A fire helicopter carries a 618 kg bucket of water at the end of a 20.6...

A fire helicopter carries a 618 kg bucket of water at the end of a 20.6 m long cable. Flying back from a fire at a constant speed of 38.4 m/s, the cable makes an angle of 35.2o with respect to the vertical. Determine the force of air resistance on the bucket. (In N)

Expert Solution

genius_generous answered 2 years ago

2. A woman carries a large bucket of water to the top of a 40 meter...

2. A woman carries a large bucket of water to the top of a 40 meter tower at a constant upward speed. The bucket has a mass of 10 kg and initially contains 30 kg of water, but it leaks at a constant rate and only 10 kg of water are in the bucket at the top of the tower. Write an expression for the mass of the bucket plus water as a function of the height y climbed. Find...

A woman carries a large bucket of water to the top of a 40 meter tower...

A woman carries a large bucket of water to the top of a 40 meter tower at a constant upward speed. The bucket has a mass of 10 kg and initially contains 30 kg of water, but it leaks at a constant rate and only 10 kg of water are in the bucket at the top of the tower. a) Write an expression for the mass of the bucket plus water as a function of the height y climbed. b)...

A small bucket of water with mass of 2.5 kg is tied to a string with...

A small bucket of water with mass of 2.5 kg is tied to a string with a length 0.68 m, and swung in a vertical circle. The bucket travels at a constant speed 5.8 m/s. When the bucket is at the top of the circle, what is the tension in the string? Report your answer in SI units, rounded to two decimal places.

A bucket of water of mass 16.0 kg is suspended by a rope wrapped around a...

A bucket of water of mass 16.0 kg is suspended by a rope wrapped around a windlass, that is a solid cylinder with diameter 0.320 m with mass 13.0 kg . The cylinder pivots on a frictionless axle through its center. The bucket is released from rest at the top of a well and falls a distance 10.6 m to the water. You can ignore the weight of the rope. What is the tension in the rope while the bucket...

a bucket of water with total mass 20 kg is attached to. a rope, which in...

a bucket of water with total mass 20 kg is attached to. a rope, which in turn wound around a 0.050 m radius cylinder at the top of a well. the bucket is raised to the top of the well and released. the bucket is moving with a speed of 8.0 m/s upon hitting the water surface in the well. calculat the following: a. the torque produced by the falling bucket b. the angular acceleration of the cylinder, if its...

Josh has just raised a 2.5 kg bucket of water using a well 's winch when...

Josh has just raised a 2.5 kg bucket of water using a well 's winch when he accidentally lets go of the handle. The winch consists of a rope wrapped around a 3 kg, 4-cm-diameter cylinder, which rotates on an axle through the center. The bucket is released from rest 4 m above the water level of the well. A) How long does it take to reach the water? B)What is the torque generated due to tension? C) what is...

You accidentally knock a full bucket of water oﬀ the side of the well. The bucket...

You accidentally knock a full bucket of water oﬀ the side of the well. The bucket plunges 15m to the bottom of the well. Attached to the bucket is a light rope that is wrapped around the crank cylinder. The cylinder has a radius of 0.080m and inertia of 4.0kg. Draw a force diagram. (a) How fast is the handle turning when the bucket hits the bottom? (b) How fast is the bucket moving as it hits the bottom? (c)...

) A 1.53-kg bucket hangs on a rope wrapped around a pulley of mass 7.07 kg...

) A 1.53-kg bucket hangs on a rope wrapped around a pulley of mass 7.07 kg and radius 66 cm. This pulley is frictionless in its axle, and has the shape of a solid uniform disk. After the bucket has been released, what is the angular acceleration of the pulley?

A 4 ? edge bucket with a 1.5 ? opening at the right end of the...

A 4 ? edge bucket with a 1.5 ? opening at the right end of the lid contains 48 ?3 of water. If the cube experiences a horizontal acceleration of 14,715 ? / ?2 a) First to the right b) Second, to the left In both cases, determine the volume spilled and the pressure at the midpoint of the base of the bucket.

A 1.50-kg iron horseshoe initially at 550°C is dropped into a bucket containing 18.0 kg of...

A 1.50-kg iron horseshoe initially at 550°C is dropped into a bucket containing 18.0 kg of water at 20.0°C. What is the final temperature of the water–horseshoe system? Ignore the heat capacity of the container and assume a negligible amount of water boils away.

Question