My device is a BOILER Choose the working fluid (substance) for your model device Choose the...

My device is a BOILER

Choose the working fluid (substance) for your model device

Choose the inlet substance conditions such as temperature, pressure, velocity, mass flow rate or volume flow rate, quality, etc

Choose the outlet substance conditions based on the available information, or design the outlet conditions based on your research.

DRAW the system you are analyzing, including the SYSTEM BOUNDARY,

Show ALL INTERACTIONS between the system and surroundings on your drawing

Write the Conservation of mass equation as it applies TO YOUR SYSTEM

Write the Conservation of Energy equation as it applies TO YOUR SYSTEM

List all the assumptions and idealizations for the process

Calculate the thermo efficiency of the device. Be sure clearly shows equations, calculation process, intermediate answers/results,and final results. Units are critically important in all calculations.

Expert Solution

samet mamat answered 3 hours ago

My device is an AIR COMPRESSOR Choose the working fluid (substance) for your model device Choose...

My device is an AIR COMPRESSOR Choose the working fluid (substance) for your model device Choose the inlet substance conditions such as temperature, pressure, velocity, mass flow rate or volume flow rate, quality, etc Choose the outlet substance conditions based on the available information, or design the outlet conditions based on your research. DRAW the system you are analyzing, including the SYSTEM BOUNDARY, Show ALL INTERACTIONS between the system and surroundings on your drawing Write the Conservation of mass equation...

Consider a simple ideal Rankine cycle which uses water as the working fluid. The boiler pressure...

Consider a simple ideal Rankine cycle which uses water as the working fluid. The boiler pressure is 6100 kPa and the condenser pressure is 30 kPa. At the turbine inlet, steam is at 480°C. The isentropic efficiency of the turbine is 92 percent. The pump losses are negligible and the water leaving the condenser is subcooled by 6.3°C. The boiler is sized for a mass flow rate of 20 kg/s. Determine the following values. The temperature at the pump inlet....

3.A simple Rankine cycle uses water as the working fluid. The boiler operates at 6000 kPa...

3.A simple Rankine cycle uses water as the working fluid. The boiler operates at 6000 kPa and the condenser at 50 kPa. At the entrance to the turbine, the temperature is 450°C. The isentropic efficiency of the turbine is 90 percent, pressure and pump losses are negligible, and the water leaving the condenser is subcooled by 6.3°C. The boiler is sized for a mass flow rate of 20 kg/s. Determine (a) the rate at which heat is added in the...

A feedwater heater is a device to heat the feedwater before it goes into the boiler....

A feedwater heater is a device to heat the feedwater before it goes into the boiler. This device receives one stream of saturated vapor at 0.8 MPa and another stream of compressed liquid at 0.8 MPa and 60 oC. These two streams combined to become saturated liquid at 0.8 MPa at the exit of the feedwater heater. The mass flow rate of the compressed liquid is 100 kg/s. Determine a) the mass flow rate of the saturated vapor, b) the...

why would one choose a fire tube boiler instead of a water tube boiler

1. Choose a diagrammatic device such as IS-LM and demonstrate your use of it to show...

1. Choose a diagrammatic device such as IS-LM and demonstrate your use of it to show policy effects.

fluid mosaic model structure

my bacteria is streptococcus pyogenes Choose one species of bacteria on the "Choose Your Bacterium" wiki...

my bacteria is streptococcus pyogenes Choose one species of bacteria on the "Choose Your Bacterium" wiki page. Prepare a wiki addressing all areas shown on the example wiki page. Culture Requirements: Culture Requirements: Media: sheep blood agar supplemented with 5% malted barley extract Atmosphere: 10% oxygen and 20% carbon dioxide Temperature: 30 - 35 oC Biochemical Test Reactions: [include photos of these in your wiki] catalase positive oxidase negative etc. Interesting or Unusual Characteristics: This organism can be found growing...

An ideal refrigeration cycle utilizes R-134a as a working fluid. If the fluid enters the compressor...

An ideal refrigeration cycle utilizes R-134a as a working fluid. If the fluid enters the compressor as saturated vapor at 6 C and enters a throttling valve as a saturated liquid at 1.2MPa. Assuming the mass flow rate of fluid is 1 kg/sec. 1. The heat received by the fluid (kJ) is 2. The heat received by the surroundings (kJ) is 3. The power input to the compressor (kJ) is 4. The coefficient of performance is

Describe the fluid mosaic model for membranes.

Question