Question

In: Civil Engineering

what should be considered in load carrying systems in architecture?

what should be considered in load carrying systems in architecture?

Solutions

Expert Solution

The load carrying systems or the structures in the architectural filed are the one on which the load is imposed. These are the elements that holds the weight of the buildings and there are various considerations that needs to be carried out in order to provide well designed load bearing structures. Below are some points that needs to be considered in the load carrying systems.

  • The foundation provided in these kind of system should be strong enough to bear the load.
  • All the loads and moments should be checked and considered in the architectural design. These load may include live load, dead load and the wind load.
  • The materials used in the construction should be better and be recommended by officials.
  • The reinforcement should be strong enough and in proper design.
  • The design should not be much complex as if the system has to carry high amount of load.

So all the above points should be considered in the architecture for the load carrying systems and it should be assumed that the load imparted ti sufficient enough.

P.S:- If this information is helpful to you then please give an upvote. It will be very kind of you.


Related Solutions

What is the maximum tension (kN) on a cable carrying 2.5 kN/m uniform load if the...
What is the maximum tension (kN) on a cable carrying 2.5 kN/m uniform load if the lowest point of the cable is 40m and 3m away from the one of the support along the horizontal and vertical direction respectively? Round off to 3 decimal places.
What do you mean by due diligence? What factors are considered in carrying out the process...
What do you mean by due diligence? What factors are considered in carrying out the process of due diligence effectively?
10. In what circumstances should a Will revision be considered? What should happen to the original...
10. In what circumstances should a Will revision be considered? What should happen to the original Will? 11. List typical types of non probate assets. 12. Why is an Independent Administration beneficial for estate planning purposes? 13. Under Texas law, define incapacity for legal purposes. 14. What is the purpose of a Statutory Durable Power of Attorney? 15. What is the purpose of a Medical Power of Attorney? 16. Why should we consider signing a Medical Directive?
To increase load carrying capacity of a tube (ID: 40mm, OD: 45mm) it was determined in...
To increase load carrying capacity of a tube (ID: 40mm, OD: 45mm) it was determined in the last minute that it should be reinforced by combining it with a larger tube (ID: 45mm, OD: 50mm) through shrink fitting. Measurement after machining indicated the OD of the inner tube to be 45.012 mm and ID of the outer tube to be 44.950mm. A) Find the maximum torque the assembled tube can carry. B) After assembling, if the composite tube is subjected...
Determine the ultimate load carrying capacity of a group pile in the following scenarios: a) Piles...
Determine the ultimate load carrying capacity of a group pile in the following scenarios: a) Piles are 20 m long, 3 by 3 in plan, square in cross section and to be driven into a granular soil b) Piles are 20 m long, 3 by 3 in plan, square in cross section and to be driven into saturated clay soil c) Provide a reflective comment on your results
: How the presence of water in soil affects the property of soil and its load-carrying...
: How the presence of water in soil affects the property of soil and its load-carrying capacity? Also, mention how the seasonal variation of the water content of soil will affect the settlement characteristics of the foundation?
Design a baseplate for a W24 x 192 column carrying an axial load of Pu =...
Design a baseplate for a W24 x 192 column carrying an axial load of Pu = 2000k and bearing on a 8′ x 8′ concrete footing with f′c = 3ksi (not in mm show work steps by step )
3. Calculate the load carrying capacity and percentage of reinforcement for a short rectangular column of...
3. Calculate the load carrying capacity and percentage of reinforcement for a short rectangular column of cross section dimension 280 mm x 500 mm is reinforced with 4 bars of 25 mm diameter, 2 bars of 20 mm diameter and 2 bars of 12 mm diameter. Use M30 grade concrete and Fe 500 grade steel. Also design a 4 legged ties necessary for this section.
What factors should be considered when investigating variances?
What factors should be considered when investigating variances?
What factors should be considered in selecting a design strategy?
What factors should be considered in selecting a design strategy?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT