Question

In: Physics

In a machine that temperature changes from 20 ∘C up to 120 ∘C a tungsten wire...

In a machine that temperature changes from 20 ∘C up to 120 ∘C a tungsten wire filament 13.0 cm long with a diameter of 1.20 mm will be used. The wire will carry  11.0 A at all temperatures ( Resistivity of tungsten at 20 ∘C is 5.25×10^−8Ω⋅m , the temperature coefficient of resistivity at 20 ∘C is 0.0045 ∘C^−1 ).

A-)Calculate the maximum electric field in this filament?

B-)Calculate the resistance of the filament  with that field?

C-)Calculate the maximum potential drop over the full length of the filament?

Solutions

Expert Solution


Related Solutions

In a machine that temperature changes from 20 ∘C∘C up to 120 ∘C∘C a tungsten wire...
In a machine that temperature changes from 20 ∘C∘C up to 120 ∘C∘C a tungsten wire filament 15.0 cmcm  long with a diameter of 1.30 mmmm  will be used. The wire will carry  14.0 AA   at all temperatures ( Resistivity of tungsten at 20 ∘C∘C is 5.25×10−8Ω⋅m5.25×10−8Ω⋅m , the temperature coefficient of resistivity at 20 ∘C∘C is 0.0045 ∘C−1∘C−1 ) Calculate the maximum electric field in this filament? Calculate the resistance of the filament  with that field? Calculate the maximum potential drop over the...
Consider the blackbody radiation emitted at a temperature of 500◦C. (i) Explain why a tungsten wire...
Consider the blackbody radiation emitted at a temperature of 500◦C. (i) Explain why a tungsten wire in an old-fashioned light-bulb starts to glow as it becomes sufficiently hot. (ii) Calculate the percentage pressure increase of the blackbody radiation if the temperature is raised to 550◦C. An electron escapes the hot tungsten wire and is subsequently trapped in a one-dimensional square quantum well. The potential outside the well can be approximated as infinite. (iii) Sketch the probability distribution of the electron...
The resistance R of a tungsten wire as a function of temperature can be modeled with...
The resistance R of a tungsten wire as a function of temperature can be modeled with the equation R=R0*[1+α(T-T0 ) whereR0 is the resistance corresponding to temperature T0, and α is the temperaturecoefficient of resistance. Determine R0and α such that the equation will best fit the following data (Use linear regression curve fitting). Take T0 = 20°C. T=[20 100 180 260 340 420 500] R=[500 676 870 1060 1205 1410 1565] After enter below codes it gives an error function...
A thin tungsten wire (i.e. a filament) is heated to a given temperature T. In the...
A thin tungsten wire (i.e. a filament) is heated to a given temperature T. In the visible range (i.e. wave length between 0.39µm and 0.77µm), Determine the following for the four cases listed below: (a) the band fraction of emitted radiation energy (b) the blackbody radiation energy emitted The four cases correspond to to following values of T: (i) T=500K (ii) T=1500K (iii)T=2500K (iv) T=3500K The melting temperature of tungsten is 3698K. Show all calculation details.
A given copper wire has a resistance of 5.10 ? at 20.0°C while a tungsten wire...
A given copper wire has a resistance of 5.10 ? at 20.0°C while a tungsten wire of the same diameter has a resistance of 4.67 ? at 20.0°C. At what temperature will the two wires have the same resistance?
In the case of temperature change from 25 C to 37 C: What are the changes...
In the case of temperature change from 25 C to 37 C: What are the changes in the microorganism regulation system? What effects would it have? In the case of B.subtulis that represses any sensor? What stimulus response would it have?
A wire made from tungsten is 4.5 m long and 0.45 mm in diameter. What is...
A wire made from tungsten is 4.5 m long and 0.45 mm in diameter. What is its resistance at 1500°C?
The resistivity of tungsten increases approximately linearly with temperature from 56.0 nΩ · m at 293...
The resistivity of tungsten increases approximately linearly with temperature from 56.0 nΩ · m at 293 K to 1.10 µΩ · m at 3500 K. A lightbulb is powered by a 120-V dc power supply. Under those operating conditions the temperature of the tungsten filament is 2500 K, the length of the filament is equal to 5.30 cm, and the power delivered to the filament is 36.4 W. Estimate the following. (a) the resistance of the filament Ω (b) the...
Q1) A metal wire has a resistance of 10.0 at a temperature of 20,0 °C. If...
Q1) A metal wire has a resistance of 10.0 at a temperature of 20,0 °C. If the same wire has a resistance of 12.0 at 90.0 °C, what is the resistance of this wire when its temperature is –40.0 °C? Q2) A parallel-plate capacitor filled with air carries a charge Q. The battery is disconnected, and a slab of material with dielectric constant k = 2 is inserted between the plates. Which of the following statements is true?
The air, which has a temperature of 120 ° C, flows over a plate with a...
The air, which has a temperature of 120 ° C, flows over a plate with a length of 1.2 m and a constant temperature of 30 ° C across the surface, and its speed flows at a speed of 2 m / s. According to this, a.) Calculate the speed and temperature boundary layer thickness at the end of the plate. b.) Find the local heat transfer coefficient and heat flux at the end of the plate. c.) Find the...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT