Question
In: Other
6.8 Raw natural gas flowing at 1000 mol/h contains 15.0 mol% CO2,5.00 mol% H2S, and 1.41...
6.8 Raw natural gas flowing at 1000 mol/h contains 15.0 mol% CO2,5.00 mol% H2S, and 1.41 mol% COS, and the balance is methane.The separations system shown in Problem Figure 6.8.1 is capable of handling a certain flow rate of raw natural gas. Any flow rate higher than this limit is sent into the bypass around the separation unit and then mixed with the treated gas to yield the final product. The final product is to contain no more than 1.00 mol% H2S and no more than 0.300 mol% COS. Stream 6 leaving the separation unit contains H2S and COS only. The separations unit maximum flow rate it can handle is 900 mol/h; any flow beyond this must go to the bypass system. Find out the flow rate of the treated natural gas stream and flow rate of the reject stream from the separator? (948.2, 51.8 mol/h)
Solutions
Amanda K answered 1 year agoRelated Solutions
200 MMscfd natural gas that contains 20vol% CO2 and no H2S is to be transported 60...
200 MMscfd natural gas that contains 20vol% CO2 and no H2S is to
be transported 60 miles through pipelines to a natural gas
liquefaction plant where gas sweetening and dehydration will take
place. Suggest:
Minimum specifications for the gas as it enters the
pipeline.
Suitable processing sequence for the field facility.
A buffer solution contains 0.72 mol of hydrosulfuric acid (H2S) and 0.70 mol of sodium hydrogen...
A buffer solution contains 0.72 mol of hydrosulfuric acid (H2S)
and 0.70 mol of sodium hydrogen sulfide (NaHS) in 8.60 L. The Ka of
hydrosulfuric acid (H2S) is Ka = 9.5e-08.
(a) What is the pH of this buffer?
pH =
(b) What is the pH of the buffer after the addition of 0.17 mol
of NaOH? (assume no volume change)
pH =
(c) What is the pH of the original buffer after the addition of
0.53 mol of HI?...
A 6.79-L cylinder contains 2.00 mol of gas A and 3.96 mol of gas B, at...
A 6.79-L cylinder contains 2.00 mol of gas A and 3.96 mol of gas
B, at a temperature of 31.5 °C. Calculate the partial pressure of
each gas in the cylinder. Assume ideal gas behavior.
The temperature of 2.00 mol of an ideal monatomic gas is raised 15.0 K at constant...
The temperature of 2.00 mol of an ideal monatomic gas is raised
15.0 K at constant volume. What are (a) the work W done by the gas,
(b) the energy transferred as heat Q , (c) the change
?Eint in the internal energy of the gas, and (d) the
change ?K in the average kinetic energy per atom
The temperature of 2.00 mol of an ideal monatomic gas is raised 15.0 K at constant...
The temperature of 2.00 mol of an ideal monatomic gas is raised
15.0 K at constant volume. What are (a) the work W done by the gas,
(b) the energy transferred as heat Q , (c) the change
?Eint in the internal energy of the gas, and (d) the
change ?K in the average kinetic energy per atom?
A gas mixture contains 0.650 mol of N2, 0.100 mol of H2, and 0.400 mol of...
A gas mixture contains 0.650 mol of N2, 0.100 mol of H2, and
0.400 mol of CH4. Calculate the pressure of the gas mixture and the
partial pressure of each constituent gas if the mixture is in a
11.0 L vessel at 27.00°C.
1) Total Pressure: 2.57 atm
2) Pressure of H2: ____ atm
3) Pressure of N2: ____ atm
4) Pressure of CH4: ___ atm
San Diego Gas & Electric provides natural gas composed of 92 mol% methane, 7.0 mol% ethane,...
San Diego Gas & Electric provides natural gas
composed of 92 mol% methane, 7.0 mol% ethane, & 1.0 mol%
nitrogen. 100 mol/hr of this gas is fed to a furnace with 30%
excess air. The fractional conversion of both methane and ethane is
only 90% and no NOx is formed. The selectivity (CO2:CO) is 20.
Using only component molar flow rates draw and label the process
flow diagram, show that there are 0 degrees of freedom, and write
down the...
A gas cylinder contains 2.30 mol He, 1.35 mol Ne, and 1.75 mol Ar. If the...
A gas cylinder contains 2.30 mol He, 1.35 mol Ne, and 1.75 mol
Ar. If the total pressure in the cylinder is 2290 mmHg, what is the
partial pressure of each of the components? Assume constant
temperature.
P(He) = ?
P(Ne) = ?
P (Ar) = ?
A 15.0-L tank containing 1.0 mol of argon gas is at 298 K. (a) Calculate the...
A 15.0-L tank containing 1.0 mol of argon gas is at 298 K.
(a) Calculate the initial pressure of the gas and d, the length
of the cube containing this volume.
(b) Using your value for d, calculate the energies of the two
lowest translational energies for the system E1,1,1 and E2,1,1 and
their differences ΔE .
(c) The tank is opened and the gas is allowed to expand rapidly
into a cubical 2000L room such that there is no heat...
Under constant pressure, the temperature of 2.00 mol of an ideal monotomic gas is raised 15.0...
Under constant pressure, the temperature of 2.00 mol of an ideal
monotomic gas is raised 15.0 K. What are a) the work done by the
gas b) energy transferred as heat Q c) the change Delta-Eint in the
internal energy of the gas, and d) the change Delta-K in the
average kinetic energy per atom
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- How many grams of Na2CO3 should be mixed with 5.00 g of NaHCO3 to produce 100...
- Given the following information for a monopolistic competitor: Demand: P = 78 – 5(Q) Marginal revenue:...
- Why does the auto industry prefer uniform (national) standards for automobile emissions as opposed to regionally...
- GOAL Apply the more general definition of torque. PROBLEM (a) A man applies a force of...
- a) If 8.00 hp are required to drive a 1800-kg automobile at 54.0 km/h on a...
- 23- Celsius Corp. is conducting a capital budgeting analysis to decide whether to invest in a...
- Using energy level diagrams, predict the relative stability of a Br2 molecule as well as the...
ADVERTISEMENT