what is the sequence of operation for a Heat Pump with a 2 stage gas heat?

Expert Solution

Every electrical-mechanical piece of apparatus encompasses a sequence of operation. whereas some makers of heat pumps vary slightly with their setup sequence of operation the sequence of operation for a setup is that the same for many makers. therefore, unless you have got a special style of setup (they square measure out there – the territorial dominion setup is intended for extreme weather condition temperatures up North like Canada) the sequence of operation for your heating instrumentation ought to be terribly like what's represented here. this can be the fundamental operation of a setup such as you can notice in typical heat pumps.

The distinction is fairly basic. A 2-stage setup has two totally different operational stages it will have interaction to supply heating and cooling. It runs a lower-stage most of the time, then activates the secondary stage once most performance is required.

keosha answered 7 months ago

1- write Commissioning, Startup, Operation, and Shutdown procedure of a pump 2- What is the function...

1- write Commissioning, Startup, Operation, and Shutdown procedure of a pump 2- What is the function of shaft sleeve for a centrifugal pump? 3: Discuss the types of pipe reducers for a centrifugal pumping system 4: Write a gate valve mounting procedure 5: Write assembly and dismantling procedure of a rising stem gate valve

What is the difference between a refrigerator and a heat pump? What is the difference between...

What is the difference between a refrigerator and a heat pump? What is the difference between a refrigerator and an air conditioner? Define the coefficient of performance of a refrigerator in words. Can it be greater than unity? Check the specification of refrigerator or air-conditioner at your home. See if you can obtain COP of the machine. A heat pump that is used to heat a house has a COP of 2.5. That is, the heat pump delivers 2.5 kWh...

A heat pump is used to heat a house with an indoor temperature of 21 ◦C....

A heat pump is used to heat a house with an indoor temperature of 21 ◦C. Assume the outdoor temperature is -9 ◦C. What is the maximal energy that could be delivered to the house in one second if the work done on the heat pump is 1500 W (1500 J/s)? (a) 3000 J (b) 3500 J (c) 15.0 kJ (d) 200 J (e) 10.7 kJ

Explain the thermodynamic principle of a geothermal heat pump.

You are installing a heat pump whose COP is half the COP of a reversible heat...

You are installing a heat pump whose COP is half the COP of a reversible heat pump. You plan to use the pump on chilly winter nights to increase the air temperature in your bedroom. Your bedroom's dimensions are 5.35 m ? 3.6 m ? 2.7 m. The air temperature should increase from 63° F to 68° F. The outside temperature is 35° F, and the temperature at the air handler in the room is 112° F. If the pump's...

Consider a residential heat pump that uses lake water as the heat source in the winter...

Consider a residential heat pump that uses lake water as the heat source in the winter and as heat sink inthe summer. The house is to maintained at a winter temperature of T= 18 degrees C and a summer temperature of T= 25 degrees C. To do this efficiently, it is found that the indoor coil should be at T= 50 degrees C in the winter and T= 5 degrees C in the summer. The outdoor coil temperature can be...

A Carnot heat pump moves heat to a warm house at 24°C at a rate of...

A Carnot heat pump moves heat to a warm house at 24°C at a rate of 300kW. The heat is pumped from the outside air at 7°C. What is the power required by the heat pump? What is the rate of change of entropy for each of the thermal reservoirs (the house, and the outside air)? Does this heat pump satisfy the second law of thermodynamics increase of entropy principle?

What is the maximum coefficient of performance for a heat pump if you live somewhere where...

What is the maximum coefficient of performance for a heat pump if you live somewhere where the outdoor winter temperatures are -15°C and you want the inside of your house to be 23°C? If you put 1500 W of power over two hours into the heat pump, what is the maximum amount of heat you can get out of it? Find the work required if the outside temperature is 2°C and use this data to find out if heat pumps...

Gas Heated Homes Central Electric Heat Pump 86 78 86 84 78 83 82 87 80...

Gas Heated Homes Central Electric Heat Pump 86 78 86 84 78 83 82 87 80 86 72 92 82 63 89 At α= .05, test to see if there is a significant difference among the average bills of all the homes (in a city) using three forms of heating. Use both the critical and p-value approaches. Be sure to include your hypotheses, critical values, results, and conclusions in the language of the problem.

An irreversible heat pump heats a home on a cold winter’s day. The home loses heat...

An irreversible heat pump heats a home on a cold winter’s day. The home loses heat to the outdoors at a rate of Q̇ = B (Tin − Tout), where B is a constant equal to 0.5 [kW/K]. The coefficient of performance (COP) of irreversible heat pump is 50% of that for a reversible heat pump (i.e., β ′ = 0.5 β ′ rev ). If the indoor temperature is to be maintained at 20 °C and the power input...

Question