A four-pole dc machine has a simplex-wave winding of 250 turns. The flux per pole is...

A four-pole dc machine has a simplex-wave winding of 250 turns. The flux per pole is 0.7 T. The armature radius is 15 cm and effective conductor length is 20 cm. The pole covers 80 % of the armature periphery. The machine rotates at 1000 rpm.
1. Determine the machine constant (see sec. 4.2.4 of the text book).

2. Determine the generated voltage.

3. Determine the kW rating if the rated current through a single-turn is 120 A.

4. The machine developed torque

Expert Solution

if any query, post in comment below

appreciate the work with upvote

Manojponduru answered 3 months ago

current transformer with a bar primary has 250 turns in it secondary winding. the resistance and...

current transformer with a bar primary has 250 turns in it secondary winding. the resistance and reactance of the secondary circuit are 1.4 ohms and 1.1 ohms respectively including the transformer winding. when 5A current flows in the secondary winding, the magnetism mmf is 80 AT and iron lost is 1.1w. determine the following (i) ratio error (ii) phase angle error

assuming n=m=1 A 230+m V, series DC motor has a field winding of 35+m turns per...

assuming n=m=1 A 230+m V, series DC motor has a field winding of 35+m turns per pole, Its armature resistance is 0.09+.01*m ohm and field resistance is 0.06+0.01*m ohm. The magnetization curve expressed in terms of magneto motive force verses EA at 850+n rpm is given below by the following table. Rated current is 70+m A. Rotational loss is 50+m Watt. Find Motor’s torque, Speed and output power at 90% of full load armature current. EA V 95 150 188...

A 3-phase, 5 kVA, 208 V, four-pole, 60 Hz, Y-connected synchronous machine has negligible stator winding...

A 3-phase, 5 kVA, 208 V, four-pole, 60 Hz, Y-connected synchronous machine has negligible stator winding resistance and a synchronous reactance of 8 per phase at rated terminal voltage. Themachine is operated as a generator and delivers rated kVA at 0.8 power factor lagging. (a) Determine the excitation voltage, (b) Find the power angle, (c) Draw the phasor diagram, (d) Find the stator current assuming that the field excitation current is now increased by 20 % (without changing the prime...

An ideal transformer has 50 turns in its primary and 250 turns in its secondary. 12...

An ideal transformer has 50 turns in its primary and 250 turns in its secondary. 12 V ac is connected to the primary. Find: a. The voltage ac available at the secondary. b. Current in the 10 ohms device connected to the secondary. c. Power supplied to the primary. d. Power supplied to the secondary.

Problem 5) A long shunt 600 V, 1200-rpm DC motor has a series field winding resistance...

Problem 5) A long shunt 600 V, 1200-rpm DC motor has a series field winding resistance of 0.05 Ω, a shunt field winding resistance of 200 Ω, and an armature resistance of 0.1 Ω. The machine is connected to 600 V DC source. The rotational loss is 3.2 kW. If the machine draws a 100 A from the supply, calculate a. Back EMF b. Determine the machine’s converted power (or developed power) and its efficiency. c. Determine the speed regulation...

A 440 V 4-pole 3 phase 50 Hz slip ring induction motor has its stator winding...

A 440 V 4-pole 3 phase 50 Hz slip ring induction motor has its stator winding mesh connected and its rotor winding star connected. The standstill voltage measured between slip rings with the rotor open –circuited is 218 V. the stator resistance per phase is 0.6Ω and the stator reactance per phase is 3Ω. The rotor resistance per phase is 0.05Ω and the rotor reactance per phase is 0.25Ω. Calculate the maximum torque and the slip at which it occurs....

The constant-speed magnetization curve for a 25-kW, 250-V dc machine at a speed of 1200 r/min...

The constant-speed magnetization curve for a 25-kW, 250-V dc machine at a speed of 1200 r/min is shown in figure below. This machine is separately excited and has an armature resistance of 0.14 Ω. This machine is to be operated as a dc generator while driven from a synchronous motor at constant speed. a. What is the rated armature current of this machine? b. With the generator speed held at 1200 r/min and if the armature current is limited to...

A 3-phase, 5 kVA, 208 V, 4-pole, 60 Hz, star-connected synchronous generator has negligible stator winding...

A 3-phase, 5 kVA, 208 V, 4-pole, 60 Hz, star-connected synchronous generator has negligible stator winding resistance and a synchronous reactance of 8 Ω per phase at the rated terminal voltage. The generator is connected in parallel to a 3-phase, 208 V, 60 Hz infinite bus. All losses may be neglected. a) Determine the excitation voltage and the power angle when the machine is delivering rated apparent power at 0.8 PF lagging. b) If the field excitation is increased by...

A 230 V, 250 rpm, 100 A separately excited dc motor has an armature resistance of...

A 230 V, 250 rpm, 100 A separately excited dc motor has an armature resistance of 0.5 Ω. The motor is connected to 230 V dc supply and rated dc voltage is applied the field winding. It is driving a load whose torque-speed characteristic is given by TL = 500 − 10ω where ω is the speed in rad/sec and TL is the load torque in N-m. Find (a) the steady state speed at which the motor will drive the...

1. An EM wave has a maximum electric field of 250 V / m. Determine the...

1. An EM wave has a maximum electric field of 250 V / m. Determine the average intensity of the wave. a. 120 W/m^2 b. 0.66 W/m^2 c. 170 W/m^2 d. 83 W/m^2 e. 0.89 W/m^2 2. The various colors of visible light differ in: a. frequency and wavelength b. frequency and its speed in a vacuum c. only in wavelength d. only in frequency e. its speed in a vacuum 3. Determine which of the following types of waves...

Question