1. If 55.1 cm of copper wire (diameter = 1.18 mm, resistivity = 1.69 × 10-8Ω·m)...

1. If 55.1 cm of copper wire (diameter = 1.18 mm, resistivity = 1.69 × 10^-8Ω·m) is formed into a circular loop and placed perpendicular to a uniform magnetic field that is increasing at the constant rate of 12.6 mT/s, at what rate is thermal energy generated in the loop?

2. A rectangular loop (area = 2.7 m²) turns in a uniform magnetic field, B = 3.2 T. When the angle between the field and the normal to the plane of the loop is π/2 rad and increasing at 2.6 rad/s, what emf is induced in the loop?

Expert Solution

genius_generous answered 4 months ago

If 47.0 cm of copper wire (diameter = 1.00 mm) is formed into a circular loop...

If 47.0 cm of copper wire (diameter = 1.00 mm) is formed into a circular loop and placed perpendicular to a uniform magnetic field that is increasing at a constant rate of 10.5mT/s, at what rate is thermal energy generated in the loop? _______________ W

A 0.500 mm diameter copper wire makes up a 136 turns, 7.60 cm diameter coil. There...

A 0.500 mm diameter copper wire makes up a 136 turns, 7.60 cm diameter coil. There is a magnetic field parallel to the axis of the coil. If the induced current in the coil is 2.80 A, what is the rate of change of the magnetic field? a) 0.0839 T/s b) 3.63×10-6 T/s c) 12.8 T/s d) 1.74×103 T/s

A 2.0 mm -diameter, 50 cm -long copper wire carries a 4.5 A current. What is...

A 2.0 mm -diameter, 50 cm -long copper wire carries a 4.5 A current. What is the potential difference between the ends of the wire?

A 33 cm diameter coil consists of 19 turns of cylindrical copper wire 2.8 mm in...

A 33 cm diameter coil consists of 19 turns of cylindrical copper wire 2.8 mm in diameter. A uniform magnetic field, perpendicular to the plane of the coil, changes at a rate of 9.50

What is the resistance of a 2.9-m length of copper wire 1.4 mm in diameter?

What is the resistance of a 2.9-m length of copper wire 1.4 mm in diameter? The resistivity of copper is 1.68×10-8Ω⋅m.

A copper wire with diameter of 1,5 mm and length of 4m carries constant current of...

A copper wire with diameter of 1,5 mm and length of 4m carries constant current of 1.75 A. The free electron density in the wire is 8,5x1028 m-3. The resistivity of copper is 1,72x10-8 .m. Calculate a) current density, b)drift velocity, c) magnitude of electric field, d) potential between the terminals of wire, e)power dissipated as heat f) mean free time. (mass of electron: 9,1x10-31kg, magnitude of charge of electron: 1,6x10-19 C)

A number 14 copper wire has a diameter of 1.628 mm. Calculate the resistance of a...

A number 14 copper wire has a diameter of 1.628 mm. Calculate the resistance of a 34.0 m long piece of such wire. (Use 1.72×10-8 Ωm for the resistivity of copper.) 2.809×10-1 Ohm For safety, the National Electrical Code limits the allowable amount of current which such a wire may carry. When used in indoor wiring, the limit is 15.0 A for rubber insulated wire of that size. How much power would be dissipated in the wire of the above...

A copper wire has a diameter of 3.247 mm. What magnitude of current flows when the...

A copper wire has a diameter of 3.247 mm. What magnitude of current flows when the drift velocity is 4.40 mm/s? Take the density of copper to be 8.92 g/cm3. Give your answer in Amperes. PLEASE PLEASE PLEASE answer correctly

A length of 20-gauge copper wire (of diameter 0.8118 mm) is formed into a circular loop...

A length of 20-gauge copper wire (of diameter 0.8118 mm) is formed into a circular loop with a radius of 24.0 cm. A magnetic field perpendicular to the plane of the loop increases from zero to 18.0 mT in 0.20 s. Find the average electrical power dissipated in the process.

A copper pipe of diameter 3.5 cm and wall thickness 4 mm is used in an...

A copper pipe of diameter 3.5 cm and wall thickness 4 mm is used in an antibiotic factory to convey hot water a distance of 60 m at a flow rate of 20 L/s. The inlet temperature of the water is 90°C. Due to heat losses to the atmosphere, the outlet water temperature is 84°C. The ambient temperature is 25°C. The inside of the pipe is covered with a layer of fouling with a fouling factor of 7500 W/m2°C. What...

Question