Three blocks of mass ?1=?2=?3=1?? are stacked on a table as shown. The surfaces of the...

Three blocks of mass ?1=?2=?3=1?? are stacked on a table as shown. The surfaces of the blocks and table are coated with Teflon and all have the same small coefficient of friction, ??=??=0.01. A force of 30N is applied straight down on the top mass as shown.

a) Draw a free body diagram for each mass labelling all forces.

b) Which direction might the bottom mass move and why?

c) What is the acceleration of the top mass?

Expert Solution

genius_generous answered 3 months ago

Three blocks, each made of different materials, are going to be stacked on top of each...

Three blocks, each made of different materials, are going to be stacked on top of each other. One block is made of brass, another is made of iron, and a third is made of lead. Each block is a perfect cube: 1 m x 1 m x 1 m. Sam is worried about the weight of the blocks compressing each other. a. Come up with an algebraic equation for the total change in height for the stack of blocks (in...

Three identical blocks, A, B, and C, are on a horizontal frictionless table. The blocks are...

Three identical blocks, A, B, and C, are on a horizontal frictionless table. The blocks are connected by strings of negligible mass, with block B between the other two blocks. If block C is pulled horizontally by a force of magnitude F = 49 N, find the tension in the string between blocks B and C.

QUESTION 1 Two blocks are positioned on surfaces, each inclined at the same angle of 41.1...

QUESTION 1 Two blocks are positioned on surfaces, each inclined at the same angle of 41.1 degrees with respect to the horizontal. The blocks are connected by a rope which rests on a frictionless pulley at the top of the inclines as shown, so the blocks can slide together. The mass of the black block is 5.90 kg, and the coefficient of kinetic friction for both blocks and inclines is 0.200. Assume static friction has been overcome and that everything...

Table 1: Mass Data Mass (g) Trial 1 Trial 2 Trial 3 Water 48.0 g 48.5...

Table 1: Mass Data Mass (g) Trial 1 Trial 2 Trial 3 Water 48.0 g 48.5 g 48.3 g Metal Strip 36.9 g 37.0 g 37.2 g Table 2: Specific Heat Data Time (minutes) Temperature (°C) Trial 1 Trial 2 Trial 3 Initial 35.1 C 35.6 C 35.6 C 5 minutes 35.3 C 36.4 C 35.8 C 6 minutes 35.0 C 36.0 C 35.4 C 7 minutes 34.6 C 35.7 C 35.4 C 8 minutes 34.6 C 35.5 C 35.3...

Table 1: Mass Data Mass (g) Trial 1 Trial 2 Trial 3 Water 49.7 50.6 50.2...

Table 1: Mass Data Mass (g) Trial 1 Trial 2 Trial 3 Water 49.7 50.6 50.2 Metal Strip 17.9 18 18 Table 2: Specific Heat Data Time (minutes) Temperature (°C) Trial 1 Trial 2 Trial 3 Initial 23.9 23.5 25.4 5 minutes 25.7 25.5 27.6 6 minutes 25.7 25.4 27.6 7 minutes 25.6 25.4 27.5 8 minutes 25.6 25.4 27.5 9 minutes 25.6 25.4 27.4 10 minutes 25.5 25.4 27.4 T 1.6 2.0 2.0 Based on the data in the...

Three blocks of unknown mass m1, m2=2.0 kg, and m3 = 3.0 kg are on a frictionless horizontal surface as shown on the figure below.

Three blocks of unknown mass m1, m2=2.0 kg, and m3 = 3.0 kg are on a frictionless horizontal surface as shown on the figure below. The blocks are connected by ideal, massless strings. A force FL=11 N is applied to the left block and is directed to the left. A force FR=33 N is applied to the right block, and is directed to the right. The tension T12 in the string between m1 and m2 is 13 N and the...

1) what are the 3 building blocks of process costing? 2) What are equivalent units? 3)...

1) what are the 3 building blocks of process costing? 2) What are equivalent units? 3) What is FIFO? 4) How does FIFO and the weighted average differ? 5) what are the 5 steps in process costing? 6) What are transfer in cost? 7) Conversion costs consist of what? 8) Conversion cost are usually incurred _________ throughout production. 9) Most companies use a __________which summarizes the 5-step procedure.

Three different blocks of Al, Cu, and Fe, each of them with a mass of 8.5...

Three different blocks of Al, Cu, and Fe, each of them with a mass of 8.5 g, 4) absorb 0.845 kJ of heat at 25°C. The specific heats of Al, Cu, and Fe are 0.900 J/g·°C, 0.385J/g·°C, and 0.444 J/g·°C, respectively. a) Which block reaches the highest temperature? b) What is that temperature (in oC)?

Three capacitors are arranged as shown as a portion of a complete circuit. ?2 and ?3...

Three capacitors are arranged as shown as a portion of a complete circuit. ?2 and ?3 are wired in parallel, and then the system of (?2 + ?3) is wired in series to capacitor ?1. The capacitances of each capacitor are ?1 = 5.1 ??, ?2 = 4.8 ??, and C3= 6.2 ??. There is an unknown potential difference between points a and b. a. What is the equivalent capacitance of the system? b. If the charge on ?2 is...

Three odd-shaped blocks of chocolate have the following masses and center-of-mass coordinates: (1) 0.310 kg ,...

Three odd-shaped blocks of chocolate have the following masses and center-of-mass coordinates: (1) 0.310 kg , ( 0.200 m , 0.310 m ); (2) 0.410 kg , ( 0.110 m , -0.380 m );(3) 0.210 kg , ( -0.290 m , 0.630 m ). Part A Find the x-coordinate of the center of mass of the system of three chocolate blocks. Part B Find the y-coordinate of the center of mass of the system of three chocolate blocks.

Question