steam given inlet properties. It exits an isentropic turbine with a heat loss of 20 kj...

steam given inlet properties. It exits an isentropic turbine with a heat loss of 20 kj / kg at a pressure of 0.1 mpa. Mass flow of the fluid is 10 kg / h.
fluid :
a)enthalpy at the exit
b)temperature at outlet
c)heat transfer
d)degree of dryness at the outlet
e)work from turbine
calculate
input features
1.6 Mpa . 300 C water

Expert Solution

samet mamat answered 1 hour ago

The mass flow rate of steam through an ideal Rankine turbine ( with an isentropic turbine...

The mass flow rate of steam through an ideal Rankine turbine ( with an isentropic turbine and an isentropic pump) is 30lbm/s. The water and or steam is at a pressure of 1000 psia throughout the boiler and superheater and exits the superheater at a temperature of 600 F. The condenser is at a pressure of 2 psia, and the water exits the condenser as a saturated liquid. Calculate the following. (a) the power output of the turbine (b) the...

The temperature and pressure of the steam at the inlet of a high pressure turbine is...

The temperature and pressure of the steam at the inlet of a high pressure turbine is 500 ° C, respectively. It is 12 MPa and 300 ° C and 3MPa at its outlet. If the mass flow of steam is 400 kg / h, how much is the isentropic efficiency of the turbine?

Steam enters a turbine at a velocity of 200 m/s. The inlet conditions of the steam...

Steam enters a turbine at a velocity of 200 m/s. The inlet conditions of the steam are at 4000 kPA and 500°C. The diameter of the inlet pipe is 50 mm. The outlet conditions of the steam are 80 kPa and a quality of 1.0. The diameter of the outlet pipe is 250 mm. Determine the turbine power output in kJ/s assuming the kinetic energy change and potential energy change are both negligible. Calculate the change in kinetic energy to...

A steam turbine operates with steam at inlet conditions of 3.5 MPa and 3500 C. The...

A steam turbine operates with steam at inlet conditions of 3.5 MPa and 3500 C. The exit stream leave the turbine is at 0.8 MPa and is known to contain a mixture of saturated vapor and liquid. The steam rate through the turbine is 1000 kg/h. A (negligible) fraction of exit stream is bled through a throttle valve to 0.10 MPa and is found to be 1250 C. The measured output of the turbine is 100 kW. a) Determine the...

Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 4 MPa,...

Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 4 MPa, 500°C and 80 m/s, and the exit conditions are 30 kPa, 92% quality and 50 m/s. The mass flowrate of the steam is 12 kg/s. Investigate the effect of the turbine exit pressure on the power output of the turbine. Let the exit pressure vary from 10 to 200 kPa. Plot (1) T2 vs P2 and 2) Plot the power output (W_dot_T in MW)...

Superheated steam enters a turbine at 3 MPa, 550oC, and exits at 0.01 MPa. a) If...

Superheated steam enters a turbine at 3 MPa, 550oC, and exits at 0.01 MPa. a) If the process is reversible adiabatic (isentropic), find the final temperature (T2s), the final enthalpy (h2s) of the steam, and the turbine work (Wt,s). b) What is Sgen for the above process? c) If the isentropic efficiency is 90%, find the actual final temperature (T2a) and calculate Sgen? d) Plot process (a) and (c) on a Ts diagram.

At the inlet of a steam turbine the following information are given: p=1000 kPa, T=500 deg-C,...

At the inlet of a steam turbine the following information are given: p=1000 kPa, T=500 deg-C, u = 3124.3 kJ/kg, v = 0.35411, V=20 m/s, z=10 m, and mdot=10 kg/s. determine the inlet area. Determine the flow work at the inlet in MW Determine the rate of transport of flow energy (Jdot). If you neglect ke and pe in the expression for j, how would the answer in part c change? in percentage

The velocity of steam at inlet to a simple impulse turbine is 1200 m/s and the...

The velocity of steam at inlet to a simple impulse turbine is 1200 m/s and the nozzle angle is 21°. The blade speed is 500 m/s and the blades are symmetrical. Evaluate: The blade angles if the steam is to enter the blades without shock. If the friction effects on the blade are negligible, specify the tangential force on the blades and the diagram power for a mass flow of 0.85 kg/s. What are the axial thrust and the diagram...

Steam expands in a thermally isolated turbine steadily. The inlet pressure is 1MPa and temperature is...

Steam expands in a thermally isolated turbine steadily. The inlet pressure is 1MPa and temperature is 800 C, and the exit state is 300 kPA and 150 C. a- Determine the power generated by the turbine per unit mass flow rate of steam. b- Evaluate the entropy generation rate per unit mass flow rate of steam and drive a conclusion whether the turbine operates reversibly, irreversibly or the operation is impossible.

4. A steam turbine has an inlet flow of 3 kg/s at 3.5 MPa and 450...

4. A steam turbine has an inlet flow of 3 kg/s at 3.5 MPa and 450 C with a velocity of 140 m/s. the exit of the turbine is 800 kPa and 300 C at a very low velocity. Calculate a.) the work produced in (MW) by the turbine, and b.) The entropy generated in (kW/k)

Question