Question

In: Statistics and Probability

In a laboratory containing polarographic equipment, six samples of dust were taken at various distances from...

  1. In a laboratory containing polarographic equipment, six samples of dust were taken at various distances from the polarograph and the mercury content of each sample was determined. The following results were obtained.

Distance from the Polarograph, m

1.4

3.8

7.5

10.2

11.7

15.0

Mercury concentration, ng g-1

2.4

2.5

1.3

1.3

0.7

1.2

       

Examine the possibility that the mercury arose from the polarograph.

Solutions

Expert Solution

I had done this using MINITAB as follows-

stat - basic Statistics - 2 sample t test

Here, we have to test,

H0: mu1 -mu2=0 Vs mu1-mu2 <0It gives output as follows-

From above P-value is greater than l.o.s. Thus, reject H0. Hence there is possibility that mercury arose from polarograph.


Related Solutions

In a laboratory containing polarographic equipment, six samples of dust were taken at various distances from...
In a laboratory containing polarographic equipment, six samples of dust were taken at various distances from the polarograph and the mercury content of each sample was determined. The following results were obtained. Distance from the Polarograph, m 1.4 3.8 7.5 10.2 11.7 15.0 Mercury concentration, ng g-1 2.4 2.5 1.3 1.3 0.7 1.2         Examine the possibility that the mercury arose from the polarograph.
Six people had submitted urine samples to the laboratory. The samples were given at the same...
Six people had submitted urine samples to the laboratory. The samples were given at the same time, and the amount of urine was equal in all samples. Your task is to help with the information below about the different test subjects, analyze what each person's urine sample should show. Background information: 1. One person was completely healthy 2. A person suffered from untreated diabetes 3. One person worked in a factory with hot and dry air 4. One person produced...
Twelve samples, each containing five parts, were taken from a process that produces steel rods. The...
Twelve samples, each containing five parts, were taken from a process that produces steel rods. The length of each rod in the samples was determined. The results were tabulated and sample means and ranges were computed. The results were: Sample Sample Mean (in.) Range (in.) 1 10.002 0.011 2 10.002 0.014 3 9.991 0.007 4 10.006 0.022 5 9.997 0.013 6 9.999 0.012 7 10.001 0.008 8 10.005 0.013 9 9.995 0.004 10 10.001 0.011 11 10.001 0.014 12 10.006...
One hundred blood samples were taken from 100 individuals. All of the blood samples were run...
One hundred blood samples were taken from 100 individuals. All of the blood samples were run through two machines to determine if the machines were testing samples appropriately. We expect that both machines should yield similar results. Below are the results of the analysis. Assume there are 100 sample and they are normal. Are the two machines similar? Should we check into whether one machine should be replaced? Show all of your work. Beckman Machine Coulter Machine 3. 4. 5....
Independent random samples, each containing 60 observations, were selected from two populations. The samples from populations...
Independent random samples, each containing 60 observations, were selected from two populations. The samples from populations 1 and 2 produced 37 and 30 successes, respectively. Test H0:(p1−p2)=0 against Ha:(p1−p2)≠0. Use α=0.05. (a) The test statistic is   (b) The P-value is (c) The final conclusion is A. We can reject the null hypothesis that (p1−p2)=0 and conclude that (p1−p2)≠0. B. There is not sufficient evidence to reject the null hypothesis that (p1−p2)=0.
Independent random samples, each containing 60 observations, were selected from two populations. The samples from populations...
Independent random samples, each containing 60 observations, were selected from two populations. The samples from populations 1 and 2 produced 23 and 13 successes, respectively. Test H0:(p1−p2)=0H0:(p1−p2)=0 against Ha:(p1−p2)>0Ha:(p1−p2)>0. Use α=0.03α=0.03 (a) The test statistic is (b) The P-value is
1.Water samples were taken from water used for cooling as it was being discharged from a...
1.Water samples were taken from water used for cooling as it was being discharged from a power plant into a river. It has been determined that as long as the mean temperature of the discharged water is at most 150 F, there will be no negative impact on the river's ecosystem. To investigate whether a plant is in compliance with regulations that prohibit a mean discharge water temperature above 150 F, researchers took 50 water samples at randomly selected times...
Nine samples were taken from 2 streams, four from one and five from the other and...
Nine samples were taken from 2 streams, four from one and five from the other and the following data were obtained. Pollution lever in stream 1: ppm Pollution level in stream 2: ppm 16 9 12 10 14 8 11 6 Someone claimed that the data proved that stream 2 is less polluted than stream 1. Someone else asked the following questions: When were the data collected? Were the data collected all in one day or on different days? Were...
1 point) Independent random samples, each containing 60 observations, were selected from two populations. The samples...
1 point) Independent random samples, each containing 60 observations, were selected from two populations. The samples from populations 1 and 2 produced 33 and 22 successes, respectively. Test H0:(p1−p2)=0 against Ha:(p1−p2)≠0. Use α=0.08. (a) The test statistic is____ (b) The P-value is ____ (c) The final conclusion is A. We can reject the null hypothesis that (p1−p2)=0 and accept that (p1−p2)≠0. B. There is not sufficient evidence to reject the null hypothesis that (p1−p2)=0.
Five samples of size 4 were taken from a process. A range chart was developed that...
Five samples of size 4 were taken from a process. A range chart was developed that had LCLr = 0 and UCLr = 2.50. Similarly, an average chart was developed with the average range from the five samples, with LCLx = 15.0 and UCLX = 24.0. The ranges for each of the five samples were 1.75, 2.42, 2.75, 2.04, and 2.80, respectively. The values of the sample average for each sample were 19.5, 22.3, 17.4, 20.1, and 18.9, respectively. What...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT