Suppose that the weight of an newborn fawn is Uniformly
distributed between 2.4 and 3.5 kg. Suppose that a newborn fawn is
randomly selected. Round answers to 4 decimal places when
possible
. a. The mean of this distribution is
b. The standard deviation is
c. The probability that fawn will weigh exactly 2.9 kg is P(x =
2.9) =
d. The probability that a newborn fawn will be weigh between 2.8
and 3.1 is P(2.8 < x < 3.1)...
a
steam turbine has an inlet flow of 3 kg/s water at 3.5 MPa and
450°C with a velocity of 140 m/s. The exit is at 800 KPa and 300°C
and very low velocity.
(a) How much heat (in MW) is assumed to be transferred into
the turbine?
(b) what is the work that goes into the turbine?
(c) find the work produced by the turbine?
(d) Find the entropy generation of the process.
(e) find the carnot efficiency of...
27. 3.5 kg of water (c=4189 J/(kgxK)) is heated from T1= 14
degrees to T2= 21.5 degrees.
Input an expression for the heat transferred to the water,
Q.
Calculate the value of heat transferred to the water Q in
joules, using the expression from part (a).
To the heated water 0.5 kg of water at T3= 20 degrees is added.
What is the final temperature of the water, in kelvin
If 155 mL of wet H2 is collected over water at 24 ∘C and a
barometric pressure of 739 torr , how many grams of Zn have been
consumed? (The vapor pressure of water is 22.38 torr.)
Suppose 1.16 kg of water at 11.6 ◦C is mixed with 1.7 kg of
water at 81◦C. After equilibrium is reached, the mixture has an
uniform temperature of 52.8517◦C. What is the change in entropy of
the system? The specific heat of water is 4186 J/kg · K. Answer in
units of J/K.
Heat Transfer in a Steel Pan A medium sized steel pan is used to
boil water on top of an electric range. Approximately 85% of the
1000 W produced by the heating unit is transferred nearly uniformly
into the pot during use. Express the most appropriate form of the
heat diffusion equation that describes the heat transfer through
the bottom section of the pan. Include all relevant boundary
conditions. The bottom section of the pan has a thickness of 0.5...
54.0 g aluminum at 50.0oC is dumped into water at 38.5oC. The water warms to 40.0oC.
What is specific heat capacity of aluminum?
a) ____________
What is molar heat capacity of aluminum?
b) ____________
When 10.0 g ammonium nitrate is dissolved in 50.0 g water at 25.0oC, the final temperature of the solution is 20.0oC.
a. What is the q of the water? (SH water = 4.20 J/g K) (10 pt)...
Steam undergoes a state change from 450°C and 3.5 MPa to 150°C
and 0.3 MPa.
Determine ΔH and ΔS using the
following:
a. Steam table data
b. Ideal gas assumptions (be sure to
use the ideal gas heat capacity for water).
(ANS: 0.0717 kJ/kg-K;
-576.8 kJ/kg; 0.143 kJ/kg-K; -555.71 kJ/kg)
A mass of 5 kg of saturated water vapor at 150 kPa is heated at
constant pressure until the temperature reaches 200°C, the the
boundary work in KJ is done by the steam during this process is
closest to?
A cooler contains 1 kg of ice at -5°C. 2 kg of water at 50°C is
added to the cooler. If the cooler does not exchange any heat with
the rest of the world, what is the final temperature of the ice and
water?