In (Figure 1), the rod moves with a speed of 1.6 m/s on rails 29.0 cm...

In (Figure 1), the rod moves with a speed of 1.6 m/s on rails 29.0 cm apart. The rod has a resistance of 2.1 Ω . The magnetic field is 0.31 T , and the resistance of the U-shaped conductor is 26.0 Ω at a given instant.

Part A Calculate the induced emf

Part B Calculate the current in the U -shaped conductor.

Part C Calculate the external force needed to keep the rod's velocity constant at that instant.

Solutions

Expert Solution

genius_generous answered 1 week ago

Next > < Previous

Related Solutions

In the figure, a conducting rod of length L = 29.0 cm moves in a magnetic...

In the figure, a conducting rod of length L = 29.0 cm moves in a magnetic field B⃗ of magnitude 0.390 T directed into the plane of the figure. The rod moves with speed v = 6.00 m/s in the direction shown. When the charges in the rod are in equilibrium, what is the magnitude E of the electric field within the rod? What is the magnitude Vba of the potential difference between the ends of the rod? What is...

The bar shown in the figure below moves on rails to the right with a velocity...

The bar shown in the figure below moves on rails to the right with a velocity , and a uniform, constant magnetic field is directed out of the page. Which of the following statements are correct? (Select all that apply.) a.The induced current in the loop is zero. b.The induced current in the loop is clockwise. c.The induced current in the loop is counterclockwise. d.An external force is required to keep the bar moving at constant speed. e.No force is...

A 16-cm-long, zero-resistance slide wire moves outward, on zero-resistance rails, at a steady speed of 11...

A 16-cm-long, zero-resistance slide wire moves outward, on zero-resistance rails, at a steady speed of 11 m/sm/s in a 0.14 T magnetic field. On the opposite side, a 1.0 Ω carbon resistor completes the circuit by connecting the two rails. The mass of the resistor is 56 mg Part A What is the induced current in the circuit? Express your answer using two significant figures. Part B How much force is needed to pull the wire at this speed? Express...

A crate is given an initial speed of 2.6 m/s up the 29.0 ∘ plane shown...

A crate is given an initial speed of 2.6 m/s up the 29.0 ∘ plane shown in (Figure 1). Assume μk = 0.12.

The active element of a certain laser is made of a glass rod 29.0 cm long...

The active element of a certain laser is made of a glass rod 29.0 cm long and 1.40 cm in diameter. Assume the average coefficient of linear expansion of the glass is equal to 9.00 10-6 (°C)−1. The temperature of the rod increases by 62.0°C. (a) What is the increase in its length? . cm (b) What is the increase in its diameter?. cm (c) What is the increase in its volume? cm3

A rocket moves with a speed of 45 m / s. The rocket suddenly breaks into...

A rocket moves with a speed of 45 m / s. The rocket suddenly breaks into two parts of equal mass that fly at speeds v1 and v2. Obtain the magnitude of the velocity of each part in which the rocket broke.

Mass m = 0.1 kg moves to the right with speed v = 0.54 m/s and...

Mass m = 0.1 kg moves to the right with speed v = 0.54 m/s and collides with an equal mass initially at rest. After this inelastic collision the system retains a fraction = 0.9 of its original kinetic energy. If the masses remain in contact for 0.01 secs while colliding, what is the average force in N between the masses during the collision? Hints: All motion is in 1D. Ignore friction between the masses and the horizontal surface. You...

A tractor is pulling a drawbar tillage implement at a ground speed of 1.6 m/s. The...

A tractor is pulling a drawbar tillage implement at a ground speed of 1.6 m/s. The total rear axle static load is 35 kN, the wheelslip is 0.1, and the value of mobility number for the particular tyre and soil is 2.84. The driving tyre radius is 0.6 m, and the engine speed is 2100 rpm, and the overall gear transmission mechanical efficiency is 79%. Calculate the drawbar pull, drawbar power and the tractive efficiency Calculate the wheel axle power...

1.) A proton moves with a speed of 5.5 x 10^5 m/s along the +x axis....

1.) A proton moves with a speed of 5.5 x 10^5 m/s along the +x axis. It enters a region where there is uniform magnetic field of 1.5 T, directed of 30 degrees to the x-axis and lying in the x-y plane. Calculate the initial force and acceleration of the proton. 2.) A wire carries a current of 4.5-A in a direction of 35 degrees with respect to the direction of a magnetic field of 0.5 T. Find the magnitude...

A rod of mass 0.72 kg and radius 0.06 m rests on two parallel rails that...

A rod of mass 0.72 kg and radius 0.06 m rests on two parallel rails that are d = 0.12 m apart and L = 0.45 m long. The rod carries a current of I = 48 A. If it starts from rest, what is the speed of the rod as it leaves the rails if there is a uniform magnetic field of magnitude 0.24 T directed perpendicular to the rod and rails? Answer in units of m/s. ...

Subjects