Question

In: Physics

A downward force is applied to a wedge with a 40deg tip. The wedge separates two...

A downward force is applied to a wedge with a 40deg tip. The wedge separates two blocks (which have matching 20deg angles, so 40deg included, matching the wedge's profile) which face opposite directions from one another. Behind each block is a compression spring with a solid wall (cannot move) behind it.

What would the free body diagram look like for each block as well as the force balance equation for the system?

thank you!

Solutions

Expert Solution


Related Solutions

1. A force of 99N is applied to a 26kg lawnmower at an downward angle of...
1. A force of 99N is applied to a 26kg lawnmower at an downward angle of 25 degrees relative to the horizontal. There is essentially no friction due to the wheels. Find the acceleration in the x direction 2. A 6 gram bullet is accelerated from rest to a speed of 261 m/s as it travels 79 cm in a gun barrel. Assuming the acceleration to be constant how large was the acceleting force 3. A 15kg box sits on...
A wedge if formed with two thin 20cm pieces of glass. The wedge is 8μm at...
A wedge if formed with two thin 20cm pieces of glass. The wedge is 8μm at its thickest point. The wedge is filled with a liquid with index of refraction n = 1.33. a) When viewed in transmission whats the distance between the corner and the m=7 max b) whats the distances between 2 consecutive bright fringes viewed in reflection c) In the corner likely to be a bright or dark fringe when viewed in transmission d) Draw a diagram...
What is the magnitude F_ad of the downward force on section a?
To understand the concept of tension and the relationship between tension and force.This problem introduces the concept of tension. The example is a rope, oriented vertically, that is being pulled from both ends. (Figure 1) LetFu and Fd (with u for up and d for down) represent the magnitude of the forces acting on the top and bottom of the rope, respectively. Assume that the rope is massless, so that its weight is negligible compared with the tension. (This is...
Two blocks connected by a string are pushed across a horizontalisurface by a force applied to...
Two blocks connected by a string are pushed across a horizontalisurface by a force applied to one of the blocks as, shown in the figure. The coefficient of kinetic friction between the blocks and the surface is 0.20. If, F 20 N and M1.5 kg, what is the tension in the connecting, string?
What is the magnitude and direction of an electric field if it exerts a downward force...
What is the magnitude and direction of an electric field if it exerts a downward force of 10-6N on a charge of -5μC? Could you please explain how to do this question? Thank you
A downward force of 3.7N is exerted on a -5.4μC charge. (a) What is the magnitude...
A downward force of 3.7N is exerted on a -5.4μC charge. (a) What is the magnitude of the electric field at this point? (b) What is the direction of the electric field at this point?
A downward force of 7N is exerted on a -8.2μC charge. What is the magnitude of...
A downward force of 7N is exerted on a -8.2μC charge. What is the magnitude of electric field at this point?
An atomic force microscope consists of a cantilever with a very fine tip on one end....
An atomic force microscope consists of a cantilever with a very fine tip on one end. The lever is driven by a piezoelectric motor allowing the tip to make very fine movements along the surface in order to scan on an atomic scale. As it scans the surface, what is the main frictional force between the tip and the surface? a rolling b static c all three d kinetic
An upward applied force of 10 lbf is applied to a body that has been dropped....
An upward applied force of 10 lbf is applied to a body that has been dropped. Assume the usual value for acceleration due to gravity. If the object weighs 40 lbm, what is the vertical acceleration of the object in ft/s2 ? Draw a free body diagram and label your axes. ANSWER should be between ( 20-25 ft/s2)
Explain the friction applied force graph thoroughly.
Explain the friction applied force graph thoroughly.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT