Question

In: Other

Two methanol–water mixtures are contained in separate flasks. The first mixture contains 40.0 wt% methanol, and...

Two methanol–water mixtures are contained in separate flasks. The first mixture contains
40.0 wt% methanol, and the second contains 70.0 wt% methanol. If 200 g of the first mixture is
combined with 150 g of the second, what are the mass and composition of the product?

Solutions

Expert Solution


Related Solutions

5. Would it be easier or harder to separate cyclohexane toluene mixture or water methanol mixture?...
5. Would it be easier or harder to separate cyclohexane toluene mixture or water methanol mixture? Explain your answer.
Two streams containing a mixture of methanol and water are to be distilled in a distillation...
Two streams containing a mixture of methanol and water are to be distilled in a distillation column operating at 1 atm. The first stream enters the column closer to the top as a saturated liquid at 73 °C, with a flow rate of 55 kmol/h. The second stream enters the column at the temperature of 90°C closer to the bottom, with a flow rate of 40 kmol/h, at the concentration of 30 mol% methanol. The bottoms stream leaving the reboiler...
A liquid mixture contains 60 wt% ethanol, 5 wt% of a dissolved solute, and the balance...
A liquid mixture contains 60 wt% ethanol, 5 wt% of a dissolved solute, and the balance water. A stream of this mixture is fed to a distillation column operating at steady state. The streams emerging from the column have equal mass flow rates. The top stream contains 90 wt% ethanol with no solute. Solve for all the mass fractions of the bottom stream and solve for the 3 mass flow rates
A process is carried out in which a mixture containing 25.0 wt% methanol, 42.5% ethanol, and...
A process is carried out in which a mixture containing 25.0 wt% methanol, 42.5% ethanol, and the balance water is seperated into two fractions. A technician draws and analyzes samples of both product streams and reports that one stream contains 39.8% methanol and 31.5% ethanol and the other contains 19.7% methanol and 41.2% ethanol. You examine the reported figures and tell the technician that they must be wrong and that stream analyses should be carried out again. (a) Prove your...
A liquid mixture contains 60.0 wt% ethanol (E), 5.0 wt% of a dissolved solute (S), and...
A liquid mixture contains 60.0 wt% ethanol (E), 5.0 wt% of a dissolved solute (S), and the balance water (W). A stream of this mixture is fed to a continuous distillation column operating at steady-state. Product streams emerge at the top and bottom of the column. The column design calls for the product streams to have equal mass flow rates and for the top stream to contain 90.0 wt% ethanol and no S. (Hint: In order to solve this problem,...
A gas contains 55.0 wt% methane, 5.00 wt% ethane, 35.0 wt% ethylene, and the balance water....
A gas contains 55.0 wt% methane, 5.00 wt% ethane, 35.0 wt% ethylene, and the balance water. If 100.0 kg/h of this fuel is to be burned with 30.0% excess air, what is the required air feed rate? in kmol/h What is the required feed rate if the combustion is only 75.0% complete? in kmol/h
You separated a mixture containing 20 wt% CH3OH, 35 wt% C2H5OH, and the balance water into...
You separated a mixture containing 20 wt% CH3OH, 35 wt% C2H5OH, and the balance water into two fractions. You then drew and analyzed samples of both product streams and reported that one stream contained 42.2% CH3OH and 29.3% C2H5OH and the other stream contained 16.5% CH3OH and 45.2% C2H5OH. After examining the report your professor indicated that the results must be wrong and asked you to repeat the stream analyses. Show why the professor is right
A quality mixture of water is contained in a piston cylinder system at a pressure of...
A quality mixture of water is contained in a piston cylinder system at a pressure of 3 bar. The initial volume of the system is 3 m3, and saturated liquid occupies 0.3 m3. Heat is added to the system and the volume is allowed to triple before a stop is reached. The final state of the system is at pressure of 30 bar. If the external pressure is 1 bar determine the followng: (a) The amount of heat added to...
A mixture contains only and . A 4.51-g sample of the mixture is dissolved in water...
A mixture contains only and . A 4.51-g sample of the mixture is dissolved in water and an excess of is added, producing a precipitate of . The precipitate is filtered, dried, and weighed. The mass of the precipitate is 1.06 g. What is the mass percent of in the sample? %
1. Obtain the equilibrium mole fractions (liquid and vapor) of a mixture of water, methanol and...
1. Obtain the equilibrium mole fractions (liquid and vapor) of a mixture of water, methanol and ethanol at 100 kPa and 70°C. You can assume the mixture is ideal. 2. Create one plot where the equilibrium mole fraction of benzene in the vapor phase is plotted against the equilibrium mole fraction of benzene in the liquid phase for three different pressures (0.2 bar, 0.6 bar and 1 bar). Comment on the effect of pressure on the relative volatility
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT