Question

A number of security devices can be placed at appropriate places in the network architecture to address certain level of security. In reference to this context, explain how a switch can be configured to monitor traffic flowing along its ports.

Above lines are question for 5 marks, they haven't given any other info. Thats the whole info please if you guys can solve help me.

Answer 1

Explain how a switch can be configured to monitor traffic flowing along its ports ?

First we should know, what is Switch ?

What Is a Switch?

You should know that there is another network device used to link networks, called a router. There are major differences in the ways that bridges and routers work, and they both have advantages and disadvantages, as described in Routers or Bridges?. Very briefly, bridges move frames between Ethernet segments based on Ethernet addresses with little or no configuration of the bridge required. Routers move packets between networks based on high-level protocol addresses, and each network being linked must be configured into the router. However, both bridges and routers are used to build larger networks, and both devices are called switches in the marketplace. While the 802.1D standard provides the specifications for bridging local area network frames between ports of a switch, and for a few other aspects of basic bridge operation, the standard is also careful to avoid specifying issues like bridge or switch performance or how switches should be built. Instead, vendors compete with one another to provide switches at multiple price points and with multiple levels of performance and capabilities.

Switch can be configured to monitor traffic flowing along its ports -

Once the switch has built a database of addresses, it has all the information it needs to filter and forward traffic selectively. While the switch is learning addresses, it is also checking each frame to make a packet forwarding decision based on the destination address in the frame. Let’s look at how the forwarding decision works in a switch equipped with eight ports, as shown in Figure 1-2.

Assume that a frame is sent from station 15 to station 20. Since the frame is sent by station 15, the switch reads the frame in on port 6 and uses its address database to determine which of its ports is associated with the destination address in this frame. Here, the destination address corresponds to station 20, and the address database shows that to reach station 20, the frame must be sent out port 2. Each port in the switch has the ability to hold frames in memory, before transmitting them onto the Ethernet cable connected to the port. For example, if the port is already busy transmitting when a frame arrives for transmission, then the frame can be held for the short time it takes for the port to complete transmitting the previous frame. To transmit the frame, the switch places the frame into the packet switching queue for transmission on port 2.

During this process, a switch transmitting an Ethernet frame from one port to another makes no changes to the data, addresses, or other fields of the basic Ethernet frame. Using our example, the frame is transmitted intact on port 2 exactly as it was received on port 6. Therefore, the operation of the switch is transparent to all stations on the network. Note that the switch will not forward a frame destined for a station that is in the forwarding database onto a port unless that port is connected to the target destination. In other words, traffic destined for a device on a given port will only be sent to that port; no other ports will see the traffic intended for that device. This switching logic keeps traffic isolated to only those Ethernet cables, or segments, needed to receive the frame from the sender and transmit that frame to the destination device.

This prevents the flow of unnecessary traffic on other segments of the network system, which is a major advantage of a switch. This is in contrast to the early Ethernet system, where traffic from any station was seen by all other stations, whether they wanted the data or not. Switch traffic filtering reduces the traffic load carried by the set of Ethernet cables connected to the switch, thereby making more efficient use of the network bandwidth.