Question

In: Physics

How much moisture per pound of dry air is removed by air entering moist grain at...

How much moisture per pound of dry air is removed by air entering moist grain at 110 degrees F dry bulb temperature and exiting the grain at 90% RH and 68 degrees F wet bulb?

Solutions

Expert Solution

Humidity ratio:

Humidity Ratio is defined as the mass of water vapour to the mass of dry air. It is generally used to calculate the moisture content of air in order to improve its properties. If the humidity ratio is equal to 0, it means the air is dry.

genius_generous answered 2 years ago
Next > < Previous

Related Solutions

Show that the density of moist air is less than that of dry air both at...
Show that the density of moist air is less than that of dry air both at the same temperature and pressure. Does this difference between the densities of moist air and dry air, for given pressure and temperautre have any relevance to atmospheric processes?
0.2 kg/s of moist air at 45oC (DBT) and Humidity ratio 0.006 kgw/kgda (dry air) is...
0.2 kg/s of moist air at 45oC (DBT) and Humidity ratio 0.006 kgw/kgda (dry air) is mixed with 0.3 kg/s of moist air at 250C (DBT) and a humidity ratio of 0.018 kgw/kg da in an adiabatic mixing chamber. After mixing, the mixed air is heated to a final temperature of 40o C using a heater. Assume the barometric pressure to be 1 atm. Find Enthalpies of both fluids Temperature and humidity ratio of air after mixing. Heat transfer rate...
Moist air at 55 oF dry bulb temperature and 40% relative humidity is first heated through...
Moist air at 55 oF dry bulb temperature and 40% relative humidity is first heated through a heating coil. The air is then adiabatically humidified by saturated water vapor at 4.5 psia. The exit air has a dry bulb temperature of 90 oF and wet bulb temperature 65 oF. Air is supplied at a volume flow rate of 478.5 cfm. Assume sea level pressure throughout. Determine the following. a) Show the inlet and outlet air condition clearly on the psychrometric...
Air entering a dryer has a temperature (dry bulb) of 60°C and a dew point of...
Air entering a dryer has a temperature (dry bulb) of 60°C and a dew point of 26.7°C. Using the humidity chart, determine the actual humidity H, percentage humidity HP, humid heat cS and humid volume vH.
Dry thermometer temperature of 65.6C , air entering a dryer Its dot is 15.6ºC. Using the...
Dry thermometer temperature of 65.6C , air entering a dryer Its dot is 15.6ºC. Using the humidity chart, the humidity value of the air (kgH2O / kg k.air) and percent humidity (%). The volume of moist air (ısı) and heat Find the capacity (????) values. Results must be in the SI unit system.
0.025 of moist air at 18°C dry-bulb and 10°c wet-bulb temperatures mixes with 0.005 kg/s of...
0.025 of moist air at 18°C dry-bulb and 10°c wet-bulb temperatures mixes with 0.005 kg/s of air at 38°C and 29°c wet-bulb. What is the mixture dry-bulb temperature, humidity ratio, relative humidity, and dew point? What are these parameters if the second stream flow rate is increased to 0.01 kg/s?
Describe the physical process for how precipitation forms in non-tropical regions. Start with warm moist air...
Describe the physical process for how precipitation forms in non-tropical regions. Start with warm moist air rising. Also, describe the three different mechanisms that foster the formation of precipitation. please help me answer this question.
How much energy must be removed to convert 9.73 g of water at 20.9 oC to...
How much energy must be removed to convert 9.73 g of water at 20.9 oC to an ice cube at -12.0 oC? Give your answer as a positive value in Joules since only positive energy can be removed.. cwater = 4.184 J/goC, cice = 2.03 J/goC, ΔHfus, water = 6.01 kJ/mol
How much energy must be removed from a 125 g sample of benzene (C6H6) vapor at...
How much energy must be removed from a 125 g sample of benzene (C6H6) vapor at 425.0 K to make it a solid at 200.0 K? Use the following steps to get to your answer. You MUST show your work to receive any credit. The following physical data for benzene may be useful. The quiz will be due at the beginning of class on 2/17/16. ΔHvap = 33.9 kJ/mol ΔHfus = 9.8 kJ/mol Cliq = 1.73 J/g°C Cgas = c...
How much energy must be removed from a 125 g sample of benzene (C6H6) vapor at...
How much energy must be removed from a 125 g sample of benzene (C6H6) vapor at 425.0 K to make it a solid at 200.0 K? Use the following steps to get to your answer. You MUST show your work to receive any credit. The following physical data for benzene may be useful. The quiz will be due at the beginning of class on 2/17/16. ΔHvap = 33.9 kJ/mol ΔHfus = 9.8 kJ/mol Cliq = 1.73 J/g°C Cgas = c...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT