Question

In: Mechanical Engineering

A steam turbine receives 8 kg/s of steam at 9 MPa, 650 C and 60 m/s...

A steam turbine receives 8 kg/s of steam at 9 MPa, 650 C and 60 m/s (pressure, temperature and velocity). It discharges liquid-vapor mixture with a quality of 0.94 at a pressure of 325 kPa and a velocity of 15 m/s. In addition, there is heat transfer from the turbine to the surroundings for 560 kW. Find the power produced by the turbine and express it in kW

Solutions

Expert Solution

samet mamat answered 3 hours ago
Next > < Previous

Related Solutions

A steam turbine receives superheated steam at 18.0 kg/s, 500.°C, and 3.00 MPa and exhausts it...
A steam turbine receives superheated steam at 18.0 kg/s, 500.°C, and 3.00 MPa and exhausts it to 10 kPa with a quality of 96%. If the turbine is assumed to be internally reversible, determine the rate of heat loss from the turbine surface if the power output is 20.MW The surface temperature of the turbine is uniform at 350.°C, and the local environment (ground state) is taken to be saturated liquid water at T0 = 20.0°C. Neglect all flow stream...
An adiabatic steam turbine receives 50 kg/s of superheated steam at 5 MPa and 500oC. Steam...
An adiabatic steam turbine receives 50 kg/s of superheated steam at 5 MPa and 500oC. Steam exits the turbine with a pressure of 100 kPa. Determine the minimum exit quality and the maximum power output of the turbine in kW.
A steam turbine receives steam from two boilers. One flow is 5 kg/s at 3 MPa,...
A steam turbine receives steam from two boilers. One flow is 5 kg/s at 3 MPa, 700°C and the other flow is 15 kg/s at 800 kPa, 500°C. The exit state is 10 kPa, with a quality of 96%. Calculate the efficiency of the turbine and the total power output.
A steam turbine receives steam from two boilers. One flow is 5 kg/s at 3 MPa,...
A steam turbine receives steam from two boilers. One flow is 5 kg/s at 3 MPa, 700°C and the other flow is 15 kg/s at 800 kPa, 500°C. The exit state is 10 kPa, with a quality of 96%. Find the total power out of the adiabatic turbine. Calculate the efficiency of the turbine
a steam turbine has an inlet flow of 3 kg/s water at 3.5 MPa and 450°C...
a steam turbine has an inlet flow of 3 kg/s water at 3.5 MPa and 450°C with a velocity of 140 m/s. The exit is at 800 KPa and 300°C and very low velocity. (a) How much heat (in MW) is assumed to be transferred into the turbine? (b) what is the work that goes into the turbine? (c) find the work produced by the turbine? (d) Find the entropy generation of the process. (e) find the carnot efficiency of...
2 kg/s of steam enters a turbine operating at steady state at 1 MPa, 200oC and...
2 kg/s of steam enters a turbine operating at steady state at 1 MPa, 200oC and exits at 40oC with a quality of 83%. Stray heat transfer and kinetic and potential energy effects are negligible. Determine (a) the power developed by the turbine, in kW, (b) the change in specific entropy from inlet to exit, in kJ/kg·K.
4. A steam turbine has an inlet flow of 3 kg/s at 3.5 MPa and 450...
4. A steam turbine has an inlet flow of 3 kg/s at 3.5 MPa and 450 C with a velocity of 140 m/s. the exit of the turbine is 800 kPa and 300 C at a very low velocity. Calculate a.) the work produced in (MW) by the turbine, and b.) The entropy generated in (kW/k)
A steam turbine operates with steam at inlet conditions of 3.5 MPa and 3500 C. The...
A steam turbine operates with steam at inlet conditions of 3.5 MPa and 3500 C. The exit stream leave the turbine is at 0.8 MPa and is known to contain a mixture of saturated vapor and liquid. The steam rate through the turbine is 1000 kg/h. A (negligible) fraction of exit stream is bled through a throttle valve to 0.10 MPa and is found to be 1250 C. The measured output of the turbine is 100 kW. a) Determine the...
Steam enters a turbine at 10 MPa, 410oC, and 80 m/s, and leaves at 10 kPa,...
Steam enters a turbine at 10 MPa, 410oC, and 80 m/s, and leaves at 10 kPa, 90 percent quality and 50 m/s. Steam flows steadily through the turbine at 10 kg/s and the heat loss from the turbine is 0.5 kW. Neglecting potential energy changes, determine The power output of the turbine (kW) The turbine inlet area (m2) The turbine outlet area (m2) The volume flow rate of steam at turbine outlet (m3/s)
1. A steam turbine operates adiabatically with a steam rate of 25 kg/s. The steam is...
1. A steam turbine operates adiabatically with a steam rate of 25 kg/s. The steam is supplied at 300 kPA and 400 oC and discharged at 40 kPA and 100 oC. Use steam tables to solve this problem. a. Determine the power output of the turbine. b. Determine the power output of turbine for reversible process.
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT