temperature of the mixture at the inlet of the cooling coils and at the inlet of the heating coils, and (c) the net heat transfer for the entire process, in kJ/ kg dry air?

Expert Solution

samet mamat answered 2 years ago

Moist air at 30 °C and 50% relative humidity enters a dehumidifier operating at steady state...

Moist air at 30 °C and 50% relative humidity enters a dehumidifier operating at steady state with a mass flow rate of 319.35 kg/min. The moist air passes over a cooling coil and water vapor condenses. Condensate (condensed water) exits at 10 °C. Saturated moist air exits in a separate stream at the same temperature. The pressure remains constant at 1 bar. Determine (a) the rate at which water is condensed, in kg/min, and (b) the heat transfer rate during...

Outside air at 10 degC, 1 bar and 40% relative humidity enters an air conditioner operating...

Outside air at 10 degC, 1 bar and 40% relative humidity enters an air conditioner operating at steady state with a mass flow rate of 1.5kg/s. The air is first heated at essentially constant pressure to 30 degC. Liquid water at 15 degC is then injected, bringing the air to 25 degC, 1bar. Determine (a) the rate of heat transfer to the air passing through the heating section, in kJ/s. (b) the rate of water is injected, in kg/s. (c)...

Air enters a window air conditioner at 1 atm, 36oC and 75% relative humidity (??) at...

Air enters a window air conditioner at 1 atm, 36oC and 75% relative humidity (??) at a rate of 12m3/min and it leaves as saturated air at 18oC. Part of the moisture in the air which condenses during the process is also removed at 18oC. Determine (a) the rate of heat (Q?) and (b) moisture removal from the air. (c) What-if Scenario: What would the rate of heat removal be if moist air entered the dehumidifier at 95 kPa instead...

Air at 28 °C, 1 bar, 50% relative humidity enters an insulated chamber operating at steady...

Air at 28 °C, 1 bar, 50% relative humidity enters an insulated chamber operating at steady state with a mass flow rate of 5 kg/min and mixes with a saturated moist air stream entering at 4 °C, 1 bar with a mass flow rate of 8 kg/min. A single mixed stream exits at 1 bar. Determine (a) the relative humidity and temperature, in °C, of the exiting stream.

Moist air enters an adiabatic humidifier system at 1 atm, 15 °C, with a relative humidity...

Moist air enters an adiabatic humidifier system at 1 atm, 15 °C, with a relative humidity of 20%. The volumetric flow rate of the incoming moist air is 150 m3/min. Saturated water vapor at 1 atm is injected into the flow such that the outlet temperature is 30 °C and the outlet relative humidity is 40%. The pressure is constant in the humidifier system. Determine the mass flow rate of the saturated water vapor entering the humidifier at state 3,...

An air compressor is operating at a steady state. The air enters at with a volumetric...

An air compressor is operating at a steady state. The air enters at with a volumetric flow rate 1.2 m^3/s at 170 kPa and 22 degrees celsius with negligible velocity and leaves at 1500 kPa with velocity of 200 m/s. The power to the compressor is 60 kW and the compressor is cooled at a rate of 15 kJ/kg. Determine the exit area.

There are 10 m3/s of moist air at 22C and relative humidity of 50% that enter...

There are 10 m3/s of moist air at 22C and relative humidity of 50% that enter a heating element until its temperature becomes 35C. Determine the amount of heat required and the final %Rh of the air.

Air enters a horizontal, constant-diameter heating duct operating at steady state at 280 K, 1 bar,...

Air enters a horizontal, constant-diameter heating duct operating at steady state at 280 K, 1 bar, with a volumetric flow rate of 0.25 m3/s, and exits at 325 K, 0.95 bar. The flow area is 0.05 m2. Assuming the ideal gas model with k = 1.4 for the air, determine: (a) the mass flow rate, in kg/s, (b) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer to the air, in kW

Moist air (RH = 60%) at 80oF enters an Evaporative cooling unit as it enters a...

Moist air (RH = 60%) at 80oF enters an Evaporative cooling unit as it enters a greenhouse and leaves at 100% saturation. How many pounds Water per pound of Air will be required? Select one: a. 0.0155 lbs H2O per lb Air b. 0.002865 lbs H2O per lb Air c. 0.028656 lbs H2O per lb Air d. 0.01315 lbs H2O per lb Air e. 0.002344 lbs H2O per lb Air

Air enters an air conditioning unit at 32oC, 80% relative humidity, and with a mass flowrate...

Air enters an air conditioning unit at 32oC, 80% relative humidity, and with a mass flowrate of 12 kg/min. It is to be conditioned to 25oC and 50% relative humidity. In order to do this, part of the moisture in the air must be removed as condensate at 30oC. Be able to draw the path that the atmospheric air takes on the psychrometric chart. Find a. The rate of moisture removal from the air, mw  b. The rate of...

Question